Differences between revisions 13 and 14
Revision 13 as of 2022-07-14 16:09:58
Size: 578
Comment:
Revision 14 as of 2022-07-14 16:23:40
Size: 701
Comment:
Deletions are marked like this. Additions are marked like this.
Line 8: Line 8:
=== Channel names ===
 * K1:PSL-LAS_START
 * K1:PSL-LAS_STOP
 * K1:PSL-LAS_RUN
 * K1:PSL-LAS_SHUTTER
 * K1:PSL-LAS_ELEC_TEMP
 * K1:PSL-LAS_AMP1_TEMP

 * K1:PSL-LAS_HEATSINK1_TEMP
 * K1:PSL-LAS_AMP2_TEMP
 * K1:PSL-LAS_PD1
 * K1:PSL-LAS_PD2
 * K1:PSL-LAS_PD3
 * K1:PSL-LAS_PD4
=== Channel names (updated every 1 sec.) ===
 * K1:PSL-LAS_START - 0 or 1
 * K1:PSL-LAS_STOP - 0 or 1
 * K1:PSL-LAS_RUN - 0 or 1
 * K1:PSL-LAS_SHUTTER - 0 or 1
 * K1:PSL-LAS_ELEC_TEMP - float
 * K1:PSL-LAS_AMP1_TEMP - float

 * K1:PSL-LAS_HEATSINK1_TEMP - float
 * K1:PSL-LAS_AMP2_TEMP - float
 * K1:PSL-LAS_PD1 - float
 * K1:PSL-LAS_PD2 - float
 * K1:PSL-LAS_PD3 - float
 * K1:PSL-LAS_PD4 - float

New High power Laser system (50W)

IP address

  • 10.68.10.6 k1lasepics - epics Ioc server for laser (mini PC at PSL room)DSC_0251.jpeg

  • 10.68.10.8 k1las1 - 1st laser control (now in PSL room)
  • 10.68.10.9 k1las2 - 2nd laser control (to be installed)

Channel names (updated every 1 sec.)

  • K1:PSL-LAS_START - 0 or 1
  • K1:PSL-LAS_STOP - 0 or 1
  • K1:PSL-LAS_RUN - 0 or 1
  • K1:PSL-LAS_SHUTTER - 0 or 1
  • K1:PSL-LAS_ELEC_TEMP - float
  • K1:PSL-LAS_AMP1_TEMP - float
  • K1:PSL-LAS_HEATSINK1_TEMP - float
  • K1:PSL-LAS_AMP2_TEMP - float
  • K1:PSL-LAS_PD1 - float
  • K1:PSL-LAS_PD2 - float
  • K1:PSL-LAS_PD3 - float
  • K1:PSL-LAS_PD4 - float

KAGRA/Subgroups/LAS/HPL (last edited 2022-07-14 16:23:40 by SadakazuHaino)