Differences between revisions 20 and 21
⇤ ← Revision 20 as of 2020-09-23 14:54:01 →
Size: 1513
Editor: KousekiMiyo
Comment:
← Revision 21 as of 2020-09-23 14:54:23 → ⇥
Size: 1529
Editor: KousekiMiyo
Comment:
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
== Overview ==

Contents

  1. Acceptance Test
    1. Overview
    2. A: Design phase
      1. Templates for A
      2. A01
    3. B: Installation phase
      1. Templates for B
      2. B01
      3. B02
      4. B03
      5. B04
    4. C: Integration phase
      1. Templates for C
      2. C01
      3. C02
    5. Check items on Software (Control)
      1. Healthy check template
      2. Damping time
      3. Noise budget
      4. Guardian

Acceptance Test

Overview

ALS Configuration

A: Design phase

Templates for A

Check sheets

A01

  • hoge

B: Installation phase

Templates for B

Check sheets

B01

  • Cable connection
    • Resistance (Ohom)
    • Continuity (OK/NO)
  • Calibration (LVDT, ACC)
    • Calibration (plot, polarity, coefficient)
    • Sensor noise (plot)
  • Working point and dynamic range with FR, Limit SW
    • Range (from -mm to +mm)
    • Minimum range (mm)
    • Optimal point (mm)
    • Limit SW (on/off)
  • Tuned frequencies of GAS Filter/IP
    • Frequency (TF, actuator efficiency)
    • Maximum frequency (Hz)

B02

B03

B04

C: Integration phase

Templates for C

Check sheets

C01

  • Healthy check
    • Transfer function (plot)
    • Resonant frequencies (PreQUA)

C02

Check items on Software (Control)

Healthy check template

  • Transfer function (plot)
  • Resonant frequencies (PreQUA)

Damping time

  • RMS in spectrum (plot)

Noise budget

  • Spectrum (plot)

Guardian

KAGRA/Subgroups/VIS/Acceptance Test (last edited 2020-12-04 11:38:31 by KousekiMiyo)