• KAGRA
• Subgroups
• PEM
• Meeting
• 200107
• Agenda

Weekly PEM meeting

• 2020/01/06(Tue) 16:00-(JST)
• Regular meeting meeting (Japanese)

• Web meeting with Zoom2 (Zoom2)

Agenda

General issue

• Interferometer status
  • December 17-24 24h engineering run

    • wiki

    • We also held the post ER. We turned off the FFUs and vacuum pumps
  • Lock acquisition to PRFPMI
  • There is still some peaks in the lower frequency
    • Type-A resonant frequency etc...
  • Peaks appeared at higher frequency
    • PEM injection to REFL table
  • Until Jan. 13th, ASC and lock trial of the PRFPMI will be higher priority
  • After that, we will move to noise hunting

  • ~100Hz noise and line noise of the higher frequency -> PEM

• PEM plan January
  • Identification of the =100Hz noise source
    • (Maybe, ) the dominant noise for lower frequency may come from suspension
  • After the success of the PRFPMI (or chance to operate the FPMI), we would like to do following things
    • Jitter noise analysis
      • Camilla and Washimi-san evaluated the jitter noise at PSL room, but two order lower than current noise
      • But, we don't know the higher frequency
    • Understanding the coupling function detected at the refl table
      • At the some point, we detected the larger coupling function
      • Periscope or some optics?
    • We would like to inject sound or vibration to AS, POP and TMS table
    • Long term PEM evaluation

Edit conflict - other version:

• ICRR Kyodo-riyo
  • Yokozawa and Washimi-san prepared

Edit conflict - your version:

End of edit conflict

• PEM festival
  • This week(Friday?)
    • Evaluate the optical levers

      • Check OpLev cover is enough for O3 or not

      • Resonant frequency
  • 01/14(Tue) 9:00-15:00

    • Evaluate the scattered light for payload (with CRY team) http://klog.icrr.u-tokyo.ac.jp/osl/?r=12293

  • 01/15(Wed) ??
    • Turned off almost all FFUs and vacuum pumps
• Conference

  • 地下宇宙若手研究会 (2/22-24)

  • JPS (2020/3/16-19 @ Nagoya)
    • Yokozawa, TTanaka
  • KIW7
• PEM injection
  • Shaker injection1 (TTanaka, Yokozawa)
    • Where is the PZT shaker driver?

    • Acoustic injection -> Shaker injection

  • Shaker injection2 (Washimi, Camilla)

    • Bluetooth shaker + Chromebook http://klog.icrr.u-tokyo.ac.jp/osl/?r=12187

    • optical table, oplev, ...
  • acoustic injection (TTanaka, Yokozawa)
    • PSL, REFL and AS table injection
    • Analysis is ongoing
  • magnetic field injection (Niigata Tanaka, Fujikawa, Yokozawa)
    • Effect of the air cooler magnetic field
    • AS, REFL table injection
• Newtonian noise measurement
  • Thank you for Virgo PEM member!
  • Francesca mainly measured the newtonian noise
  • We will discuss in 21st. Jan.(Virgo KAGRA PEM meeting)
• PEM measurement
  • Someday : Effect of the sound to DARM displacement
  • Someday : Environmental check around BS (including the POP)
  • Someday : Evaluation of the table cover
  • Someday : SR2 and SR3 optical lever (Reflection light from SRM?)

Each progress

• Yokozawa
  • Suspension resonant frequency (with CRY and VIS team)
  • Post ER report1
  • Planning toward the O3 run
• Washimi

  • post ER JGW-G2011165

  • Beam jitter study (Follow Camilla study, reported by Yokozawa?)

  • Sound reverberation study (KAGRA & Virgo)

• Kozakai
  • Trigger analysis with ER run for the part of the PEM
  • Offline detchar report for the part of the PEM
• TTanaka(ICRR)
  • shaker injection with FPMI
• Fujikawa
  • Lock loss study2
  • fujimopy
• TTanaka(Niigata)
  • Magnetic field from air cooler and compressor
  • Magnetic field injection to AS and REFL table
• etc