Differences between revisions 24 and 26 (spanning 2 versions)

KAGRA Output Optical Tables

iKAGRA

name	size and height	closest chamber	beam height	q-param/position/angle of the beams
MC front	1.2 x 2.4m x h 0.940m	MCF chamber	1.134m - 0.012m	IMC REFL:1.5014+16.8465i/1189mm from PSL side edge/88deg
MCT	1m x 1m x h 0.955m	MCE chamber	1.149m - 0.027m	IMC TRANS:27.9717+16.8465i/465mm from PSL side edge/89deg
REFL	1.2 x 2.4m x h 0.947m	IFI chamber	1.141m - 0.019m
IMMT2	1m x 1m x h 0.947m (temporary)	IFI chamber	1.141m - 0.019m
SR2	1m x 1m x h 1.000m (temporary for iKAGRA AS)	SR2 chamber	1.217m
ETMX	1m x 1m x h 0.986m (temporary)	EXA chamber	1.200m
ETMY	1m x 1m x h 0.986m (temporary)	EYA chamber	1.200m

* Beam height written here is from the mortar surface.

* Mortar thickness is about 20mm by design.

* Difference between the beam height from the concrete surface and the height of the optical table should be larger than 7.6 inch (0.19m)

-  ⇤ ← Revision 24 as of 2014-11-07 14:32:19 → 
  Size: 1430
  Editor: YutaMichimura
  Comment:
+   ← Revision 26 as of 2014-11-26 13:16:48 → ⇥
  Size: 1540
  Editor: YutaMichimura
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
-||name ||size and height ||closest chamber ||beam height ||q-params/position/angle of the beams ||
||MC front || 1.2 x 2.4m x h 0.940m ||MCF chamber || 1.134m - 0.012m || ||
||MCT || 1m x 1m x h 0.955m ||MCE chamber || 1.149m - 0.027m || ||
+||name ||size and height ||closest chamber ||beam height ||q-param/position/angle of the beams ||
||MC front || 1.2 x 2.4m x h 0.940m ||MCF chamber || 1.134m - 0.012m ||IMC REFL:1.5014+16.8465i/1189mm from PSL side edge/88deg||
||MCT || 1m x 1m x h 0.955m ||MCE chamber || 1.149m - 0.027m ||IMC TRANS:27.9717+16.8465i/465mm from PSL side edge/89deg||