Differences between revisions 1 and 20 (spanning 19 versions)

KAGRA Output Optical Tables

iKAGRA

MC front: 1.2 x 2.4m x h 0.940m (close to MCF chamber; beam height=1.134m - 0.012m)

MCT: 1m x 1m x h 0.955m (close to MCE chamber; beam height=1.149m - 0.027m)

REFL: 1.2 x 2.4m x h 0.947m (close to IFI chamber; beam height=1.141m - 0.019m)

IMMT2: 1m x 1m x h 0.947m (temporary) (close to IFI chamber; beam height=1.141m - 0.019m)

SR2: 1m x 1m x h 1.000m (temporary for iKAGRA AS) (close to SR2 chamber; beam height=1.217m)

ETMX: 1m x 1m x h 0.986m (temporary) (close to EXA chamber; beam height=1.200m)

ETMY: 1m x 1m x h 0.986m (temporary) (close to EYA chamber; beam height=1.200m)

bKAGRA

POX: 1m x 1m x h 1.043m (temporary) (close to SR3 chamber; beam height=1.257m)

POY: 1m x 1m x h 0.936m (temporary) (close to PR3 chamber; beam height=1.150m)

POP: 1.2 x 2.4m x h 0.970m (close to PR2 chamber; beam height=1.184m)

POS: 1.2 x 2.4m x h 1.000m (close to SR2 chamber; beam height=1.217m)

AS: 1.2 x 2.4m x h 1.000m (close to SRM chamber; beam height=1.271m)

* Beam height written here is from the mortar surface. * Mortar thickness is about 20mm by design. * Difference between the beam height from the concrete surface and the height of the optical table should be larger than 7.6 inch (0.19m)

-  ⇤ ← Revision 1 as of 2014-07-17 16:41:54 → 
  Size: 317
  Editor: YoichiAso
  Comment:
+   ← Revision 20 as of 2014-08-11 14:59:01 → ⇥
  Size: 1301
  Editor: YutaMichimura
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
-MC front: 1.2 x 2.4m
MCT: 1m x 1m
REFL: 1.2 x 2.4m
POX: 1m x 1m
IMMT2: 1m x 1m (temporary)
SR2: 1m x 1m (temporary for iKAGRA AS)
ETMX: 1m x 1m (temporary)
ETMY: 1m x 1m (temporary)
+MC front: 1.2 x 2.4m x h 0.940m
(close to MCF chamber; beam height=1.134m - 0.012m)

MCT: 1m x 1m x h 0.955m
(close to MCE chamber; beam height=1.149m - 0.027m)

REFL: 1.2 x 2.4m x h 0.947m
(close to IFI chamber; beam height=1.141m - 0.019m)

IMMT2: 1m x 1m x h 0.947m (temporary)
(close to IFI chamber; beam height=1.141m - 0.019m)

SR2: 1m x 1m x h 1.000m (temporary for iKAGRA AS)
(close to SR2 chamber; beam height=1.217m)

ETMX: 1m x 1m x h 0.986m (temporary)
(close to EXA chamber; beam height=1.200m)

ETMY: 1m x 1m x h 0.986m (temporary)
(close to EYA chamber; beam height=1.200m)
-Line 13:
+Line 25:
-POY: 1m x 1m
POP: 1.2 x 2.4m
POS: 1.2 x 2.4m
AS: 1.2 x 2.4m
+POX: 1m x 1m x h 1.043m (temporary)
(close to SR3 chamber; beam height=1.257m)

POY: 1m x 1m x h 0.936m (temporary)
(close to PR3 chamber; beam height=1.150m)

POP: 1.2 x 2.4m x h 0.970m
(close to PR2 chamber; beam height=1.184m)

POS: 1.2 x 2.4m x h 1.000m
(close to SR2 chamber; beam height=1.217m)

AS: 1.2 x 2.4m x h 1.000m
(close to SRM chamber; beam height=1.271m)


* Beam height written here is from the mortar surface.
* Mortar thickness is about 20mm by design.
* Difference between the beam height from the concrete surface and the height of the optical table should be larger than 7.6 inch (0.19m)