Differences between revisions 3 and 14 (spanning 11 versions)

IOO Optical Parameters

Under construction...

Mirror Location

Length

Incident Angles

Beam Sizes

MC waist

2.3887mm

Mirror Specs

MCi

HR Radius of Curvature	Flat (>100km)	As flat as possible
AR Radius of Curvature	Flat (>100km)	As flat as possible
AR Wedge Angle	2.5 (+/-0.0?)deg
Transmission@1064nm	0.0062 +0.00?/-0.0
HR Loss@1064nm	<100ppm
AR Reflectivity@1064nm	?00(+100/-0)ppm
Diameter	100mm	or slightly less
Thickness	30mm

MCo

HR Radius of Curvature	Flat (>100km)	As flat as possible
AR Radius of Curvature	Flat (>100km)	As flat as possible
AR Wedge Angle	2.5 (+/-0.0?)deg
Transmission@1064nm	0.0062 +0.00?/-0.0
HR Loss@1064nm	<100ppm
AR Reflectivity@1064nm	?00(+100/-0)ppm
Diameter	100mm	or slightly less
Thickness	30mm

MCe

HR Radius of Curvature	37.3(+/-0.1)m	0.5% error
AR Radius of Curvature	Flat (>100km)	As flat as possible
AR Wedge Angle	0.0??+0/-0.0?deg
Transmission@1064nm	0.00?? +0.00?/-0.0
HR Loss@1064nm	<100ppm
AR Reflectivity@1064nm	?00(+100/-0)ppm
Diameter	100mm	or slightly less
Thickness	60mm?

MMT1 (bKAGRA)

HR Radius of Curvature	-8.953(+/-0.1)m
AR Radius of Curvature	Flat (>100km)	As flat as possible
AR Wedge Angle	0.3(+/-??)deg
Transmission@1064nm	1500ppm<T<2000ppm
HR Loss@1064nm	<1000ppm
AR Reflectivity@1064nm	<0.1%
AR Reflectivity@670nm	>40%
Diameter	100mm?
Thickness	30mm?

MMT2 (bKAGRA)

HR Radius of Curvature	13.910(+/-0.1)m
AR Radius of Curvature	Flat (>100km)	As flat as possible
AR Wedge Angle	0.3(+/-??)deg
Transmission@1064nm	200ppm<T<400ppm
HR Loss@1064nm	<1000ppm
AR Reflectivity@1064nm	<0.1%
AR Reflectivity@670nm	>40%
Diameter	100mm?
Thickness	30mm?

MMT1 (iKAGRA)

HR Radius of Curvature	Flat
AR Radius of Curvature	Flat
AR Wedge Angle	0.0??+0/-0.0?deg
Transmission@1064nm	0.00?? +0.00?/-0.0
HR Loss@1064nm	<100ppm
AR Reflectivity@1064nm	?00(+100/-0)ppm
Diameter	???mm
Thickness	??mm?

MMT2 (iKAGRA)

HR Radius of Curvature	Flat
AR Radius of Curvature	Flat
AR Wedge Angle	0.0??+0/-0.0?deg
Transmission@1064nm	0.00?? +0.00?/-0.0
HR Loss@1064nm	<100ppm
AR Reflectivity@1064nm	?00(+100/-0)ppm
Diameter	???mm
Thickness	??mm?

IFI

KAGRA/Subgroups/IOO/OptParam (last edited 2022-02-09 11:47:14 by matteo.leonardi)

-  ⇤ ← Revision 3 as of 2014-06-11 17:09:29 → 
  Size: 1062
  Editor: KentaroSomiya
  Comment:
+   ← Revision 14 as of 2014-06-11 19:27:13 → ⇥
  Size: 2839
  Editor: KentaroSomiya
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 6:
+== Mirror Location ==
=== Length ===

=== Incident Angles ===

=== Beam Sizes ===
||MC waist ||2.3887mm || ||


----
-Line 7:
+Line 17:
-=== MC Mirrors ===
-Line 11:
+Line 20:
-||AR Wedge Angle ||0.0??+0/-0.0?deg || ||
+||AR Wedge Angle ||2.5 (+/-0.0?)deg || ||
-Line 14:
+Line 23:
-||AR Reflectivity@1064nm ||200(+100/-0)ppm || ||
+||AR Reflectivity@1064nm ||?00(+100/-0)ppm || ||
||Diameter ||100mm ||or slightly less ||
||Thickness ||30mm || ||
-Line 19:
+Line 30:
-||AR Wedge Angle ||0.0??+0/-0.0?deg || ||
+||AR Wedge Angle ||2.5 (+/-0.0?)deg || ||
-Line 22:
+Line 33:
-||AR Reflectivity@1064nm ||200(+100/-0)ppm || ||
+||AR Reflectivity@1064nm ||?00(+100/-0)ppm || ||
||Diameter ||100mm ||or slightly less ||
||Thickness ||30mm || ||
-Line 25:
+Line 38:
-||HR Radius of Curvature ||37.3(+/-???)m ||0.5% error ||
+||HR Radius of Curvature ||37.3(+/-0.1)m ||0.5% error ||
-Line 28:
+Line 41:
-||Transmission@1064nm ||0.0062 +0.00?/-0.0 || ||
+||Transmission@1064nm ||0.00?? +0.00?/-0.0 || ||
-Line 30:
+Line 43:
-||AR Reflectivity@1064nm ||200(+100/-0)ppm || ||
+||AR Reflectivity@1064nm ||?00(+100/-0)ppm || ||
||Diameter ||100mm ||or slightly less ||
||Thickness ||60mm? || ||

'''MMT1 (bKAGRA)'''
||HR Radius of Curvature ||-8.953(+/-0.1)m || ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||0.3(+/-??)deg || ||
||Transmission@1064nm ||1500ppm<T<2000ppm || ||
||HR Loss@1064nm ||<1000ppm || ||
||AR Reflectivity@1064nm ||<0.1% || ||
||AR Reflectivity@670nm ||>40% || ||
||Diameter ||100mm? || ||
||Thickness ||30mm? || ||

'''MMT2 (bKAGRA)'''
||HR Radius of Curvature ||13.910(+/-0.1)m || ||
||AR Radius of Curvature ||Flat (>100km) ||As flat as possible ||
||AR Wedge Angle ||0.3(+/-??)deg || ||
||Transmission@1064nm ||200ppm<T<400ppm || ||
||HR Loss@1064nm ||<1000ppm || ||
||AR Reflectivity@1064nm ||<0.1% || ||
||AR Reflectivity@670nm ||>40% || ||
||Diameter ||100mm? || ||
||Thickness ||30mm? || ||

'''MMT1 (iKAGRA)'''
||HR Radius of Curvature ||Flat || ||
||AR Radius of Curvature ||Flat || ||
||AR Wedge Angle ||0.0??+0/-0.0?deg || ||
||Transmission@1064nm ||0.00?? +0.00?/-0.0 || ||
||HR Loss@1064nm ||<100ppm || ||
||AR Reflectivity@1064nm ||?00(+100/-0)ppm || ||
||Diameter ||???mm || ||
||Thickness ||??mm? || ||

'''MMT2 (iKAGRA)'''
||HR Radius of Curvature ||Flat || ||
||AR Radius of Curvature ||Flat || ||
||AR Wedge Angle ||0.0??+0/-0.0?deg || ||
||Transmission@1064nm ||0.00?? +0.00?/-0.0 || ||
||HR Loss@1064nm ||<100ppm || ||
||AR Reflectivity@1064nm ||?00(+100/-0)ppm || ||
||Diameter ||???mm || ||
||Thickness ||??mm? || ||

'''IFI'''