Differences between revisions 14 and 21 (spanning 7 versions)
⇤ ← Revision 14 as of 2022-10-26 11:13:22 →
Size: 4260
Editor: KeikoKokeyama
Comment:
← Revision 21 as of 2022-11-02 09:12:15 → ⇥
Size: 4685
Editor: KeikoKokeyama
Comment:
Deletions are marked like this. Additions are marked like this.
Line 12: Line 12:
 * Phasing is done by Kenta
Line 19: Line 20:
 * Phasing is done by Kenta
Line 28: Line 29:
 * Phasing is done by Kenta in June
Line 33: Line 35:
 * There is only QPD2 ({{{K1:TMS-X_IR_QPDA2_{PIT,YAW}}}}) on the TMSX in-air path. At a random Gouy phase position.  * There is only QPD2 ({{{K1:TMS-X_IR_QPDA2_{PIT,YAW} }}}) on the TMSX in-air path. At a random Gouy phase position.
Line 43: Line 45:
  * Is the TMSX in-air beam clipped in the TMS in-vac?
   * https://klog.icrr.u-tokyo.ac.jp/osl/?r=22762
Line 47: Line 51:
 * QPD1 is used to the beam position control feeding back to the BS ({{{K1:ASC-DOF1_{P,Y}}}})  * QPD1 is used to the beam position control feeding back to the BS ({{{K1:ASC-DOF1_{P,Y} }}})
Line 55: Line 59:
  * {{{K1:ASC-POP_FORWARD_QPDA1_DC_{PIT,YAW} }}}
  * They can be found on sitemap > ASC overview > All DC QPDs
Line 58: Line 64:
  * {{{K1:LSC-POP_S{P}POL_DC}}}
  * Can anyone add them on an MEDM screen somewhere?
Line 66: Line 74:
 * {{{K1:ASC-DC{5,6,7}_{P,Y}}}} are to be used for the WFS DC centering loops  * {{{K1:ASC-DC{5,6,7}_{P,Y} }}} are to be used for the WFS DC centering loops
Line 69: Line 77:
 * {{{K1:ASC-DC5_{P,Y}}}} are used for the DC centering controls  * {{{K1:ASC-DC5_{P,Y} }}} are used for the DC centering controls
Line 85: Line 93:
 * Output matrix
  * {{{K1:ASC-DSOFT_{P,Y} }}} to IY
  * {{{K1:ASC-DHARD_{P,Y} }}} to EY
Line 87: Line 98:
  * {{{K1:ASC-DSOFT_{P,Y}}}} to IY
  * {{{K1:ASC-DHARD_{P,Y}}}} to EY

Angular Sensing and Control (Oct, 2022)

Contents

  1. Angular Sensing and Control (Oct, 2022)
    1. WFS ports
      1. REFL (17, 45 MHz)
      2. POP (17, 45 MHz)
      3. AS (17, 28 MHz)
    2. DC QPD ports
      1. TMSX
      2. TMSY
      3. POP Forward
    3. DC PDs
    4. WFS Commissioning
      1. WFS DC centering
        1. General
        2. REFL
        3. POP
        4. AS
      2. Single Y arm
      3. Single X arm
      4. PRMI
      5. PRFPMI
      6. DRFPMI
  2. Next Steps
    1. Infrastructure
    2. Simulation
    3. Integration
  3. Known issues

WFS ports

REFL (17, 45 MHz)

POP (17, 45 MHz)

AS (17, 28 MHz)

DC QPD ports

TMSX

TMSY

POP Forward

  • There are two DC QPDs on POP Forward, used for the initial alignment

    • K1:ASC-POP_FORWARD_QPDA1_DC_{PIT,YAW} 

    • They can be found on sitemap > ASC overview > All DC QPDs

DC PDs

  • There are POP_P and POP_S DC PDs on POP.

    • K1:LSC-POP_S{P}POL_DC

    • Can anyone add them on an MEDM screen somewhere?

WFS Commissioning

WFS DC centering

General

  • Beam spots on the quadrant diodes must be centered (DC centering)
  • If the beam is off from the WFSs, use the picomotors first because the PZT ranges are not large

  • K1:ASC-DC{5,6,7}_{P,Y}  are to be used for the WFS DC centering loops

REFL

  • Open the REFL shutter first for REFL WFS

  • K1:ASC-DC5_{P,Y}  are used for the DC centering controls

    • FM filters:
      • Gains: null (gain of 0) and Gain(UGF40)
      • LPF: p1 (pole at 1 Hz)
      • Integrator: p0:z1 (pole at 0 Hz, zero at 1 Hz) - turn this on after the LPF

POP

  • DC control loop not implemented yet

AS

  • DC control loop not implemented yet

Single Y arm

Single X arm

PRMI

PRFPMI

DRFPMI

Next Steps

Infrastructure

  • Guardian implementation
    • DC centering loops on REFL, POP, and AS
    • Single Y, X arms, and PRMI guardstates for initial alignment

  • Add trigger for the main ASC switch (K1:ASC-WFS_GAIN) similarly to the IMC switch (K1:IMC-WFS_GAIN)

Simulation

  • Compare the measured sensing matrices against the simulation
    • Koyama-kun's simulation GUI tool is available on the workstations

      • sitemap > Commissioning Top > finesse GUI

Integration

  • Implement single-Y, single-X, and PRMI controls for the initial alignment
    • If the alignment is too off, first ADS then WFS control?
  • PRFPMI/DRFPMI angular controls
  • Noise budget

Known issues

  • TMSX PIT-YAW coupling
    • The beam is slightly not centered in yaw on the second lens on the in-air table. Adjusting the beam position on the lens might fix the problem.

KAGRA/Subgroups/MIF/AngularSensing (last edited 2022-11-02 09:12:15 by KeikoKokeyama)