Differences between revisions 33 and 34

bKAGRA Suspensions Actuator Design Summary

suspension and stage	coil	magnet	coil-magnet	coil driver
MCi/e/o (Type-C) TM	41 turns by default (some are 40 turns?), ~2.5 Ohms(klog#2124)	NdFeB 1mm dia, 5mm thick	0.0014 N/A at max	TAMA
IM	-	-	-	-
IMMT1/2 (Type-C) TM	39 turns ?	NdFeB 2mm dia, 5mm thick		high power
IM	-	-	-	-
PR2/3/M (Type-Bp) TM	600 turns	SmCo 6mm dia, 3mm thick	0.129 N/A at max	high power
IM	600 turns	SmCo 10mm dia, 10mm thick	1.26 N/A at max	high power
BS (Type-B) TM	600 turns, ~11 Ohms	SmCo 2mm dia, 3mm thick	0.0138N/A at max	low power
IM	600 turns, ~13 Ohms	SmCo 10mm dia, 10mm thick	1.25 N/A at max	low power
SR2/3/M (Type-B) TM	600 turns	SmCo 2mm dia, 5mm thick	0.0225 N/A at max	low power
IM	600 turns	SmCo 10mm dia, 10mm thick	1.26 N/A at max	low power
ITM/ETM (Cryopayload) TM	100 turns, 17 Ohms (measured at room temp; estimated to be 0.6 Ohms for cryogenic)	SmCo(?) 2mm dia, 2mm thick ?	0.0015 N/A at max (measured at room temp with 88turns)	low power
IM	600 turns, 57 Ohms (measured at room temp; estimated to be 2 Ohms for cryogenic)	SmCo(?) 2mm dia, 2mm thick ?	0.015 N/A at max (measured at room temp with 585turns)	low power(with R65 and R97 700Ohm)
Marionette	600 turns, 57 Ohms (measured at room temp; estimated to be 2 Ohms for cryogenic)	SmCo(?) 5mm dia, 13mm thick ?	0.45 N/A at max (measured at room temp with 585turns)	low power(with R65 and R97 700Ohm)

Coil Drivers

TAMA coil driver has 50 Ohm, 20 mA/V. EL2099, 440 mA at max. Summary by Koji Arai is here.
Low Power Coil Driver (JGW-D1503507) has 7.8 kOhm at DC (1.3 kOhm above 312 Hz), 0.128*1.33 mA/V at DC (voltage gain of 1.33 is applied in the driver). AD8671, 10 mA at max.
High Power Coil Driver (JGW-D1503503) has 80 Ohm, 12.5 mA/V at DC. OPA548, 3 A at max.

-  ⇤ ← Revision 33 as of 2017-07-12 10:48:22 → 
  Size: 3018
  Editor: YutaMichimura
  Comment:
+   ← Revision 34 as of 2017-07-12 10:51:22 → ⇥
  Size: 3071
  Editor: YutaMichimura
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 20:
- * Low Power Coil Driver ([[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=3507|JGW-D1503507]]) has 7.8 kOhm at DC (1.3 kOhm above 312 Hz), 0.128 mA/V at DC. AD8671, 10 mA at max.
+ * Low Power Coil Driver ([[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=3507|JGW-D1503507]]) has 7.8 kOhm at DC (1.3 kOhm above 312 Hz), 0.128*1.33 mA/V at DC (voltage gain of 1.33 is applied in the driver). AD8671, 10 mA at max.