Size: 2687
Comment:
|
Size: 8337
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
== KAGRA PEM Channels == | <<TableOfContents(3)>> = KAGRA PEM Channel List = == Ondotori == * [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] == PSL == || PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || [[attachment:PEM_pic_ACC_TEAC_table1.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || [[attachment:PEM_pic_ACC_TEAC_table2.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || [[attachment:PEM_pic_ACC_TEAÇ_table3.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|Amp]] || || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_EXIT || [[attachment:PEM_pic_ACC_KISTLER_exit.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7226|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8193|Amp]]|| || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_REFCAV || [[attachment:PEM_pic_ACC_KISTLER_refcav.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7225|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8191|Amp]] || || magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || [[attachment:PEM_pic_MAG_pslrack.pdf|pic]] || T || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distrobutor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-PSL_MIC_CENTER || [[attachment:PEM_pic_MIC_center.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]|| == IMC == || PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) || || microphone || (B&K) 4188-A-021 || K1:PEM-IMC_MIC_REFL1 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8974|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-IMC_MIC_REFL2 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8976|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]|| |
Line 4: | Line 23: |
* PSL || PEM || Sensor || Channel name || Picture || Calibration(unit) || Memo(S number) || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|TEAC_710]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|TEAC_SA-611]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|TEAC_710]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|TEAC_SA-611]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|TEAC_710]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|TEAC_SA-611]] || || accelerometer || KISTLER 8640A5 || PEM-PSL_ACC_PERI_OUT || pic || ??? || || || accelerometer || KISTLER 8640A5 || PEM-PSL_ACC_PERI_REFCAV || pic || ??? || || * [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] || magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || pic || ??? || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distrobutor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]|| || microphone || (B&K) 4188-A-021 || PEM-PSL_MIC_CENTER || pic || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]|| |
== Seismometer == ||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (SENSINF_OUT_DQ) ||<#F0F0FF> Unit || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7552|JGW-S1707552]] || EXV (IX1, ADC0, 24-26) || Trillium 12QA || K1:PEM-IXV_SEIS_(NS/WE/Z)_ || m/s || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7551|JGW-S1707551]] || EXV (EX1, ADC0, 24-26) || Trillium 120QA || K1:PEM-EXV_SEIS_(NS/WE/Z)_ || m/s || ||--([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]])-- || --(EYV (EY1, ADC0, 24-26) )-- || --(Trillium 120QA)-- || --(K1:PEM-EYV_SEIS_(NS/WE/Z)_)-- || --(m/s)-- || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]] || IXV (IX1, ADC0, 28-30) || Trillium 120QA|| K1:PEM-IXV_SEIS_TEST_(NS/WE/Z)_ || m/s || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCe (IOO1, ADC1, 4-6) || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_ || m/s || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCi (IOO1, ADC1, 0-2) || Trillium compact 120-SV1|| K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_ || m/s || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7528|JGW-S1707528]] || Fukuoka Univ. || Trillium compact 120-SV1|| ??? || {*} Selfnoiseのグラフを載せる {{{ チャンネル変更案 K1:PEM-EXV_GND_TR120Q_X_BLRMS_10_30.rms (1mintrend) K1:PEM-EXV_GND_TR120Q_X_BLRMS_1_3.rms K1:PEM-EXV_GND_TR120Q_X_BLRMS_300M_1.rms K1:PEM-EXV_GND_TR120Q_X_BLRMS_100M_300M.rms K1:PEM-EXV_GND_TR120Q_X_BLRMS_30M_100M.rms K1:PEM-EXV_GND_TR120Q_X_DQ (512Hz) <コメント> * NS,WEはやめたほうがいい。わかりにくいので、X、Yにする。 * SEISで一緒くたにすると、キャリブレーションのフィルターが違うとき分かりにくいので、どの地震計をつかっているか明記する。 * LIGOの場合、地面以外にも地震計があるのでGNDという表記がわざわざある。 * じゃあPEMで地面以外に地震計を置くかと言ったら、置かない気がする。なのでGNDはいらない気もする。 * けれども、「EXVのどこ」を測っているか一目瞭然なのでこれが良い気がする。 }}} == Air Environment Sensors == ||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (xxx_OUTMON) ||<#F0F0FF> Unit || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||IXV (IX1, ADC1, 24-27) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EXV (EX1, ADC1, 24-27) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EYV (EY1, ADC1, 24-27) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EXA (EX0, ADC1, 16-18) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1:EXA_EX_BARO_TMS_ <<BR>>K1:EXA_EX_TEMP_TMS_<<BR>>K1:EXA_EX_HUMI_TMS_|| Pa<<BR>>Degree<<BR>>% || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EYA (EY0, ADC0, 20-30?) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||IXC (IX0, ADC0, 16-27?) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||IYC (IY0, ADC0, 16-27?) ||[[KAGRA/Subgroups/GIF/EM/AirEnvironmentSensors|AirEnvironmentSensors]]|| K1-aaa_bbb_TEMPERATURE_ <<BR>>K1-aaa_bbb_HUMIDITY_<<BR>>K1-aaa_bbb_AIRPRESSURE_|| Degree<<BR>>%<<BR>>Pa || |
Line 16: | Line 60: |
* [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] | /!\ Now All Air monitor channels are assigned as <Place>_SEINSOR{1-4}_INMON. |
Line 18: | Line 62: |
* Seismometer || Place || Sensor || Channel name || picture || Memo || || X front 2F|| Trillium 12QA || ??? || pic || memo || || X end 2F || Trillium 120QA || ??? || pic || memo || || Y end 2F || Trillium 12-QA || ??? || pic || memo || || IMC MCe || Trillium compact 120-SV1 || ??? || pic || memo || || IMC MCo || Trillium compact 120-SV1 || ??? || pic || memo || || Fukuoka Univ. || Trillium compact 120-SV1 || ??? || pic || memo || |
|
Line 27: | Line 63: |
* Temporary channels in IX0 | == Temporary channels in IX0 == |
Line 31: | Line 67: |
* Temporary channels in IY0 | == Temporary channels in IY0 == |
Contents
KAGRA PEM Channel List
Ondotori
PSL
PEM |
Sensor |
Channel name (_OUT_DQ) |
Picture |
Calibration(unit) |
Memo(S number) |
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE1_Z |
m/s^2 |
||
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE2_Z |
m/s^2 |
||
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE3_Z |
m/s^2 |
||
accelerometer |
KISTLER 8640A5 |
K1:PEM-PSL_ACC_PERI_EXIT |
m/s^2 |
||
accelerometer |
KISTLER 8640A5 |
K1:PEM-PSL_ACC_PERI_REFCAV |
m/s^2 |
||
magnetometer |
MAG13 MCL100 |
K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) |
T |
MAG13, WF, Distrobutor, Power |
|
microphone |
(B&K) 4188-A-021 |
K1:PEM-PSL_MIC_CENTER |
Pa |
IMC
PEM |
Sensor |
Channel name (_OUT_DQ) |
Picture |
Calibration(unit) |
Memo(S number) |
microphone |
(B&K) 4188-A-021 |
K1:PEM-IMC_MIC_REFL1 |
[[|pic]] |
Pa |
|
microphone |
(B&K) 4188-A-021 |
K1:PEM-IMC_MIC_REFL2 |
[[|pic]] |
Pa |
Seismometer
Snumber |
Installed Place (ADC port) |
Name |
Channel name (SENSINF_OUT_DQ) |
Unit |
EXV (IX1, ADC0, 24-26) |
Trillium 12QA |
K1:PEM-IXV_SEIS_(NS/WE/Z)_ |
m/s |
|
EXV (EX1, ADC0, 24-26) |
Trillium 120QA |
K1:PEM-EXV_SEIS_(NS/WE/Z)_ |
m/s |
|
EYV (EY1, ADC0, 24-26) |
Trillium 120QA |
K1:PEM-EYV_SEIS_(NS/WE/Z)_ |
m/s |
|
IXV (IX1, ADC0, 28-30) |
Trillium 120QA |
K1:PEM-IXV_SEIS_TEST_(NS/WE/Z)_ |
m/s |
|
MCe (IOO1, ADC1, 4-6) |
Trillium compact 120-SV1 |
K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_ |
m/s |
|
MCi (IOO1, ADC1, 0-2) |
Trillium compact 120-SV1 |
K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_ |
m/s |
|
Fukuoka Univ. |
Trillium compact 120-SV1 |
??? |
Selfnoiseのグラフを載せる
チャンネル変更案 K1:PEM-EXV_GND_TR120Q_X_BLRMS_10_30.rms (1mintrend) K1:PEM-EXV_GND_TR120Q_X_BLRMS_1_3.rms K1:PEM-EXV_GND_TR120Q_X_BLRMS_300M_1.rms K1:PEM-EXV_GND_TR120Q_X_BLRMS_100M_300M.rms K1:PEM-EXV_GND_TR120Q_X_BLRMS_30M_100M.rms K1:PEM-EXV_GND_TR120Q_X_DQ (512Hz) <コメント> * NS,WEはやめたほうがいい。わかりにくいので、X、Yにする。 * SEISで一緒くたにすると、キャリブレーションのフィルターが違うとき分かりにくいので、どの地震計をつかっているか明記する。 * LIGOの場合、地面以外にも地震計があるのでGNDという表記がわざわざある。 * じゃあPEMで地面以外に地震計を置くかと言ったら、置かない気がする。なのでGNDはいらない気もする。 * けれども、「EXVのどこ」を測っているか一目瞭然なのでこれが良い気がする。
Air Environment Sensors
Snumber |
Installed Place (ADC port) |
Name |
Channel name (xxx_OUTMON) |
Unit |
IXV (IX1, ADC1, 24-27) |
K1-aaa_bbb_TEMPERATURE_ |
Degree |
||
EXV (EX1, ADC1, 24-27) |
K1-aaa_bbb_TEMPERATURE_ |
Degree |
||
EYV (EY1, ADC1, 24-27) |
K1-aaa_bbb_TEMPERATURE_ |
Degree |
||
EXA (EX0, ADC1, 16-18) |
K1:EXA_EX_BARO_TMS_ |
Pa |
||
EYA (EY0, ADC0, 20-30?) |
K1-aaa_bbb_TEMPERATURE_ |
Degree |
||
IXC (IX0, ADC0, 16-27?) |
K1-aaa_bbb_TEMPERATURE_ |
Degree |
||
IYC (IY0, ADC0, 16-27?) |
K1-aaa_bbb_TEMPERATURE_ |
Degree |
Now All Air monitor channels are assigned as <Place>_SEINSOR{1-4}_INMON.
Temporary channels in IX0
Place |
Sensor |
Channel name |
picture |
Memo |
IX0 |
Temporary |
K1:PEM-IX0_SENSOR(1-12) |
pic |
Will be removed |
Temporary channels in IY0
Place |
Sensor |
Channel name |
picture |
Memo |
IY0 |
Temporary |
K1:PEM-IY0_SENSOR(1-12) |
pic |
Will be removed |