3153
Comment:
|
7758
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
== KAGRA PEM Channels == | <<TableOfContents(3)>> = KAGRA PEM Channel List = == Ondotori == * [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] == PSL == || PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || [[attachment:PEM_pic_ACC_TEAC_table1.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || [[attachment:PEM_pic_ACC_TEAC_table2.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || [[attachment:PEM_pic_ACC_TEAÇ_table3.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|Amp]] || || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_EXIT || [[attachment:PEM_pic_ACC_KISTLER_exit.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7226|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8193|Amp]]|| || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_REFCAV || [[attachment:PEM_pic_ACC_KISTLER_refcav.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7225|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8191|Amp]] || || magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || [[attachment:PEM_pic_MAG_pslrack.pdf|pic]] || T || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distributor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-PSL_MIC_CENTER || [[attachment:PEM_pic_MIC_center.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]|| == IMC == || PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) || || microphone || (B&K) 4188-A-021 || K1:PEM-IMC_MIC_REFL1 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8974|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-IMC_MIC_REFL2 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8976|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]|| |
Line 4: | Line 23: |
* PSL || PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|Amp]] || || accelerometer || KISTLER 8640A5 || PEM-PSL_ACC_PERI_EXIT || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7226|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8193|Amp]]|| || accelerometer || KISTLER 8640A5 || PEM-PSL_ACC_PERI_REFCAV || pic || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7225|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8191|Amp]] || || magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || pic || T || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distrobutor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]|| || microphone || (B&K) 4188-A-021 || PEM-PSL_MIC_CENTER || pic || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]|| |
== Seismometer == ||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (OUT_DQ) ||<#F0F0FF> Unit ||<#F0F0FF> fs [Hz] ||<#F0F0FF> klog || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7552|JGW-S1707552]] || EXV (IX1, ADC0, 24-26) || Trillium 12QA || K1:PEM-IXV_GND_TR120Q_(X/Y/Z)_OUT_DQ || um/s || 512|| || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7551|JGW-S1707551]] || EXV (EX1, ADC0, 24-26) || Trillium 120QA || K1:PEM-EXV_GND_TR120Q_(X/Y/Z)_OUT_DQ || um/s || 512 || || ||--([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]])-- || --(EYV (EY1, ADC0, 24-26) )-- || --(Trillium 120QA)-- || --(K1:PEM-EYV_GND_TR120Q_(X/Y/Z)_OUT_DQ)-- || --(um/s)-- || 512 || || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]] || IXV (IX1, ADC0, 28-30) || Trillium 120QA|| K1:PEM-IXV_GND_TR120QTEST_(X/Y/Z)_OUT_DQ || um/s || 512 || || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCe (IOO1, ADC1, 4-6) || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_OUT_DQ || cnt || 512 || || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCi (IOO1, ADC1, 0-2) || Trillium compact 120-SV1|| K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_OUT_DQ || cnt || 512 || || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7528|JGW-S1707528]] || Fukuoka Univ. || Trillium compact 120-SV1|| ??? || --- || 512|| || {*} Selfnoiseのグラフを載せる |
Line 14: | Line 34: |
== Air Environment Sensors == ||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (xxx_OUT_DQ) ||<#F0F0FF> Unit ||<#F0F0FF> Sample rate [Hz] || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9339|JGW-S1709339]] ||IXV (IX1, ADC1, 24-27) || No.5|| K1-IXV_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170XXX]] ||IYV (IY1, ADC1, 24-27) || || || || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EXV (EX1, ADC1, 24-27) || ---|| K1-EXV_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EYV (EY1, ADC1, 24-27) ||---|| K1-EYV_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || IXC (IX0, ADC0, 16-27?) || || || || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9340|JGW-S1709340]] || IYC (IY0, ADC0, 20-23) || No6 || K1-IYC_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || Acording to [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9269|JGW-T1809269]], calibration factor from output voltage to each unit is given with {{{ temp = ( Vout/78/0.001-100)/0.388 [deg_c] humd = Vout/10*100 [%] pressure = Vout/10*300 + 800 [hPa] }}} Then, "_GAIN" and "_OFFSET" parameters in cds filter of each channels are calculated by above equation with count value not voltage, ||<#F0F0FF> Name ||<#F0F0FF> Value ||<#F0F0FF> Unit || || _TEMP_OFFSET || -1.278e4|| count || || _HUMD_OFFSET || 0.0|| count || || _PRES_OFFSET || 4.369e4 || count || || _TEMP_GAIN || 2.017e-2|| deg_c/count|| || _HUMD_GAIN || 6.104e-3|| %/count || || _PRES_GAIN || 1.831e-2 || hPa/count || ,where ransformation coefficient from voltage to adc count is given with c2V = 2.0 * 10/2**15 [V/count], because output signal from sensor is measured with single-end not differential. These parameters are '''managed by SDF with observe.snap. So, plase do not change this file. |
|
Line 15: | Line 59: |
* [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] * Seismometer || Place || Sensor || Channel name || picture || calibration(unit) || Memo || || X front 2F|| Trillium 12QA || K1:PEM-IXV_SEIS_(NS/WE/Z) || pic || m/s^2(?) || memo || || X end 2F || Trillium 120QA || K1:PEM-EXV_SEIS_(NS/WE/Z) || pic || m/s^2(?) || memo || || Y end 2F || Trillium 120QA || K1:PEM-EYV_SEIS_(NS/WE/Z) || pic || m/s^2(?) || memo || || IMC MCe || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCE_(NS/WE/Z) || pic || m/s^2(?) || memo || || IMC MCi || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCI_(NS/WE/Z) || pic || m/s^2(?) || memo || || Fukuoka Univ. || Trillium compact 120-SV1 || ??? || pic || memo || * Temporary channels in IX0 |
== Temporary channels in IX0 == |
Line 30: | Line 63: |
* Temporary channels in IY0 | == Temporary channels in IY0 == |
Line 33: | Line 66: |
== SDF == ||<#F0F0FF> Model ||<#F0F0FF> snapfile ||<#F0F0FF> managed date || klog || || k1pemiy0 || observe.snap || Dec 03 09:49:41 2018 || || || k1pemix1 || observe.snap || Nov 28 19:27:27 2018 || || || k1pemex1 || observe.snap || Nov 28 19:25:46 2018 || || || k1pemey1 || observe.snap || Nov 30 17:15:59 2018 || || |
Contents
KAGRA PEM Channel List
Ondotori
PSL
PEM |
Sensor |
Channel name (_OUT_DQ) |
Picture |
Calibration(unit) |
Memo(S number) |
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE1_Z |
m/s^2 |
||
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE2_Z |
m/s^2 |
||
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE3_Z |
m/s^2 |
||
accelerometer |
KISTLER 8640A5 |
K1:PEM-PSL_ACC_PERI_EXIT |
m/s^2 |
||
accelerometer |
KISTLER 8640A5 |
K1:PEM-PSL_ACC_PERI_REFCAV |
m/s^2 |
||
magnetometer |
MAG13 MCL100 |
K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) |
T |
MAG13, WF, Distributor, Power |
|
microphone |
(B&K) 4188-A-021 |
K1:PEM-PSL_MIC_CENTER |
Pa |
IMC
PEM |
Sensor |
Channel name (_OUT_DQ) |
Picture |
Calibration(unit) |
Memo(S number) |
microphone |
(B&K) 4188-A-021 |
K1:PEM-IMC_MIC_REFL1 |
[[|pic]] |
Pa |
|
microphone |
(B&K) 4188-A-021 |
K1:PEM-IMC_MIC_REFL2 |
[[|pic]] |
Pa |
Seismometer
Snumber |
Installed Place (ADC port) |
Name |
Channel name (OUT_DQ) |
Unit |
fs [Hz] |
klog |
EXV (IX1, ADC0, 24-26) |
Trillium 12QA |
K1:PEM-IXV_GND_TR120Q_(X/Y/Z)_OUT_DQ |
um/s |
512 |
|
|
EXV (EX1, ADC0, 24-26) |
Trillium 120QA |
K1:PEM-EXV_GND_TR120Q_(X/Y/Z)_OUT_DQ |
um/s |
512 |
|
|
EYV (EY1, ADC0, 24-26) |
Trillium 120QA |
K1:PEM-EYV_GND_TR120Q_(X/Y/Z)_OUT_DQ |
um/s |
512 |
|
|
IXV (IX1, ADC0, 28-30) |
Trillium 120QA |
K1:PEM-IXV_GND_TR120QTEST_(X/Y/Z)_OUT_DQ |
um/s |
512 |
|
|
MCe (IOO1, ADC1, 4-6) |
Trillium compact 120-SV1 |
K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_OUT_DQ |
cnt |
512 |
|
|
MCi (IOO1, ADC1, 0-2) |
Trillium compact 120-SV1 |
K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_OUT_DQ |
cnt |
512 |
|
|
Fukuoka Univ. |
Trillium compact 120-SV1 |
??? |
--- |
512 |
|
Selfnoiseのグラフを載せる
Air Environment Sensors
Snumber |
Installed Place (ADC port) |
Name |
Channel name (xxx_OUT_DQ) |
Unit |
Sample rate [Hz] |
IXV (IX1, ADC1, 24-27) |
No.5 |
K1-IXV_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
|
IYV (IY1, ADC1, 24-27) |
|
|
|
128 |
|
EXV (EX1, ADC1, 24-27) |
--- |
K1-EXV_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
|
EYV (EY1, ADC1, 24-27) |
--- |
K1-EYV_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
|
IXC (IX0, ADC0, 16-27?) |
|
|
|
128 |
|
IYC (IY0, ADC0, 20-23) |
No6 |
K1-IYC_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
Acording to JGW-T1809269, calibration factor from output voltage to each unit is given with
temp = ( Vout/78/0.001-100)/0.388 [deg_c] humd = Vout/10*100 [%] pressure = Vout/10*300 + 800 [hPa]
Then, "_GAIN" and "_OFFSET" parameters in cds filter of each channels are calculated by above equation with count value not voltage,
Name |
Value |
Unit |
_TEMP_OFFSET |
-1.278e4 |
count |
_HUMD_OFFSET |
0.0 |
count |
_PRES_OFFSET |
4.369e4 |
count |
_TEMP_GAIN |
2.017e-2 |
deg_c/count |
_HUMD_GAIN |
6.104e-3 |
%/count |
_PRES_GAIN |
1.831e-2 |
hPa/count |
,where ransformation coefficient from voltage to adc count is given with c2V = 2.0 * 10/2**15 [V/count], because output signal from sensor is measured with single-end not differential. These parameters are managed by SDF with observe.snap. So, plase do not change this file.
Place Sensor Channel name picture Memo IX0 Temporary K1:PEM-IX0_SENSOR(1-12) pic Will be removed
Place Sensor Channel name picture Memo IY0 Temporary K1:PEM-IY0_SENSOR(1-12) pic Will be removed
Model snapfile managed date klog k1pemiy0 observe.snap Dec 03 09:49:41 2018 k1pemix1 observe.snap Nov 28 19:27:27 2018 k1pemex1 observe.snap Nov 28 19:25:46 2018 k1pemey1 observe.snap Nov 30 17:15:59 2018 Temporary channels in IX0
Temporary channels in IY0
SDF