Weekly PEM meeting
- 2020/01/06(Tue) 16:00-(JST)
- Regular meeting meeting (Japanese)
- Web meeting with Zoom2 (Zoom2) 
Agenda
General issue
- Interferometer status - December 17-24 24h engineering run - We also held the post ER. We turned off the FFUs and vacuum pumps
 
- Lock acquisition to PRFPMI
- There is still some peaks in the lower frequency - Type-A resonant frequency etc...
 
- Peaks appeared at higher frequency - PEM injection to REFL table
 
- Until Jan. 13th, ASC and lock trial of the PRFPMI will be higher priority
- After that, we will move to noise hunting
- ~100Hz noise and line noise of the higher frequency -> PEM 
 
- December 17-24 24h engineering run 
- PEM plan January - Identification of the =100Hz noise source - (Maybe, ) the dominant noise for lower frequency may come from suspension
 
- After the success of the PRFPMI (or chance to operate the FPMI), we would like to do following things - Jitter noise analysis - Camilla and Washimi-san evaluated the jitter noise at PSL room, but two order lower than current noise
- But, we don't know the higher frequency
 
- Understanding the coupling function detected at the refl table - At the some point, we detected the larger coupling function
- Periscope or some optics?
 
- We would like to inject sound or vibration to AS, POP and TMS table
- Long term PEM evaluation
 
- Jitter noise analysis 
 
- Identification of the =100Hz noise source 
- ICRR Kyodo-riyo - Yokozawa and Washimi-san prepared
 
- PEM festival - This week(Friday?) - Evaluate the optical levers - Check OpLev cover is enough for O3 or not 
- Resonant frequency
 
 
- Evaluate the optical levers 
- 01/14(Tue) 9:00-15:00  - Evaluate the scattered light for payload (with CRY team) http://klog.icrr.u-tokyo.ac.jp/osl/?r=12293 
 
- 01/15(Wed) ?? - Turned off almost all FFUs and vacuum pumps
 
 
- This week(Friday?) 
- Conference - 地下宇宙若手研究会@茂住 (2/22-24) 
- JPS (2020/3/16-19 @ Nagoya) - Yokozawa, TTanaka
 
- KIW7
 
- PEM injection - Shaker injection1 (TTanaka, Yokozawa) - Where is the PZT shaker driver?
- Acoustic injection -> Shaker injection 
 
- Shaker injection2 (Washimi, Camilla) - Bluetooth shaker + Chromebook http://klog.icrr.u-tokyo.ac.jp/osl/?r=12187 
- optical table, oplev, ...
 
- acoustic injection (TTanaka, Yokozawa) - PSL, REFL and AS table injection
- Analysis is ongoing
 
- magnetic field injection (Niigata Tanaka, Fujikawa, Yokozawa) - Effect of the air cooler magnetic field
- AS, REFL table injection
 
 
- Shaker injection1 (TTanaka, Yokozawa) 
- Newtonian noise measurement - Thank you for Virgo PEM member!
- Francesca mainly measured the newtonian noise
- We will discuss in 21st. Jan.(Virgo KAGRA PEM meeting)
 
- PEM measurement - Someday : Effect of the sound to DARM displacement
- Someday : Environmental check around BS (including the POP)
- Someday : Evaluation of the table cover
- Someday : SR2 and SR3 optical lever (Reflection light from SRM?)
 
Each progress
- Yokozawa - Suspension resonant frequency (with CRY and VIS team)
- Post ER report1
- Planning toward the O3 run
 
- Washimi - post ER JGW-G2011165 
- Beam jitter study (Follow Camilla study, reported by Yokozawa?)
- Sound reverberation study (KAGRA & Virgo) 
 
- Kozakai - Trigger analysis with ER run for the part of the PEM
- Offline detchar report for the part of the PEM
 
- TTanaka(ICRR) - shaker injection with FPMIspeaker@12/8,shaker@12/15,meeting pdf 
- Master thesisthesis 
 
- Fujikawa - Lock loss study2
- fujimopy
 
- TTanaka(Niigata) - Magnetic field from air cooler and compressor
- Magnetic field injection to AS and REFL table
 
- etc