Differences between revisions 27 and 65 (spanning 38 versions)
⇤ ← Revision 27 as of 2014-12-22 13:10:53 →
Size: 1550
Editor: YutaMichimura
Comment:
← Revision 65 as of 2018-09-10 12:44:43 → ⇥
Size: 3219
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:

- [[KAGRA/Subgroups/IOO/OutputTables/Optics| Optics for Output Tables]]
Line 3: Line 6:
||name ||size and height ||closest chamber ||beam height ||q-param/position/angle of the beams ||
||MC front || 1.2 x 2.4m x h 0.940m ||MCF chamber || 1.134m - 0.012m ||IMC REFL:1.5165+16.8465i/1189mm from PSL side edge/87.6034deg||
||MCT || 1m x 1m x h 0.955m ||MCE chamber || 1.149m - 0.027m ||IMC TRANS:27.9850+16.8465i/465mm from PSL side edge/88.6689deg||
||REFL || 1.2 x 2.4m x h 0.947m ||IFI chamber || 1.141m - 0.019m || ||
||IMMT2 || 1m x 1m x h 0.947m (temporary) ||IFI chamber || 1.141m - 0.019m || ||
||SR2 || 1m x 1m x h 1.000m (temporary for iKAGRA AS) ||SR2 chamber || 1.217m || ||
||ETMX || 1m x 1m x h 0.986m (temporary) ||EXA chamber || 1.200m || ||
||ETMY || 1m x 1m x h 0.986m (temporary) ||EYA chamber || 1.200m || ||		 ||name ||size and height ||closest chamber ||beam height ||optical layout drawing / status ||
||IMC REFL ||1m x 1m x h 0.940m (CL-1010TS) ||MCF chamber ||1.134m - 0.012m ||[[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=3412|JGW-D1503412]] / to be used for POY (or POX) for bKAGRA, purchased(2015/9), installed ||
||MCT ||1m x 1m x h 0.955m ||MCE chamber ||1.149m - 0.027m ||[[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=3412|JGW-D1503412]] / purchased(2014/10), installed ||
||REFL ||1m x 1m x h 0.947m (CL-1010TS) ||IFI chamber ||1.141m - 0.019m ||to be used for POX (or POY) for bKAGRA, purchased(2015/9), returned from VIS (2016/2) ||
||IMMT1T ||300mm x 400mm + extension(250mm x 300mm) (breadboard on pylon) ||MMT chamber ||??? ||installed([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=862|klog #862]]) ||
Line 15: Line 15:
||POX || 1m x 1m x h 1.043m (temporary) || SR3 chamber || 1.257m || ||
||POY || 1m x 1m x h 0.936m (temporary) || PR3 chamber || 1.150m || ||
||POP || 1.2 x 2.4m x h 0.970m || PR2 chamber || 1.184m || ||
||POS || 1.2 x 2.4m x h 1.000m || SR2 chamber || 1.217m || ||
||AS || 1.2 x 2.4m x h 1.000m || SRM chamber || 1.271m || ||		 ||IMC REFL ||1.2m x 2.4m x h 0.940m ||MCF chamber -Y ||1.134m - 0.012m ||[[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=3412|JGW-D1503412]] / used for IMC REFL (2016/11),purchased(2014/10) ||
||REFL ||1.2m x 2.4m x h 0.947m ||IFI chamber -Y ||1.141m - 0.019m ||installed(2017/2); was used at Kashiwa ; purchased(2015/9) ||
||IMMT2 ||1m x 1m x h 0.947m (CL-1010TS) ||IFI chamber +Y ||1.141m - 0.019m ||VIS is borrowing now, purchased(2014/10) ||
||ETMX ||1.2m　x　2.0m x h 1.006m ||EXT chamber +X (table is put on mortar surface) ||1.200m ||brought to Xend(2017/2/23);size confirmed(2016/7/11) ||
||ETMY ||1.2m　x　2.0m x h 1.006m ||EYT chamber +Y (table is put on mortar surface) ||1.200m ||brought to Yend(2017/2/24);size confirmed(2016/7/11) ||
||POX ||1m x 1m x h 1.043m (CL-1010TS) ||SR3 chamber -X (-X side is more spacious) ||1.257m ||will be used for AS for bKAGRAp1, used for REFL in iKAGRA, purchased(2015/9) ||
||POY ||1m x 1m x h 0.936m (CL-1010TS) ||PR3 chamber +Y ||1.150m ||used for IMC REFL in iKAGRA->now used as workbench for IMMT work, purchased(2015/9) ; anchor holes are at -Y side, but anchors are not needed and it should be at +Y for VIS work(2017/4/14)||
||POP ||1.2m x 2.4m x h 0.9645m ||PR2 chamber -Y ||1.204m from concrete floor ||now at outside of MCF clean booth;reuse iKAGRA PSL table instead of buying a new one ||
||POS ||1.2m x 2.4m x h 1.018m ||SR2 chamber -X ||1.212m from concrete floor ||now at OMMT chamber;height confirmed(2016/11/14) ||
||AS ||1.2m x 2.4m x h 1.078m ||OMC chamber +X (table is put on mortar surface) ||1.272m ||installed(2017/3/23);height confirmed(2016/11/14) ||
Line 21: Line 26:
* Beam height written here is from the mortar surface.
* Beam height written here is from the mortar surface unless otherwise noted.
Line 25: Line 31:
* Difference between the beam height from the concrete surface and the height of the optical table should be larger than 7.6 inch (0.19m) * Difference between the beam height from the floor (concrete surface or mortar surface) and the height of the optical table should be larger than 7.6 inch (0.19m)
Line 28: Line 34:

* iKAGRA AS table is omitted because we are not using AS port for iKAGRA 3km Michelson

KAGRA Output Optical Tables

- Optics for Output Tables

iKAGRA

name

size and height

closest chamber

beam height

optical layout drawing / status

IMC REFL

1m x 1m x h 0.940m (CL-1010TS)

MCF chamber

1.134m - 0.012m

JGW-D1503412 / to be used for POY (or POX) for bKAGRA, purchased(2015/9), installed

MCT

1m x 1m x h 0.955m

MCE chamber

1.149m - 0.027m

JGW-D1503412 / purchased(2014/10), installed

REFL

1m x 1m x h 0.947m (CL-1010TS)

IFI chamber

1.141m - 0.019m

to be used for POX (or POY) for bKAGRA, purchased(2015/9), returned from VIS (2016/2)

IMMT1T

300mm x 400mm + extension(250mm x 300mm) (breadboard on pylon)

MMT chamber

???

installed(klog #862)

bKAGRA

name

size and height

closest chamber

beam height

IMC REFL

1.2m x 2.4m x h 0.940m

MCF chamber -Y

1.134m - 0.012m

JGW-D1503412 / used for IMC REFL (2016/11),purchased(2014/10)

REFL

1.2m x 2.4m x h 0.947m

IFI chamber -Y

1.141m - 0.019m

installed(2017/2); was used at Kashiwa ; purchased(2015/9)

IMMT2

1m x 1m x h 0.947m (CL-1010TS)

IFI chamber +Y

1.141m - 0.019m

VIS is borrowing now, purchased(2014/10)

ETMX

1.2m　x　2.0m x h 1.006m

EXT chamber +X (table is put on mortar surface)

1.200m

brought to Xend(2017/2/23);size confirmed(2016/7/11)

ETMY

1.2m　x　2.0m x h 1.006m

EYT chamber +Y (table is put on mortar surface)

1.200m

brought to Yend(2017/2/24);size confirmed(2016/7/11)

POX

1m x 1m x h 1.043m (CL-1010TS)

SR3 chamber -X (-X side is more spacious)

1.257m

will be used for AS for bKAGRAp1, used for REFL in iKAGRA, purchased(2015/9)

POY

1m x 1m x h 0.936m (CL-1010TS)

PR3 chamber +Y

1.150m

used for IMC REFL in iKAGRA->now used as workbench for IMMT work, purchased(2015/9) ; anchor holes are at -Y side, but anchors are not needed and it should be at +Y for VIS work(2017/4/14)

POP

1.2m x 2.4m x h 0.9645m

PR2 chamber -Y

1.204m from concrete floor

now at outside of MCF clean booth;reuse iKAGRA PSL table instead of buying a new one

POS

1.2m x 2.4m x h 1.018m

SR2 chamber -X

1.212m from concrete floor

now at OMMT chamber;height confirmed(2016/11/14)

AS

1.2m x 2.4m x h 1.078m

OMC chamber +X (table is put on mortar surface)

1.272m

installed(2017/3/23);height confirmed(2016/11/14)

* Beam height written here is from the mortar surface unless otherwise noted.

* Mortar thickness is about 20mm by design.

* Difference between the beam height from the floor (concrete surface or mortar surface) and the height of the optical table should be larger than 7.6 inch (0.19m)

* See JGW-D1402607

* iKAGRA AS table is omitted because we are not using AS port for iKAGRA 3km Michelson

KAGRA/Subgroups/IOO/OutputTables (last edited 2022-05-11 06:27:47 by ChenDan)