Differences between revisions 12 and 15 (spanning 3 versions)
Revision 12 as of 2020-08-12 12:56:17
Size: 985
Comment:
Revision 15 as of 2020-08-12 16:07:12
Size: 1487
Comment:
Deletions are marked like this. Additions are marked like this.
Line 16: Line 16:
    * Analytical calculations seems suspicious
   * Next steps
    * DRFPMI model
    * Include the higher order modes (FPMI, PRFPMI, DRFPMI)
Line 17: Line 21:
 * Birefringence modeling

 * OMC modeling
 * Birefringence modeling (Haoyou)
    * Carefully testing a simple PRC configuration with the S-P conversion using a fake BS. In the model using a BS to separate S and P, there is i multiplied for the BS transmission, which does not happen in the real S-P conversion process. It should be properly treated in Finesse.
 * OMC modeling (June Gyu)
    * Building
Line 23: Line 27:
   * [[KAGRA/Subgroups/MIF/Simulation/CondaSetup | Installation memo for Finesse (Koyama)]]     * Installed Anaconda, Finesse2
 
* [[KAGRA/Subgroups/MIF/Simulation/CondaSetup | Installation memo for Finesse (Koyama)]]

Simulation meeting 2020 Aug 12, 15:00-

Participants

Agenda

Updates from Projects

  • IFO modeling
    • Note on FPMI

      • Why not to use "diff" command (and its history)
      • Updated sensing matrix with "fsig" command
      • jupyter notebook on git was updated to use python3
      • Comparison v.s. analytical calculation
    • Note on PRFPMI

      • Matrices do not match very much :(

      • Analytical calculations seems suspicious
    • Next steps
      • DRFPMI model
      • Include the higher order modes (FPMI, PRFPMI, DRFPMI)
  • Birefringence modeling (Haoyou)
    • Carefully testing a simple PRC configuration with the S-P conversion using a fake BS. In the model using a BS to separate S and P, there is i multiplied for the BS transmission, which does not happen in the real S-P conversion process. It should be properly treated in Finesse.
  • OMC modeling (June Gyu)
    • Building
  • Simulation Interface

Plan during Aug 17-27

  • Hirose-san and Koyama-san will visit Kamioka
  • Yuzu-san will be in Kamioka for instruction from 17(Mon) afternoon to 26(Wed) evening.

KAGRA/Subgroups/MIF/Simulation/SimMeeting20200812 (last edited 2020-08-19 13:31:59 by haoyu.wang)