Differences between revisions 14 and 92 (spanning 78 versions)
Revision 14 as of 2018-07-26 14:14:32
Size: 2132
Comment:
Revision 92 as of 2018-11-20 13:09:07
Size: 8018
Editor: KousekiMiyo
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
== KAGRA PEM Channels == <<TableOfContents(3)>>
= KAGRA PEM Channel List =

== Ondotori ==
 * [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]]

== PSL ==
|| PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) ||
|| accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || [[attachment:PEM_pic_ACC_TEAC_table1.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|Amp]] ||
|| accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || [[attachment:PEM_pic_ACC_TEAC_table2.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|Amp]] ||
|| accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || [[attachment:PEM_pic_ACC_TEAÇ_table3.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|Amp]] ||
|| accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_EXIT || [[attachment:PEM_pic_ACC_KISTLER_exit.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7226|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8193|Amp]]||
|| accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_REFCAV || [[attachment:PEM_pic_ACC_KISTLER_refcav.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7225|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8191|Amp]] ||
|| magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || [[attachment:PEM_pic_MAG_pslrack.pdf|pic]] || T || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distrobutor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]||
|| microphone || (B&K) 4188-A-021 || K1:PEM-PSL_MIC_CENTER || [[attachment:PEM_pic_MIC_center.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]||

== IMC ==
|| PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) ||
|| microphone || (B&K) 4188-A-021 || K1:PEM-IMC_MIC_REFL1 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8974|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]||
|| microphone || (B&K) 4188-A-021 || K1:PEM-IMC_MIC_REFL2 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8976|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]||
Line 4: Line 23:
 * PSL
|| PEM || Sensor || Channel name || Picture || Calibration || Memo(S number) ||
|| accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || pic || 1m/s^2/V || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|TEAC_710]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|TEAC_SA-611]] ||
|| accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || pic || 1m/s^2/V || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|TEAC_710]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|TEAC_SA-611]] ||
|| accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || pic || 1m/s^2/V || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|TEAC_710]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|TEAC_SA-611]] ||
|| magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || pic || ??? || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distrobutor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]||
|| microphone || (B&K) 4188-A-021 || PEM-PSL_MIC_COACH || pic || ??? || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]||
 * [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]]
== Seismometer ==
||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (SENSINF_OUT_DQ) ||<#F0F0FF> Unit ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7552|JGW-S1707552]] || EXV (IX1, ADC0, 24-26) || Trillium 12QA || K1:PEM-IXV_SEIS_(NS/WE/Z)_ || m/s ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7551|JGW-S1707551]] || EXV (EX1, ADC0, 24-26) || Trillium 120QA || K1:PEM-EXV_SEIS_(NS/WE/Z)_ || m/s ||
||--([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]])-- || --(EYV (EY1, ADC0, 24-26) )-- || --(Trillium 120QA)-- || --(K1:PEM-EYV_SEIS_(NS/WE/Z)_)-- || --(m/s)-- ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]] || IXV (IX1, ADC0, 28-30) || Trillium 120QA|| K1:PEM-IXV_SEIS_TEST_(NS/WE/Z)_ || m/s ||
|| [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCe (IOO1, ADC1, 4-6) || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_ || m/s ||
|| [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCi (IOO1, ADC1, 0-2) || Trillium compact 120-SV1|| K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_ || m/s ||
|| [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7528|JGW-S1707528]] || Fukuoka Univ. || Trillium compact 120-SV1|| ??? ||
{*} Selfnoiseのグラフを載せる
Line 13: Line 34:
 * Seismometer {{{
LIGOを意識すれば、こんな感じの名前がわかりやすいかも。
K1:PEM-EXV_GND_X_BLRMS_10_30.rms (1mintrend)
K1:PEM-EXV_GND_X_BLRMS_1_3.rms
K1:PEM-EXV_GND_X_BLRMS_300M_1.rms
K1:PEM-EXV_GND_X_BLRMS_100M_300M.rms
K1:PEM-EXV_GND_X_BLRMS_30M_100M.rms
K1:PEM-EXV_GND_X_DQ (512Hz)
<コメント>
LIGOの場合地面以外にも地震計があるのでGNDという表記がわざわざある。
サスペンション中心に考えれば、'''EXV->ETMX'''にしたほうがスッキリするかも。その場合、サンプリングは1024Hzぐらいあったほうがいいかも。
}}}
== Air Environment Sensors ==
||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (xxx_OUTMON) ||<#F0F0FF> Unit ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||IXV (IX1, ADC1, 24-27) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EXV (EX1, ADC1, 24-27) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EYV (EY1, ADC1, 24-27) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EXA (EX0, ADC1, 16-18) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1:EXA_EX_BARO_TMS_ <<BR>>K1:EXA_EX_TEMP_TMS_<<BR>>K1:EXA_EX_HUMI_TMS_|| Pa<<BR>>Degree<<BR>>% ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EYA (EY0, ADC0, 20-30?) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||IXC (IX0, ADC0, 16-27?) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa ||
||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||IYC (IY0, ADC0, 16-27?) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa ||


/!\ Now All Air monitor channels are assigned as <Place>_SEINSOR{1-4}_INMON.


== Temporary channels in IX0 ==
Line 15: Line 62:
|| X front 2F|| Trillium 12QA || ??? || pic || memo ||
|| X end 2F || Trillium 120QA || ??? || pic || memo ||
|| Y end 2F || Trillium 12-QA || ??? || pic || memo ||
|| IMC MCe || Trillium compact 120-SV1 || ??? || pic || memo ||
|| IMC MCo || Trillium compact 120-SV1 || ??? || pic || memo ||
|| Fukuoka Univ. || Trillium compact 120-SV1 || ??? || pic || memo ||
|| IX0 || Temporary || K1:PEM-IX0_SENSOR(1-12) || pic || Will be removed ||

== Temporary channels in IY0 ==
|| Place || Sensor || Channel name || picture || Memo ||
|| IY0 || Temporary || K1:PEM-IY0_SENSOR(1-12) || pic || Will be removed ||

KAGRA PEM Channel List

Ondotori

PSL

PEM

Sensor

Channel name (_OUT_DQ)

Picture

Calibration(unit)

Memo(S number)

accelerometer

TEAC 710

K1:PEM-PSL_ACC_TABLE1_Z

pic

m/s^2

ACC, Amp

accelerometer

TEAC 710

K1:PEM-PSL_ACC_TABLE2_Z

pic

m/s^2

ACC, Amp

accelerometer

TEAC 710

K1:PEM-PSL_ACC_TABLE3_Z

pic

m/s^2

ACC, Amp

accelerometer

KISTLER 8640A5

K1:PEM-PSL_ACC_PERI_EXIT

pic

m/s^2

ACC, Amp

accelerometer

KISTLER 8640A5

K1:PEM-PSL_ACC_PERI_REFCAV

pic

m/s^2

ACC, Amp

magnetometer

MAG13 MCL100

K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z)

pic

T

MAG13, WF, Distrobutor, Power

microphone

(B&K) 4188-A-021

K1:PEM-PSL_MIC_CENTER

pic

Pa

MIC, amp

IMC

PEM

Sensor

Channel name (_OUT_DQ)

Picture

Calibration(unit)

Memo(S number)

microphone

(B&K) 4188-A-021

K1:PEM-IMC_MIC_REFL1

[[|pic]]

Pa

MIC, amp

microphone

(B&K) 4188-A-021

K1:PEM-IMC_MIC_REFL2

[[|pic]]

Pa

MIC, amp

Seismometer

Snumber

Installed Place (ADC port)

Name

Channel name (SENSINF_OUT_DQ)

Unit

JGW-S1707552

EXV (IX1, ADC0, 24-26)

Trillium 12QA

K1:PEM-IXV_SEIS_(NS/WE/Z)_

m/s

JGW-S1707551

EXV (EX1, ADC0, 24-26)

Trillium 120QA

K1:PEM-EXV_SEIS_(NS/WE/Z)_

m/s

JGW-S1707553

EYV (EY1, ADC0, 24-26)

Trillium 120QA

K1:PEM-EYV_SEIS_(NS/WE/Z)_

m/s

JGW-S1707553

IXV (IX1, ADC0, 28-30)

Trillium 120QA

K1:PEM-IXV_SEIS_TEST_(NS/WE/Z)_

m/s

JGW-S170xxxx

MCe (IOO1, ADC1, 4-6)

Trillium compact 120-SV1

K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_

m/s

JGW-S170xxxx

MCi (IOO1, ADC1, 0-2)

Trillium compact 120-SV1

K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_

m/s

JGW-S1707528

Fukuoka Univ.

Trillium compact 120-SV1

???

{*} Selfnoiseのグラフを載せる

LIGOを意識すれば、こんな感じの名前がわかりやすいかも。
K1:PEM-EXV_GND_X_BLRMS_10_30.rms (1mintrend)
K1:PEM-EXV_GND_X_BLRMS_1_3.rms
K1:PEM-EXV_GND_X_BLRMS_300M_1.rms
K1:PEM-EXV_GND_X_BLRMS_100M_300M.rms
K1:PEM-EXV_GND_X_BLRMS_30M_100M.rms
K1:PEM-EXV_GND_X_DQ (512Hz)
<コメント>
LIGOの場合地面以外にも地震計があるのでGNDという表記がわざわざある。
サスペンション中心に考えれば、'''EXV->ETMX'''にしたほうがスッキリするかも。その場合、サンプリングは1024Hzぐらいあったほうがいいかも。

Air Environment Sensors

Snumber

Installed Place (ADC port)

Name

Channel name (xxx_OUTMON)

Unit

JGW-S170xxxx

IXV (IX1, ADC1, 24-27)

AirEnvironmentSensors

K1-aaa_bbb_TEMPERATURE_
K1-aaa_bbb_HUMIDITY_
K1-aaa_bbb_AIRPRESSURE_

Degree
%
Pa

JGW-S170xxxx

EXV (EX1, ADC1, 24-27)

AirEnvironmentSensors

K1-aaa_bbb_TEMPERATURE_
K1-aaa_bbb_HUMIDITY_
K1-aaa_bbb_AIRPRESSURE_

Degree
%
Pa

JGW-S170xxxx

EYV (EY1, ADC1, 24-27)

AirEnvironmentSensors

K1-aaa_bbb_TEMPERATURE_
K1-aaa_bbb_HUMIDITY_
K1-aaa_bbb_AIRPRESSURE_

Degree
%
Pa

JGW-S170xxxx

EXA (EX0, ADC1, 16-18)

AirEnvironmentSensors

K1:EXA_EX_BARO_TMS_
K1:EXA_EX_TEMP_TMS_
K1:EXA_EX_HUMI_TMS_

Pa
Degree
%

JGW-S170xxxx

EYA (EY0, ADC0, 20-30?)

AirEnvironmentSensors

K1-aaa_bbb_TEMPERATURE_
K1-aaa_bbb_HUMIDITY_
K1-aaa_bbb_AIRPRESSURE_

Degree
%
Pa

JGW-S170xxxx

IXC (IX0, ADC0, 16-27?)

AirEnvironmentSensors

K1-aaa_bbb_TEMPERATURE_
K1-aaa_bbb_HUMIDITY_
K1-aaa_bbb_AIRPRESSURE_

Degree
%
Pa

JGW-S170xxxx

IYC (IY0, ADC0, 16-27?)

AirEnvironmentSensors

K1-aaa_bbb_TEMPERATURE_
K1-aaa_bbb_HUMIDITY_
K1-aaa_bbb_AIRPRESSURE_

Degree
%
Pa

/!\ Now All Air monitor channels are assigned as <Place>_SEINSOR{1-4}_INMON.

Temporary channels in IX0

Place

Sensor

Channel name

picture

Memo

IX0

Temporary

K1:PEM-IX0_SENSOR(1-12)

pic

Will be removed

Temporary channels in IY0

Place

Sensor

Channel name

picture

Memo

IY0

Temporary

K1:PEM-IY0_SENSOR(1-12)

pic

Will be removed

KAGRA/Subgroups/PEM/Channels (last edited 2019-05-11 12:31:04 by KousekiMiyo)