3432
Comment:
|
15951
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
== KAGRA PEM Channels == | <<TableOfContents(3)>> = KAGRA PEM Channel List = |
Line 4: | Line 5: |
* PSL || PEM || Sensor || Channel name (_OUT_DQ) || Picture || Calibration(unit) || Memo(S number) || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || [[attachment:PEM_pic_ACC_TEAC_table1.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || [[attachment:PEM_pic_ACC_TEAC_table2.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || [[attachment:PEM_pic_ACC_TEAÇ_table3.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|Amp]] || || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_EXIT || [[attachment:PEM_pic_ACC_KISTLER_exit.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7226|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8193|Amp]]|| || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_REFCAV || [[attachment:PEM_pic_ACC_KISTLER_refcav.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7225|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8191|Amp]] || || magnetometer || MAG13 MCL100 || K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) || pic || T || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distrobutor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-PSL_MIC_CENTER || pic || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]|| |
== Ondotori == * [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] == PSL(-2018/12/10-) == || PEM || Sensor || Channel name (_OUT_DQ) || sampling rate[Hz] ||Picture || Calibration(unit) || Memo(S number) || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE1_Z || 2048 || [[attachment:PEM_pic_ACC_TEAC_table1.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8520|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8523|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE2_Z || 2048 || [[attachment:PEM_pic_ACC_TEAC_table2.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8521|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8524|Amp]] || || accelerometer || TEAC 710 || K1:PEM-PSL_ACC_TABLE3_Z || 2048 || [[attachment:PEM_pic_ACC_TEAÇ_table3.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8522|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8525|Amp]] || || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_EXIT || 2048 || [[attachment:PEM_pic_ACC_KISTLER_exit.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7226|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8193|Amp]]|| || accelerometer || KISTLER 8640A5 || K1:PEM-PSL_ACC_PERI_REFCAV || 2048 || [[attachment:PEM_pic_ACC_KISTLER_refcav.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7225|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8191|Amp]] || || --( magnetometer)-- || MAG13 MCL100 || --( K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) )-- || --( 2048 )-- || [[attachment:PEM_pic_MAG_pslrack.pdf|pic]] || T || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|MAG13]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8181|WF]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8519|Distributor]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8518|Power]] removed temporary|| || microphone || (B&K) 4188-A-021 || K1:PEM-PSL_MIC_CENTER || 2048 || [[attachment:PEM_pic_MIC_center.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8142|amp]]|| || accelerometer || KISTLER || K1:PEM-PSL_ACC_SIGNAL1 || 2048 || [[attachment:PEM_pic_ACC_SIGNAL12.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7223|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8189|Amp]], portable accelerometer || || accelerometer || KISTLER || K1:PEM-PSL_ACC_SIGNAL2 || 2048 || [[attachment:PEM_pic_ACC_SIGNAL12.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7224|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8195|Amp]], portable accelerometer|| == CS(-2018/12/10-) == || PEM || Sensor || Channel name (_OUT_DQ) || sampling rate[Hz || Picture || Calibration(unit) || Memo(S number) || || microphone || AT-VD6 No.1 || K1:PEM-IMC_MIC_REFL||2048 || [[attachment:PEM_pic_MIC_IMC_refl.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7647|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9068|amp]]|| || accelerometer || TEAC706 || K1:PEM-IMC_ACC_REFL_TABLE || 2048 || [[attachment:PEM_pic_ACC_IMC_refl.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9062|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7649|amp]]|| || microphone || AT-VD6 No.2 || K1:PEM-IMC_MIC_TRANS|| 2048 || [[|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7648|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7650|amp]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-IFI_MIC_REFL || 2048 || [[attachment:PEM_pic_ACC_MIC_IFI.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8974|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]|| || accelerometer || TEAC710 || K1:PEM-IFI_ACC_REFL_TABLE || 2048 || [[attachment:PEM_pic_ACC_MIC_IFI.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9328|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9332|amp]]|| || microphone || (B&K) 4188-A-021 || K1:PEM-POP_MIC || 2048 || [[attachment:PEM_pic_ACC_MIC_POP.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8976|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8975|amp]]|| || accelerometer || TEAC710 || K1:PEM-POP_ACC_TABLE || 2048 || [[attachment:PEM_pic_ACC_MIC_POP.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9326|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9330|amp]]|| || microphone || ACO 7146NL/4152 || K1:PEM-POS_MIC || 2048 || [[attachment:PEM_pic_MIC_POS.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9036|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9317|amp]]|| || accelerometer || TEAC710 || K1:PEM-POS_ACC_TABLE || 2048 || [[attachment:PEM_pic_ACC_POS.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9325|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9329|amp]]|| || microphone || ACO 7146/4152 || K1:PEM-OMC_MIC || 2048 || [[attachment:PEM_pic_MIC_OMC.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9035|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9317|amp]]|| || accelerometer || TEAC710 || K1:PEM-OMC_ACC_TABLE || 2048 || [[attachment:PEM_pic_ACC_TEAC_OMC.pdf|pic]] || m/s^2 || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9327|ACC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9331|amp]]|| || microphone || ACO 7146/4152 || K1:PEM-BS_MIC || 2048 || [[attachment:PEM_pic_MIC_BS.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9034|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9317|amp]]|| || microphone || ACO 7146/4152 || K1:PEM-SR_MIC || 2048 || [[attachment:PEM_pic_MIC_SR.pdf|pic]] || Pa || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9038|MIC]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9317|amp]]|| == EX(-201X/XX/XX) == * PCal Tx table (TEAC710) * PCal Rx table (TEAC710) * EXA area (ACO mic) * EXC/EXV area (ACO mic) * EXV talbe (TEAC706) * EXC area (magnetometer) == EY(-201X/XX/XX) == * PCal Tx table (TEAC710) * PCal Rx table (TEAC710) * EYA area (ACO mic) * EYC/EYV area (ACO mic) * EYV talbe (TEAC706) * EYC area (magnetometer) |
Line 15: | Line 53: |
* [[KAGRA/Subgroups/DGS/Projects/Rem|Ondotori System]] | == Seismometer == ||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (OUT_DQ) ||<#F0F0FF> Unit ||<#F0F0FF> fs [Hz] ||<#F0F0FF> klog || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7552|JGW-S1707552]] || EXV (IX1, ADC0, 24-26) || Trillium 12QA || K1:PEM-IXV_GND_TR120Q_(X/Y/Z)_OUT_DQ || um/s || 512|| [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7186|7186]] || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7551|JGW-S1707551]] || EXV (EX1, ADC0, 24-26) || Trillium 120QA || K1:PEM-EXV_GND_TR120Q_(X/Y/Z)_OUT_DQ || um/s || 512 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7186|7186]] || ||--([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]])-- || --(EYV (EY1, ADC0, 24-26) )-- || --(Trillium 120QA)-- || --(K1:PEM-EYV_GND_TR120Q_(X/Y/Z)_OUT_DQ)-- || --(um/s)-- || 512 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7186|7186]] || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7553|JGW-S1707553]] || IXV (IX1, ADC0, 28-30) || Trillium 120QA|| K1:PEM-IXV_GND_TR120QTEST_(X/Y/Z)_OUT_DQ || um/s || 512 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7186|7186]] || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCe (IOO1, ADC1, 4-6) || Trillium compact 120-SV1 || K1:PEM-IMC_GND_TR120C_MCE_(X/Y/Z)_OUT_DQ || um/s || 512 || || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || MCi (IOO1, ADC1, 0-2) || Trillium compact 120-SV1|| K1:PEM-IMC_GND_TR120C_MCI_(X/Y/Z)_OUT_DQ || um/s || 512 || || || [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7528|JGW-S1707528]] || Fukuoka Univ. || Trillium compact 120-SV1|| ??? || --- || 512|| || {*} Selfnoiseのグラフを載せる |
Line 17: | Line 64: |
* Seismometer || Place || Sensor || Channel name (_OUT_DQ) || picture || calibration(unit) || Memo || || X front 2F|| Trillium 12QA || K1:PEM-IXV_SEIS_(NS/WE/Z)_SENSINF || pic || m/s^2(?) || memo || || X end 2F || Trillium 120QA || K1:PEM-EXV_SEIS_(NS/WE/Z)_SENSINF || pic || m/s^2(?) || memo || || Y end 2F || Trillium 120QA || K1:PEM-EYV_SEIS_(NS/WE/Z)_SENSINF || pic || m/s^2(?) || memo || || IMC MCe || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCE_(NS/WE/Z)_SENSINF || pic || m/s^2(?) || memo || || IMC MCi || Trillium compact 120-SV1 || K1:PEM-IMC_SEIS_MCI_(NS/WE/Z)_SENSINF || pic || m/s^2(?) || memo || || Fukuoka Univ. || Trillium compact 120-SV1 || ??? || pic || memo || |
== Air Environment Sensors == ||<#F0F0FF> Snumber ||<#F0F0FF>Installed Place (ADC port) ||<#F0F0FF> Name ||<#F0F0FF> Channel name (xxx_OUT_DQ) ||<#F0F0FF> Unit ||<#F0F0FF> Sample rate [Hz] || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9339|JGW-S1709339]] ||IXV (IX1, ADC1, 24-27) || No.5|| K1-IXV_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170XXX]] ||IYV (IY1, ADC1, 24-27) || || || || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EXV (EX1, ADC1, 24-27) || ---|| K1-EXV_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] ||EYV (EY1, ADC1, 24-27) ||---|| K1-EYV_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxxx|JGW-S170xxxx]] || IXC (IX0, ADC0, 16-27?) || || || || 128 || ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9340|JGW-S1709340]] || IYC (IY0, ADC0, 20-23) || No6 || K1-IYC_WEATHER_{TEMP,HUMD,PRES}_|| Degree, %, Pa || 128 || Acording to [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9269|JGW-T1809269]], calibration factor from output voltage to each unit is given with {{{ temp = ( Vout/78/0.001-100)/0.388 [deg_c] humd = (Vout/2)/5*100 [%] pressure = (Vout/2)/5*300 + 800 [hPa] }}} Then, "_GAIN" and "_OFFSET" parameters in cds filter of each channels are calculated by above equation with count value not voltage, ||<#F0F0FF> Name ||<#F0F0FF> Value ||<#F0F0FF> Unit || || _TEMP_OFFSET || -1.278e4|| count || || _HUMD_OFFSET || 0.0|| count || || _PRES_OFFSET || 4.369e4 || count || || _TEMP_GAIN || 2.017e-2|| deg_c/count|| || _HUMD_GAIN || 6.104e-3|| %/count || || _PRES_GAIN || 1.831e-2 || hPa/count || ,where ransformation coefficient from voltage to adc count is given with c2V = 2.0 * 10/2**15 [V/count], because output signal from sensor is measured with single-end not differential. These parameters are '''managed by SDF with observe.snap. So, plase do not change this file. |
Line 26: | Line 89: |
* Temporary channels in IX0 | == Temporary channels in IX0 == |
Line 30: | Line 93: |
* Temporary channels in IY0 | == Temporary channels in IY0 == |
Line 33: | Line 96: |
--------------- = Channel Name Definition = Definition of the PEM channel name {{{ K1:PEM-(SENSOR)_(AREA)_(LOCATION)_(DOF) }}} ||<#58FA82> Name ||<#58FA82> Purpose || ||<#A9F5E1 :99% -2> SENSOR || || ONDTR || Ondotori sensor || || ACC || Accelerometer || || MIC || Microphone || || MAG || Magnetometer || || SEIS || Seismometer || || WEATHER || Weather station || || SENSOR || This name is not for specific sensor || ||<#A9F5E1 :99% -2> AREA || || PSL|| in the PSL Room area || || IX || around the IX area || || IY || around the IY area || || EX || around the EX area || || EY || around the EY area || || IXV || in the IXV area || || IYV || in the IYV area || || EXV || in the EXV area || || EYV || in the EYV area || || TMSX || around the TMSX area || || TMSY || around the TMSY area || || PCALX || around the PCALX area || || PCALY || around the PCALY area || || PR|| around the PR area including chamber|| || BS|| around the BS area including chamber|| || SR|| around the SR area including chamber|| || IMC|| around the MCi, MCe, MCo area|| || IFI|| around the IFI area including table, chamber || || OMC|| around the OMC area including table, chamber || || POP|| around the POP area including table, chamber || || POS|| around the POS area including talbe, chamber || || --(RACK)-- || --(in the DGS Rack)-- || || --(FIELD)-- || --(on the field)-- || || --(BOOTH)-- || --(in the "any" clean booth)-- || || MOZUMI|| in the mozumi building || || XARM || x arm || || YARM || y arm || ||<#A9F5E1 :99% -2> LOCATION || || CHAMBER_(NAME) || on the chamber. Name : [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1111| here]] || || TABLE_(NAME) || on the table. Name : [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/IOO/OutputTables| here]] || || BOOTH_(NAME) || in the clean booth. Name : [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1662|here?]] || || BEAMDUCT_(NAME) || on the beamduct. Name : [[http://google.com|???]] || || PERI_(NAME) || on the periscope. Name : [[http://google.com|???]] || || FIELD || It means other places. || ||<#A9F5E1 :99% -2> DOF || || X/Y/Z || X,Y,Z axis as KAGRA cordinate || || 18V/24V || type of the DC power supply || || TEMPERATURE/HUMIDITY/PRESSSURE || signals of the both ondotori and weather station || * SENSOR * PEMが管理しているセンサーの種類がここに該当する。 * AREA * エリア名が該当する。 * 三代木さんが定義。[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1110| here]] * LOCATION * センサーが設置されている構造物の名前が該当する。たとえば、クリーンブースや光学定盤の名前。 * クリーンブースは三代木さんが定義。[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1662|here]] * 光学定盤はIOOグループが定義。[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/IOO/OutputTables| here]] * DOF * 1つのセンサーが複数個の出力信号を持つ場合、それぞれの名前が該当する。 --------------- = SDF = == latest snapfile == 2018/12/03 Update, miyo ||<#F0F00F> Model ||<#F0F00F> snapfile ||<#F0F00F> Managed date ||<#F0F00F> klog || || k1pemiy0 || observe.snap || Dec 03 09:49:41 2018 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7249|7249]] || || k1pemix1 || observe.snap || Nov 28 19:27:27 2018 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7249|7249]] || || k1pemex1 || observe.snap || Nov 28 19:25:46 2018 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7249|7249]] || || k1pemey1 || observe.snap || Nov 30 17:15:59 2018 || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7249|7249]] || |
Contents
KAGRA PEM Channel List
Ondotori
PSL(-2018/12/10-)
PEM |
Sensor |
Channel name (_OUT_DQ) |
sampling rate[Hz] |
Picture |
Calibration(unit) |
Memo(S number) |
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE1_Z |
2048 |
m/s^2 |
||
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE2_Z |
2048 |
m/s^2 |
||
accelerometer |
TEAC 710 |
K1:PEM-PSL_ACC_TABLE3_Z |
2048 |
m/s^2 |
||
accelerometer |
KISTLER 8640A5 |
K1:PEM-PSL_ACC_PERI_EXIT |
2048 |
m/s^2 |
||
accelerometer |
KISTLER 8640A5 |
K1:PEM-PSL_ACC_PERI_REFCAV |
2048 |
m/s^2 |
||
magnetometer |
MAG13 MCL100 |
K1:PEM-PSL_MAG_LASERRACK_(X|Y|Z) |
2048 |
T |
MAG13, WF, Distributor, Power removed temporary |
|
microphone |
(B&K) 4188-A-021 |
K1:PEM-PSL_MIC_CENTER |
2048 |
Pa |
||
accelerometer |
KISTLER |
K1:PEM-PSL_ACC_SIGNAL1 |
2048 |
m/s^2 |
||
accelerometer |
KISTLER |
K1:PEM-PSL_ACC_SIGNAL2 |
2048 |
m/s^2 |
CS(-2018/12/10-)
PEM |
Sensor |
Channel name (_OUT_DQ) |
sampling rate[Hz |
Picture |
Calibration(unit) |
Memo(S number) |
microphone |
AT-VD6 No.1 |
K1:PEM-IMC_MIC_REFL |
2048 |
Pa |
||
accelerometer |
TEAC706 |
K1:PEM-IMC_ACC_REFL_TABLE |
2048 |
m/s^2 |
||
microphone |
AT-VD6 No.2 |
K1:PEM-IMC_MIC_TRANS |
2048 |
[[|pic]] |
Pa |
|
microphone |
(B&K) 4188-A-021 |
K1:PEM-IFI_MIC_REFL |
2048 |
Pa |
||
accelerometer |
TEAC710 |
K1:PEM-IFI_ACC_REFL_TABLE |
2048 |
m/s^2 |
||
microphone |
(B&K) 4188-A-021 |
K1:PEM-POP_MIC |
2048 |
Pa |
||
accelerometer |
TEAC710 |
K1:PEM-POP_ACC_TABLE |
2048 |
m/s^2 |
||
microphone |
ACO 7146NL/4152 |
K1:PEM-POS_MIC |
2048 |
Pa |
||
accelerometer |
TEAC710 |
K1:PEM-POS_ACC_TABLE |
2048 |
m/s^2 |
||
microphone |
ACO 7146/4152 |
K1:PEM-OMC_MIC |
2048 |
Pa |
||
accelerometer |
TEAC710 |
K1:PEM-OMC_ACC_TABLE |
2048 |
m/s^2 |
||
microphone |
ACO 7146/4152 |
K1:PEM-BS_MIC |
2048 |
Pa |
||
microphone |
ACO 7146/4152 |
K1:PEM-SR_MIC |
2048 |
Pa |
EX(-201X/XX/XX)
- PCal Tx table (TEAC710)
- PCal Rx table (TEAC710)
- EXA area (ACO mic)
- EXC/EXV area (ACO mic)
- EXV talbe (TEAC706)
- EXC area (magnetometer)
EY(-201X/XX/XX)
- PCal Tx table (TEAC710)
- PCal Rx table (TEAC710)
- EYA area (ACO mic)
- EYC/EYV area (ACO mic)
- EYV talbe (TEAC706)
- EYC area (magnetometer)
Seismometer
Snumber |
Installed Place (ADC port) |
Name |
Channel name (OUT_DQ) |
Unit |
fs [Hz] |
klog |
EXV (IX1, ADC0, 24-26) |
Trillium 12QA |
K1:PEM-IXV_GND_TR120Q_(X/Y/Z)_OUT_DQ |
um/s |
512 |
||
EXV (EX1, ADC0, 24-26) |
Trillium 120QA |
K1:PEM-EXV_GND_TR120Q_(X/Y/Z)_OUT_DQ |
um/s |
512 |
||
EYV (EY1, ADC0, 24-26) |
Trillium 120QA |
K1:PEM-EYV_GND_TR120Q_(X/Y/Z)_OUT_DQ |
um/s |
512 |
||
IXV (IX1, ADC0, 28-30) |
Trillium 120QA |
K1:PEM-IXV_GND_TR120QTEST_(X/Y/Z)_OUT_DQ |
um/s |
512 |
||
MCe (IOO1, ADC1, 4-6) |
Trillium compact 120-SV1 |
K1:PEM-IMC_GND_TR120C_MCE_(X/Y/Z)_OUT_DQ |
um/s |
512 |
|
|
MCi (IOO1, ADC1, 0-2) |
Trillium compact 120-SV1 |
K1:PEM-IMC_GND_TR120C_MCI_(X/Y/Z)_OUT_DQ |
um/s |
512 |
|
|
Fukuoka Univ. |
Trillium compact 120-SV1 |
??? |
--- |
512 |
|
Selfnoiseのグラフを載せる
Air Environment Sensors
Snumber |
Installed Place (ADC port) |
Name |
Channel name (xxx_OUT_DQ) |
Unit |
Sample rate [Hz] |
IXV (IX1, ADC1, 24-27) |
No.5 |
K1-IXV_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
|
IYV (IY1, ADC1, 24-27) |
|
|
|
128 |
|
EXV (EX1, ADC1, 24-27) |
--- |
K1-EXV_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
|
EYV (EY1, ADC1, 24-27) |
--- |
K1-EYV_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
|
IXC (IX0, ADC0, 16-27?) |
|
|
|
128 |
|
IYC (IY0, ADC0, 20-23) |
No6 |
K1-IYC_WEATHER_{TEMP,HUMD,PRES}_ |
Degree, %, Pa |
128 |
Acording to JGW-T1809269, calibration factor from output voltage to each unit is given with
temp = ( Vout/78/0.001-100)/0.388 [deg_c] humd = (Vout/2)/5*100 [%] pressure = (Vout/2)/5*300 + 800 [hPa]
Then, "_GAIN" and "_OFFSET" parameters in cds filter of each channels are calculated by above equation with count value not voltage,
Name |
Value |
Unit |
_TEMP_OFFSET |
-1.278e4 |
count |
_HUMD_OFFSET |
0.0 |
count |
_PRES_OFFSET |
4.369e4 |
count |
_TEMP_GAIN |
2.017e-2 |
deg_c/count |
_HUMD_GAIN |
6.104e-3 |
%/count |
_PRES_GAIN |
1.831e-2 |
hPa/count |
,where ransformation coefficient from voltage to adc count is given with c2V = 2.0 * 10/2**15 [V/count], because output signal from sensor is measured with single-end not differential. These parameters are managed by SDF with observe.snap. So, plase do not change this file.
Place Sensor Channel name picture Memo IX0 Temporary K1:PEM-IX0_SENSOR(1-12) pic Will be removed
Place Sensor Channel name picture Memo IY0 Temporary K1:PEM-IY0_SENSOR(1-12) pic Will be removed
Definition of the PEM channel name Name Purpose SENSOR ONDTR Ondotori sensor ACC Accelerometer MIC Microphone MAG Magnetometer SEIS Seismometer WEATHER Weather station SENSOR This name is not for specific sensor AREA PSL in the PSL Room area IX around the IX area IY around the IY area EX around the EX area EY around the EY area IXV in the IXV area IYV in the IYV area EXV in the EXV area EYV in the EYV area TMSX around the TMSX area TMSY around the TMSY area PCALX around the PCALX area PCALY around the PCALY area PR around the PR area including chamber BS around the BS area including chamber SR around the SR area including chamber IMC around the MCi, MCe, MCo area IFI around the IFI area including table, chamber OMC around the OMC area including table, chamber POP around the POP area including table, chamber POS around the POS area including talbe, chamber RACK in the DGS Rack FIELD on the field BOOTH in the "any" clean booth MOZUMI in the mozumi building XARM x arm YARM y arm LOCATION CHAMBER_(NAME) on the chamber. Name : here TABLE_(NAME) on the table. Name : here BOOTH_(NAME) in the clean booth. Name : here? BEAMDUCT_(NAME) on the beamduct. Name : ??? PERI_(NAME) on the periscope. Name : ??? FIELD It means other places. DOF X/Y/Z X,Y,Z axis as KAGRA cordinate 18V/24V type of the DC power supply TEMPERATURE/HUMIDITY/PRESSSURE signals of the both ondotori and weather station 三代木さんが定義。here
2018/12/03 Update, miyo Temporary channels in IX0
Temporary channels in IY0
Channel Name Definition
K1:PEM-(SENSOR)_(AREA)_(LOCATION)_(DOF)
SDF
latest snapfile