Diff for "KAGRA/Subgroups/LAS/HPL"

Differences between revisions 2 and 14 (spanning 12 versions)

New High power Laser system (50W)

IP address

10.68.10.6 k1lasepics - epics Ioc server for laser (mini PC at PSL room)DSC_0251.jpeg
10.68.10.8 k1las1 - 1st laser control (now in PSL room)
10.68.10.9 k1las2 - 2nd laser control (to be installed)

-  ⇤ ← Revision 2 as of 2022-07-13 15:40:26 → 
  Size: 751
  Editor: SadakazuHaino
  Comment:
+   ← Revision 14 as of 2022-07-14 16:23:40 → ⇥
  Size: 701
  Editor: SadakazuHaino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
- * 10.68.10.6 k1lasepics (currently k1las2) - epics Ioc 
 * 10.68.10.6 k1las1 (currently k1las0) - 1st laser control (now in PSL room)
 * 10.68.10.6 k1las2 (currently k1las1) - 2nd laser control (to be installed)
+ * 10.68.10.6 k1lasepics - epics Ioc server for laser (mini PC at PSL room)[[attachment:DSC_0251.jpeg]] 
 * 10.68.10.8 k1las1 - 1st laser control (now in PSL room)
 * 10.68.10.9 k1las2 - 2nd laser control (to be installed)
 Line 8:
-=== channel names ===
 * LAS:start
 * LAS:stop")
 * LAS:run")
 * LAS:shutter")
 * LAS:temp1")
 * LAS:temp2")
 * LAS:temp3")
 * LAS:temp4")
 * LAS:PD1")
 * LAS:PD2")
 * LAS:PD3")
 * LAS:PD4")

 * Laser start")
 * Laser stop")
 * Laser run")
 * Laser shutter open")
 * Laser temperature (1)")
 * Laser temperature (2)")
 * Laser temperature (3)")
 * Laser temperature (4)")
 * Laser PD (1)")
 * Laser PD (2)")
 * Laser PD (3)")
 * Laser PD (4)")
+=== Channel names (updated every 1 sec.) ===
 * K1:PSL-LAS_START - 0 or 1
 * K1:PSL-LAS_STOP - 0 or 1
 * K1:PSL-LAS_RUN - 0 or 1
 * K1:PSL-LAS_SHUTTER - 0 or 1
 * K1:PSL-LAS_ELEC_TEMP - float
 * K1:PSL-LAS_AMP1_TEMP - float
 * K1:PSL-LAS_HEATSINK1_TEMP - float
 * K1:PSL-LAS_AMP2_TEMP - float
 * K1:PSL-LAS_PD1 - float
 * K1:PSL-LAS_PD2 - float
 * K1:PSL-LAS_PD3 - float
 * K1:PSL-LAS_PD4 - float