|
Size: 215
Comment:
|
Size: 2093
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 6: | Line 6: |
| Kokeyama, Hirose, Wang, Hiro-sensi, Aso, Miyakawa, June Gyu, Eisenmann, Somiya, Michimura |
|
| Line 8: | Line 10: |
| * Finesse interface | * GUI * Lense sensing noise is implemented. Quantum noise is under way. |
| Line 10: | Line 14: |
| * the purpose of this project is to set up and provide FINESSE models for other specific project like the OMC scan. * The implementing of mirror maps has several procedures. Phase tunings of PRC and SRM are still under test after implementing maps. * Only mirror maps of test masses in the arms are implemented. * We don't have mirror maps for recycling mirrors. But we have maps for the BS. We couldn't find a way to implement the BS map, so in current model, the BS map is ignored. * The phase of PRM and SRM is usually set 0 or 90 degrees depending on resonance/anti-resonance and power/signal recycling for the carrier. However, the actual tuning is more complicated for recycling cavities as it also depends on the resonance and frequency of sidebands. Note that the PRC has something to do with the RF sidebands, while the SRC relates to the signal sidebands. |
|
| Line 11: | Line 21: |
| * Some simulations have been done and June Gyu-san will show this on next meeting. |
|
| Line 12: | Line 24: |
| * We have developed the model which can calculate the birefringence angle based on the coupling matrix. * The birefringence angle of ITMX used for KAGRA is calculated. It is compared with the measurement of a discarded ITM (same growth method of installed ITMs). It seems that they have similar structures. But they are different mirrors and it is hard to see the effectiveness of the comparison. We don't have TWE maps for this discarded ITM to calculate its birefringence angle. But an interferometer is being set up which can take TWE map measurements in the future. * At the moment, we have TWE maps for a spare ETM and the birefringence measurement is done. We are going to compare simulations to measurements for this mirror. * |
Simulation meeting 2021 Mar 2 17:00
Zoom2: https://zoom.us/j/6676627462
Participants
Kokeyama, Hirose, Wang, Hiro-sensi, Aso, Miyakawa, June Gyu, Eisenmann, Somiya, Michimura
Agenda
Updates from Projects
- GUI
- Lense sensing noise is implemented. Quantum noise is under way.
- Ifo model
- the purpose of this project is to set up and provide FINESSE models for other specific project like the OMC scan.
- The implementing of mirror maps has several procedures. Phase tunings of PRC and SRM are still under test after implementing maps.
- Only mirror maps of test masses in the arms are implemented.
- We don't have mirror maps for recycling mirrors. But we have maps for the BS. We couldn't find a way to implement the BS map, so in current model, the BS map is ignored.
- The phase of PRM and SRM is usually set 0 or 90 degrees depending on resonance/anti-resonance and power/signal recycling for the carrier. However, the actual tuning is more complicated for recycling cavities as it also depends on the resonance and frequency of sidebands. Note that the PRC has something to do with the RF sidebands, while the SRC relates to the signal sidebands.
- OMC model
- Some simulations have been done and June Gyu-san will show this on next meeting.
- Birefringence
- We have developed the model which can calculate the birefringence angle based on the coupling matrix.
- The birefringence angle of ITMX used for KAGRA is calculated. It is compared with the measurement of a discarded ITM (same growth method of installed ITMs). It seems that they have similar structures. But they are different mirrors and it is hard to see the effectiveness of the comparison. We don't have TWE maps for this discarded ITM to calculate its birefringence angle. But an interferometer is being set up which can take TWE map measurements in the future.
- At the moment, we have TWE maps for a spare ETM and the birefringence measurement is done. We are going to compare simulations to measurements for this mirror.