Differences between revisions 18 and 29 (spanning 11 versions)
Revision 18 as of 2019-07-17 16:32:22
Size: 962
Editor: KiwamuIzumi
Comment:
Revision 29 as of 2019-07-18 09:36:11
Size: 1651
Editor: KiwamuIzumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 12: Line 12:
=== Frequency Noise ===
 * Worse than the specification for the non-divided phase noise ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7425|klog 7425]]).
=== Noise performance ===
 * Worse than the specification for the non-divided phase noise ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7425|klog 7425]]) at 1 and 10 kHz. See the table below.
 * Most of the RF components are not secured to the chassis to allow for the quick implementation. This may cause undesired acoustic coupling.
Line 16: Line 17:
  || ''' Freq [Hz] ''' || ''' Freq noise [Hz/Hz^1/2] ''' || ''' Phase noise [dBc/Hz] ''' || '''ROS-109-919 spec [dBc/Hz]'''||
  || 0.01 ||
  || 0.1 ||
  || 1 ||
  || 10 ||
  || 100
||
  || 1,000 ||
  || 10,000 ||
  || ''' Frequency [Hz] ''' || ''' Measured Frequency noise [Hz/Hz^1/2] ''' || ''' Equivalent Phase noise [dBc/Hz] ''' || '''ROS-102-919 specification w/o frequency division [dBc/Hz]'''||
  || 0.01 || 5 || 51 || --||
  || 0.1 || 0.4 || 9 || -- ||
  || 1 || 0.1 || -23 || -- ||
  || 10 || 0.05 || -49 || -- ||
  || 100 || 0.05 || -69 || --
||
  || 1,000 || 0.05 || -89 || -98 ||
  || 10,000 || 0.03 || -113 || -123 ||
  || 100,000 || -- || -- || -143 ||
Line 26: Line 28:
 * Linear range of 0.8 to 2.8 V achieved ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=6638|klog 6638]]).
 * Tuning sensitivity of 0.42 MHz/V is achieved.
 . {{attachment:6544_20181013071657_1.png| | width=300}} {{attachment:6544_20181013071708_2.png | | width=300}}

Low Noise VCOs

Descriptions

Low phase noise, a center frequency of 70 MHz, actuation range of several 100 kHz, aaa dBm output


Prototype model


  • Designed by Y. Enomoto (2018), inspired by LIGO low noise VCOs. JGW-D1808968

Noise performance

  • Worse than the specification for the non-divided phase noise (klog 7425) at 1 and 10 kHz. See the table below.

  • Most of the RF components are not secured to the chassis to allow for the quick implementation. This may cause undesired acoustic coupling.
  • Measured freq. noise (klog 7425)

    • Frequency [Hz]

      Measured Frequency noise [Hz/Hz^1/2]

      Equivalent Phase noise [dBc/Hz]

      ROS-102-919 specification w/o frequency division [dBc/Hz]

      0.01

      5

      51

      --

      0.1

      0.4

      9

      --

      1

      0.1

      -23

      --

      10

      0.05

      -49

      --

      100

      0.05

      -69

      --

      1,000

      0.05

      -89

      -98

      10,000

      0.03

      -113

      -123

      100,000

      --

      --

      -143

Tuning Range

  • Linear range of 0.8 to 2.8 V achieved (klog 6638).

  • Tuning sensitivity of 0.42 MHz/V is achieved.
  • 6544_20181013071657_1.png 6544_20181013071708_2.png


Endeavour model


  • Sophisticated version of the prototype model.

Bill of Materials

KAGRA/Subgroups/MIF/AEL/LowNoiseVCOs (last edited 2019-11-12 11:32:54 by KiwamuIzumi)