Differences between revisions 1 and 14 (spanning 13 versions)

klog list for the second visit

KAGRA/Subgroups/IOO/TiltSensor/Documents2 (last edited 2018-07-11 14:11:24 by KeikoKokeyama)

-  ⇤ ← Revision 1 as of 2017-02-24 10:44:56 → 
  Size: 36
  Editor: KeikoKokeyama
  Comment:
+   ← Revision 14 as of 2017-03-02 15:09:33 → ⇥
  Size: 990
  Editor: KeikoKokeyama
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
+==== Preparation ====
http://klog.icrr.u-tokyo.ac.jp/osl/?r=2486

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2503

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2505

==== Position dependency of Tiltsensor ====
http://klog.icrr.u-tokyo.ac.jp/osl/?r=2512

==== Hitting test for PIT 5 Hz peak ====
http://klog.icrr.u-tokyo.ac.jp/osl/?r=2516

==== Actuator Calibration ====
http://klog.icrr.u-tokyo.ac.jp/osl/?r=2528

==== Oplev spectra with various conditions ====
http://klog.icrr.u-tokyo.ac.jp/osl/?r=2529

==== Limiting noise of oplev ====
http://klog.icrr.u-tokyo.ac.jp/osl/?r=2532

==== Oplev quick calibration ====
 * tilt for pit is 0.316[mm/cts]  and its error is 0.0546[mm/cts] .
 * tilt for yaw is -0.249[mm/cts] and its error is 0.0105[mm/cts]
 * data [[attachment:oplev_cal.xlsx]]

==== Linearity of Oplev from old klogs ====
 * 1mm on QPD
 * ref: http://klog.icrr.u-tokyo.ac.jp/osl/uploads/1427_20160407225650_exacalib.pdf