Differences between revisions 11 and 13 (spanning 2 versions)
⇤ ← Revision 11 as of 2017-03-01 09:28:49 →
Size: 631
Editor: KeikoKokeyama
Comment:
← Revision 13 as of 2017-03-02 15:03:19 → ⇥
Size: 890
Editor: KeikoKokeyama
Comment:
Deletions are marked like this. Additions are marked like this.
Line 24: Line 24:

==== Oplev quick calibration ====
 * tilt for pit is 0.316[mm/cts] and its error is 0.0546[mm/cts] .
 * tilt for yaw is -0.249[mm/cts] and its error is 0.0105[mm/cts]
 * data [[attachment:oplev_cal.xlsx]]

==== Linearity of Oplev from old klogs ====

klog list for the second visit

Preparation

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2486

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2503

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2505

Position dependency of Tiltsensor

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2512

Hitting test for PIT 5 Hz peak

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2516

Actuator Calibration

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2528

Oplev spectra with various conditions

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2529

Limiting noise of oplev

http://klog.icrr.u-tokyo.ac.jp/osl/?r=2532

Oplev quick calibration

  • tilt for pit is 0.316[mm/cts] and its error is 0.0546[mm/cts] .
  • tilt for yaw is -0.249[mm/cts] and its error is 0.0105[mm/cts]

  • data oplev_cal.xlsx

Linearity of Oplev from old klogs

KAGRA/Subgroups/IOO/TiltSensor/Documents2 (last edited 2018-07-11 14:11:24 by KeikoKokeyama)