Differences between revisions 10 and 23 (spanning 13 versions)

klog list for the second visit

KAGRA/Subgroups/IOO/TiltSensor/Documents2 (last edited 2018-07-11 14:11:24 by KeikoKokeyama)

-  ⇤ ← Revision 10 as of 2017-03-01 09:28:29 → 
  Size: 606
  Editor: KeikoKokeyama
  Comment:
+   ← Revision 23 as of 2018-07-11 14:11:24 → ⇥
  Size: 1458
  Editor: KeikoKokeyama
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
+==== Preparation ====
-Line 22:
+Line 24:
+==== Oplev quick calibration ====
 * tilt for pit is 0.316[mm/cts]  and its error is 0.0546[mm/cts] .
 * tilt for yaw is -0.249[mm/cts] and its error is 0.0105[mm/cts]
 * data [[attachment:oplev_cal.xlsx]]
 * [[http://klog.icrr.u-tokyo.ac.jp/osl/uploads/569_20160105075840_oplevcalib.pdf|Old oplev calibration by Narita-kun]]

==== Linear rnage of Oplev from old klogs ====
 * 1.5 mm on QPD
 * ref: http://klog.icrr.u-tokyo.ac.jp/osl/uploads/1427_20160407225650_exacalib.pdf
 * Re-calibration and linearity check http://klog.icrr.u-tokyo.ac.jp/osl/?r=3175

==== Kyuman's memo for sensitivity ====
[[attachment:sensitivity_v1.pdf|Kyuman's Note 1]]
[[attachment:sensitivity_calculation.pdf|Kyuman's Note 2]]

==== June Gyu's presentation at KIW4 ====
 [[attachment:Tiltsensor_KIW4_Park.pdf|Presentation file]]