Differences between revisions 1 and 15 (spanning 14 versions)
⇤ ← Revision 1 as of 2020-08-11 13:26:29 →
Size: 200
Editor: KeikoKokeyama
Comment:
← Revision 15 as of 2020-08-12 16:07:12 → ⇥
Size: 1487
Editor: KeikoKokeyama
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Simulation meeting 2020 Aug 12 = = Simulation meeting 2020 Aug 12, 15:00- =
Line 9: Line 9:
   * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11857|Note on FPMI]]
    * Why not to use "diff" command (and its history)
    * Updated sensing matrix with "fsig" command
    * jupyter notebook on git was updated to use python3
    * Comparison v.s. analytical calculation
   * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11858|Note on PRFPMI]]
    * Matrices do not match very much :(
    * Analytical calculations seems suspicious
   * Next steps
    * DRFPMI model
    * Include the higher order modes (FPMI, PRFPMI, DRFPMI)
Line 10: Line 21:
 * Birefringence modeling  * Birefringence modeling (Haoyou)
    * Carefully testing a simple PRC configuration with the S-P conversion using a fake BS. In the model using a BS to separate S and P, there is i multiplied for the BS transmission, which does not happen in the real S-P conversion process. It should be properly treated in Finesse.
 * OMC modeling (June Gyu)
    * Building
 * Simulation Interface
   * Had the second lecture by Yuzu-san on Aug 5th
    * Installed Anaconda, Finesse2
    * [[KAGRA/Subgroups/MIF/Simulation/CondaSetup | Installation memo for Finesse (Koyama)]]
Line 12: Line 30:
 * OMC modeling

 * Simulation Interface 		=== Plan during Aug 17-27 ===
 * Hirose-san and Koyama-san will visit Kamioka
 * Yuzu-san will be in Kamioka for instruction from 17(Mon) afternoon to 26(Wed) evening.

Simulation meeting 2020 Aug 12, 15:00-

Participants

Agenda

Updates from Projects

  • IFO modeling

    • Note on FPMI

      • Why not to use "diff" command (and its history)
      • Updated sensing matrix with "fsig" command
      • jupyter notebook on git was updated to use python3
      • Comparison v.s. analytical calculation

    • Note on PRFPMI

      • Matrices do not match very much :(

      • Analytical calculations seems suspicious
    • Next steps
      • DRFPMI model
      • Include the higher order modes (FPMI, PRFPMI, DRFPMI)
  • Birefringence modeling (Haoyou)
    • Carefully testing a simple PRC configuration with the S-P conversion using a fake BS. In the model using a BS to separate S and P, there is i multiplied for the BS transmission, which does not happen in the real S-P conversion process. It should be properly treated in Finesse.
  • OMC modeling (June Gyu)
    • Building
  • Simulation Interface

Plan during Aug 17-27

  • Hirose-san and Koyama-san will visit Kamioka
  • Yuzu-san will be in Kamioka for instruction from 17(Mon) afternoon to 26(Wed) evening.

KAGRA/Subgroups/MIF/Simulation/SimMeeting20200812 (last edited 2020-08-19 13:31:59 by haoyu.wang)