Acceptance Test

Flow chart

WorkFlow

A: Design phase

Check sheets templates for A

A01 : Could the simulation satisfy the requirement?

Input

KAGRA requirements

Input the design sensitivity
Input the DAC limit

Suspension model

plant model : rigid body model by SUMCON
control model : LTI model by Matlab simlink
noise model : seismic noise, control noise

Content

Output

Transfer function

transfer function of the suspension

Noises

requirement for sensor noises
requirement for actuator noises

B: Installation phase

Check sheets templates for B

B01

Cable connection
- Resistance (Ohom)
- Continuity (OK/NO)
Calibration (LVDT, ACC)
- Calibration (plot, polarity, coefficient)
- Sensor noise (plot)
Working point and dynamic range with FR, Limit SW
- Range (from -mm to +mm)
- Minimum range (mm)
- Optimal point (mm)
- Limit SW (on/off)
Tuned frequencies of GAS Filter/IP
- Frequency (TF, actuator efficiency)
- Maximum frequency (Hz)

B02

Please write
- aaaa

B03

Please write
- aaaa

B04

Please write
- aaaa

C: Integration phase

Check sheets templates for C

C01

Damping time
- RMS in spectrum (plot)
Healthy check
- Transfer function (plot)
- Resonant frequencies (PreQUA)
Noise budget
- Spectrum (plot)
Automation
- check the guardian transition

C02

Please write
- aaaa

KAGRA/Subgroups/VIS/Acceptance Test (last edited 2020-12-04 11:38:31 by KousekiMiyo)

-  ⇤ ← Revision 1 as of 2020-08-27 14:06:18 → 
  Size: 737
  Editor: RyutaroTakahashi
  Comment:
+   ← Revision 33 as of 2020-09-23 17:54:56 → ⇥
  Size: 1942
  Editor: KousekiMiyo
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
+<<TableOfContents(3)>>
-Line 2:
+Line 4:
+== Flow chart ==
{{https://gwdoc.icrr.u-tokyo.ac.jp/DocDB/0120/E2012025/003/VISworkflow-Overview.png|WorkFlow|width=600}}
-Line 3:
+Line 7:
-== Check items on Hardware ==
=== Cable connection ===
* Resistance (Ohom)
* Continuity (O/X)
+== A: Design phase ==
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxx|Check sheets templates for A]]
-Line 8:
+Line 10:
-=== Calibration (LVDT, ACC) ===
* Calibration (plot, polarity, coefficient)
* Sensor noise (plot)
+=== A01 : Could the simulation satisfy the requirement? ===
==== Input ====
KAGRA requirements
  * Input the design sensitivity 
  * Input the DAC limit
-Line 12:
+Line 16:
-=== Working point and dynamic range with FR, Limit SW ===
* Range (from -mm to +mm)
* Minimum range (mm)
* Optimal point (mm)
* Limit SW (on/off)
+Suspension model
 * plant model : rigid body model by SUMCON
 * control model : LTI model by Matlab simlink
 * noise model : seismic noise, control noise
-Line 18:
+Line 21:
-=== Tuned frequencies of GAS Filter/IP ===
* Frequency (TF, actuator efficiency)
* Maximum frequency (Hz)
+==== Content ====
-Line 22:
+Line 23:
-== Check items on Software (Control) ==
=== Healthy check template ===
* Transfer function (plot)
* Resonant frequencies (PreQUA)
-Line 27:
+Line 24:
-=== Damping time ===
* RMS in spectrum (plot)
+==== Output ====
Transfer function
 * transfer function of the suspension
-Line 30:
+Line 28:
-=== Noise budget ===
* Spectrum (plot)
+Noises
 * requirement for sensor noises
 * requirement for actuator noises
-Line 33:
+Line 32:
-=== Guardian ===
+== B: Installation phase ==
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11957|Check sheets templates for B]]

=== B01 ===
 * Cable connection
  * Resistance (Ohom)
  * Continuity (OK/NO)
 * Calibration (LVDT, ACC)
  * Calibration (plot, polarity, coefficient)
  * Sensor noise (plot)
 * Working point and dynamic range with FR, Limit SW
  * Range (from -mm to +mm)
  * Minimum range (mm)
  * Optimal point (mm)
  * Limit SW (on/off)
 * Tuned frequencies of GAS Filter/IP
  * Frequency (TF, actuator efficiency)
  * Maximum frequency (Hz)

=== B02 ===
 * Please write
  * aaaa

=== B03 ===
 * Please write
  * aaaa

=== B04 ===
 * Please write
  * aaaa

== C: Integration phase ==
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxx|Check sheets templates for C]]

=== C01 ===
 * Damping time 
  * RMS in spectrum (plot)
 * Healthy check
  * Transfer function (plot)
  * Resonant frequencies (PreQUA)
 * Noise budget
  * Spectrum (plot)
 * Automation
  * check the guardian transition

=== C02 ===
 * Please write
  * aaaa