Differences between revisions 16 and 20 (spanning 4 versions)
Revision 16 as of 2019-07-17 16:19:16
Size: 736
Editor: KiwamuIzumi
Comment:
Revision 20 as of 2019-07-18 09:22:02
Size: 1109
Editor: KiwamuIzumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 16: Line 16:
  || ''' Frequency [Hz] ''' || ''' Measured Frequency noise [Hz/Hz^1/2] ''' || ''' Equivalent Phase noise [dBc/Hz] ''' || '''ROS-109-919 spec [dBc/Hz]'''||
  || 0.01 || 5 || 51 || --||
  || 0.1 || 4 || || -- ||
  || 1 || 0.1 || || -- ||
  || 10 || 0.05 || || -- ||
  || 100 || 0.05 || || -- ||
  || 1,000 || 0.05 || || -- ||
  || 10,000 || 0.03 || || -- ||

Low Noise VCOs

Descriptions

Low phase noise, a center frequency of 70 MHz, actuation range of several 100 kHz, aaa dBm output


Prototype model


  • Designed by Y. Enomoto (2018), inspired by LIGO low noise VCOs. JGW-D1808968

Frequency Noise

  • Worse than the specification for the non-divided phase noise (klog 7425).

  • Measured freq. noise (klog 7425)

    • Frequency [Hz]

      Measured Frequency noise [Hz/Hz^1/2]

      Equivalent Phase noise [dBc/Hz]

      ROS-109-919 spec [dBc/Hz]

      0.01

      5

      51

      --

      0.1

      4

      --

      1

      0.1

      --

      10

      0.05

      --

      100

      0.05

      --

      1,000

      0.05

      --

      10,000

      0.03

      --

Tuning Range


Endeavour model


  • Sophisticated version of the prototype model.

Bill of Materials

KAGRA/Subgroups/MIF/AEL/LowNoiseVCOs (last edited 2019-11-12 11:32:54 by KiwamuIzumi)