Differences between revisions 15 and 18 (spanning 3 versions)

Output Mode-cleaner

Meetings

Shot noise increase due to the signal reduction by the OMC and residual spatial higher order modes after the OMC should be less than 5%.

TBD

TBD

-  ⇤ ← Revision 15 as of 2017-06-15 12:24:32 → 
  Size: 1120
  Editor: KentaroSomiya
  Comment:
+   ← Revision 18 as of 2017-10-25 14:07:25 → ⇥
  Size: 1192
  Editor: KentaroSomiya
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 15:
-=== Optical Design ===
+=== Optical Design (updated 17/10/25) ===
 Line 17:
-||OMMT1||12.48m||4.58mm||
||OMMT2||75.00m||2.62mm||
+||OMMT1||13.16m||4.58mm||
||OMMT2||44.39m||??mm||
 Line 22:
-||OMC3||1.89m||619um||
||OMC4||1.89m||619um||
+||OMC3||1.80m||619um||
||OMC4||1.80m||619um||
 Line 26:
-||SRM-OMMT1||6.0m||3.0deg||
||OMMT1-OMMT2||2.73m||3.0deg||
||OMMT2-OSTM||2.96m||TBA||
||OSTM-OMC1||0.20m||TBA||
||OMC1-OMC2||0.370m||TBA||
||OMC2-OMC3||0.380m||TBA||
||OMC3-OMC4||0.370m||TBA||
||OMC4-OMC1||0.380m||TBA||
+||SRM-OMMT1||5.63m||3.07deg||
||OMMT1-OMMT2||2.60m||3.07deg||
||OMMT2-OSTM||2.97m||90deg||
||OSTM-OBS1||0.30m||90deg||
||OBS1-OMC1||0.03m||0.078deg||
||OMC1-OMC2||0.357m||3.00deg||
||OMC2-OMC3||0.359m||3.00deg||
||OMC3-OMC4||0.357m||3.00deg||
||OMC4-OMC1||0.359m||3.00deg||