Acceptance Test

Flow chart

WorkFlow

A: Design phase

Check sheets templates for A

A01 : Could the simulation satisfy the requirement?

Input

KAGRA requirements

Input the design sensitivity (ref. xxx)
Input the DAC limit (ref. xxx)

Suspension model

plant model : rigid body model by SUMCON (ref. xxx)
control model : LTI model by Matlab simlink (ref. xxx)
noise model : seismic noise, control noise (ref. xxx)

Content

Output

Transfer function

transfer function of the suspension (ref. xxx)

Noises

requirement for sensor noises (ref. xxx)
requirement for actuator noises (ref. xxx)

B: Installation phase

Check sheets templates for B

B01

Cable connection
- Resistance (Ohom)
- Continuity (OK/NO)
Calibration (LVDT, ACC)
- Calibration (plot, polarity, coefficient)
- Sensor noise (plot)
Working point and dynamic range with FR, Limit SW
- Range (from -mm to +mm)
- Minimum range (mm)
- Optimal point (mm)
- Limit SW (on/off)
Tuned frequencies of GAS Filter/IP
- Frequency (TF, actuator efficiency)
- Maximum frequency (Hz)

B02

Please write
- aaaa

B03

Please write
- aaaa

B04

Please write
- aaaa

C: Integration phase

Check sheets templates for C

C01

Damping time
- RMS in spectrum (plot)
Healthy check
- Transfer function (plot)
- Resonant frequencies (PreQUA)
Noise budget
- Spectrum (plot)
Automation
- check the guardian transition

C02

Please write
- aaaa

KAGRA/Subgroups/VIS/Acceptance Test (last edited 2020-12-04 11:38:31 by KousekiMiyo)

-  ⇤ ← Revision 16 as of 2020-09-23 14:47:21 → 
  Size: 1453
  Editor: KousekiMiyo
  Comment:
+   ← Revision 35 as of 2020-09-23 17:56:18 → ⇥
  Size: 2029
  Editor: KousekiMiyo
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
+== Flow chart ==
{{https://gwdoc.icrr.u-tokyo.ac.jp/DocDB/0120/E2012025/003/VISworkflow-Overview.png|WorkFlow|width=600}}

== A: Design phase ==
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxx|Check sheets templates for A]]

=== A01 : Could the simulation satisfy the requirement? ===
==== Input ====
KAGRA requirements
  * Input the design sensitivity (ref. xxx)
  * Input the DAC limit (ref. xxx)

Suspension model
 * plant model : rigid body model by SUMCON (ref. xxx)
 * control model : LTI model by Matlab simlink (ref. xxx)
 * noise model : seismic noise, control noise (ref. xxx)

==== Content ====
-Line 6:
+Line 24:
-{{attachment:VISworkflow-Overview.png|width=400}}
+==== Output ====
Transfer function
 * transfer function of the suspension (ref. xxx)
-Line 8:
+Line 28:
-== A: Design phase ==
=== Templates for A ===
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxx|Check sheets]]

=== A01 ===
 * hoge
+Noises
 * requirement for sensor noises (ref. xxx)
 * requirement for actuator noises (ref. xxx)
-Line 16:
+Line 33:
-=== Templates for B ===
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11957|Check sheets]]
+[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11957|Check sheets templates for B]]
-Line 36:
+Line 52:
+ * Please write
  * aaaa
-Line 38:
+Line 56:
+ * Please write
  * aaaa
-Line 40:
+Line 60:
+ * Please write
  * aaaa
-Line 43:
+Line 64:
-=== Templates for C ===
[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxx|Check sheets]]
+[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=xxx|Check sheets templates for C]]
-Line 47:
+Line 67:
+ * Damping time 
  * RMS in spectrum (plot)
-Line 50:
+Line 72:
+ * Noise budget
  * Spectrum (plot)
 * Automation
  * check the guardian transition
-Line 52:
+Line 78:
-------




== Check items on Software (Control) ==
=== Healthy check template ===
 * Transfer function (plot)
 * Resonant frequencies (PreQUA)

=== Damping time ===
 * RMS in spectrum (plot)

=== Noise budget ===
 * Spectrum (plot)

=== Guardian ===
+ * Please write
  * aaaa