|
Size: 7692
Comment:
|
Size: 8677
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 3: | Line 3: |
| This page collects information on part drawings for the suspensions. So far only the Type Bp payload is covered. | This page collects information on part drawings for the suspensions. So far only the Type B payload is covered. |
| Line 9: | Line 9: |
| ||•test_mass_assembly||1|| || || || || || ||••Part-2-mirror||1|| || || || || || ||••Part-1-cilinder_recoil_mass||1|| || || || || || ||••Part-3-back recoil mass||1|| || || || || || ||••Part-4.1-large front recoil mass||1|| || || || || || ||••Part-19-damper_new||1|| || || || || || ||••Part-22-support_cables_on_mirror_new||1|| || || || || || ||••osem_assembly||4|| || || || || || ||••Assembly_front_ball_screw_recycler||4|| || || || || || ||••Assembly_extra_long_screw_ball||4|| || || || || || ||••Assembly_screw_ball_recycler||4|| || || || || || ||••wire_breaker_RM||2|| || || || || || ||••wire_pairs_TM_assembly||2|| || || || || || ||••Part-27-counterweight_thick||4|| || || || || || ||••clamp_wire_breaker_RM||2|| || || || || || ||••wire_breaker_prism||1|| || || || || || ||••wire_breaker_secondary_metal||2|| || || || || || ||••wire_extension||4|| || || || || || |
||*test_mass_assembly||1|| || || || || || ||**Part-2-mirror||1|| || || || || || ||**Part-1-cilinder_recoil_mass||1|| || || || || || ||**Part-3-back recoil mass||1|| || || || || || ||**Part-4.1-large front recoil mass||1|| || || || || || ||**Part-19-damper_new||1|| || || || || || ||**Part-22-support_cables_on_mirror_new||1|| || || || || || ||**osem_assembly||4|| || || || || || ||**Assembly_front_ball_screw_recycler||4|| || || || || || ||**Assembly_extra_long_screw_ball||4|| || || || || || ||**Assembly_screw_ball_recycler||4|| || || || || || ||**wire_breaker_RM||2|| || || || || || ||**wire_pairs_TM_assembly||2|| || || || || || ||**Part-27-counterweight_thick||4|| || || || || || ||**clamp_wire_breaker_RM||2|| || || || || || ||**wire_breaker_prism||1|| || || || || || ||**wire_breaker_secondary_metal||2|| || || || || || ||**wire_extension||4|| || || || || || |
| Line 28: | Line 28: |
| ||•intermediate_assembly||1|| || || || || || ||••intermediate_mass_new||1|| || || || || || ||•••B-Part-50-base internal box||1|| || || || || || ||•••B-Part-51-mass regulation centre of gravity||1|| || || || || || ||•••B-Part-51bis-mass regulation centre of gravity||1|| || || || || || ||•••Picomotor 8032-UHV||2|| || || || || || ||•••Molla di compressione||1|| || || || || || ||•••Part-20-security fixing||4|| || || || || || ||•••B-Part-62-cap||1|| || || || || || ||•••Assembly flag intermediate mass||6|| || || || || || ||•••Part-23-spacer spring||2|| || || || || || ||•••Part-32-nut magnet's plate||1|| || || || || || ||•••Part-35-cone||1|| || || || || || ||•••Part-33-nut for connection wire||1|| || || || || || ||•••Part10028-wire-intermediate-bottom filter||1|| || || || || || ||•••mass_compensation_top_cavity||2|| || || || || || ||•••mass_compensation_bottom_cavity||2|| || || || || || ||•••support_upper_mass||4|| || || || || || ||•••B-Part-54-support picomotor_new||2|| || || || || || ||•••C-Part-85-small support cables-25_new||2|| || || || || || ||•••B-Part-53-side_2_internal_box_new||1|| || || || || || ||•••Clamp_on_IM||4|| || || || || || ||•••B-Part-53bis-side_2_internal_box_new||1|| || || || || || ||•••alignment_slab||2|| || || || || || ||•••clamp_assembly_new||2|| || || || || || ||•••B-Part-52-side_1_internal_box_new||1|| || || || || || ||••• B-Part-52bis-side_1_internal_box_new ||1|| || || || || || ||•••B-Part-34-connection_main_wire||1|| || || || || || ||•••lock_internal_mass_assembly||4|| || || || || || ||•••wires_pair_RM_assembly||2|| || || || || || ||•••Part-10001-nuovo clamp of security bar||2|| || || || || || ||•••Part-10002-security-bar||2|| || || || || || ||•••||1|| || || || || || ||•••||1|| || || || || || ||•••||1|| || || || || || |
||*intermediate_assembly||1|| || || || || || ||**intermediate_mass_new||1|| || || || || || ||***B-Part-50-base internal box||1|| || || || || || ||***B-Part-51-mass regulation centre of gravity||1|| || || || || || ||***B-Part-51bis-mass regulation centre of gravity||1|| || || || || || ||***Picomotor 8032-UHV||2|| || || || || || ||***Molla di compressione||1|| || || || || || ||***Part-20-security fixing||4|| || || || || || ||***B-Part-62-cap||1|| || || || || || ||***Assembly flag intermediate mass||6|| || || || || || ||***Part-23-spacer spring||2|| || || || || || ||***Part-32-nut magnet's plate||1|| || || || || || ||***Part-35-cone||1|| || || || || || ||***Part-33-nut for connection wire||1|| || || || || || ||***Part10028-wire-intermediate-bottom filter||1|| || || || || || ||***mass_compensation_top_cavity||2|| || || || || || ||***mass_compensation_bottom_cavity||2|| || || || || || ||***support_upper_mass||4|| || || || || || ||***B-Part-54-support picomotor_new||2|| || || || || || ||***C-Part-85-small support cables-25_new||2|| || || || || || ||***B-Part-53-side_2_internal_box_new||1|| || || || || || ||***Clamp_on_IM||4|| || || || || || ||***B-Part-53bis-side_2_internal_box_new||1|| || || || || || ||***alignment_slab||2|| || || || || || ||***clamp_assembly_new||2|| || || || || || ||***B-Part-52-side_1_internal_box_new||1|| || || || || || ||*** B-Part-52bis-side_1_internal_box_new ||1|| || || || || || ||***B-Part-34-connection_main_wire||1|| || || || || || ||***lock_internal_mass_assembly||4|| || || || || || ||***wires_pair_RM_assembly||2|| || || || || || ||***Part-10001-nuovo clamp of security bar||2|| || || || || || ||***Part-10002-security-bar||2|| || || || || || ||***||1|| || || || || || ||***||1|| || || || || || ||***||1|| || || || || || |
| Line 64: | Line 64: |
| ||••C-Assembly external box_new||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || || ||1|| || || || || || |
||**C-Assembly external box_new||1|| || || || || || ||***C-Part-73-lateral1_new||4|| || || || || || ||***osem_new_with_individual_holder_IRM_lateral||3|| || || || || || ||***C-Part-76-cover_external_box_new||1|| || || || || || ||***C-Part-88-support spider||3|| || || || || || ||*** osem_new_with_individual_holder_IRM_lateral||3|| || || || || || ||***Part-10029-wire bottom filter-recoil mass||3|| || || || || || ||***Part-10035-fastening suspesion wire||3|| || || || || || || || || || || || || || ||*security_frame_assembly||1|| || || || || || ||**Part-10004-safety_structure_disk_2_new||1|| || || || || || ||**Part-10022-security_intermediate_mass_new||2|| || || || || || ||**Part-10007-rod security structure 526||4|| || || || || || ||**IRM_extension_inner_part||4|| || || || || || ||**IRM_extension_outer_part||4|| || || || || || ||**OSEM_holder_support_aid||1|| || || || || || ||**OSEM_holder_support_aid_2||1|| || || || || || ||**Part-10009-rod security structure 650||3|| || || || || || ||**Part-10008-safety structure disk 3|||| || || || || || ||**Part-10025-lateral security locking||4|| || || || || || ||**Part-10023-clamp intermediate mass||4|| || || || || || ||**security_frame_for_RM_assembly||2|| || || || || || ||***Part-10021-lateral locking recoil mass||2|| || || || || || ||***Part-10020-plate locking recoil mass||2|| || || || || || ||**Part-10010-safety stucture disk double||1|| || || || || || ||**Part-10006-rod security structure 515||3|| || || || || || ||**Part-10005-rod security structure 602||3|| || || || || || || || || || || || || || || || || || || || || || |
KAGRA VIS Operations Manual - Drawings List
This page collects information on part drawings for the suspensions. So far only the Type B payload is covered.
Assembly/Part Name (Inventor) |
Qty |
Part Name (PDF) |
Folder (on \\Rm214\f\) |
File |
Description |
Notes |
|
|
|
|
|
|
|
payload_general_assembly |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
*test_mass_assembly |
1 |
|
|
|
|
|
**Part-2-mirror |
1 |
|
|
|
|
|
**Part-1-cilinder_recoil_mass |
1 |
|
|
|
|
|
**Part-3-back recoil mass |
1 |
|
|
|
|
|
**Part-4.1-large front recoil mass |
1 |
|
|
|
|
|
**Part-19-damper_new |
1 |
|
|
|
|
|
**Part-22-support_cables_on_mirror_new |
1 |
|
|
|
|
|
**osem_assembly |
4 |
|
|
|
|
|
**Assembly_front_ball_screw_recycler |
4 |
|
|
|
|
|
**Assembly_extra_long_screw_ball |
4 |
|
|
|
|
|
**Assembly_screw_ball_recycler |
4 |
|
|
|
|
|
**wire_breaker_RM |
2 |
|
|
|
|
|
**wire_pairs_TM_assembly |
2 |
|
|
|
|
|
**Part-27-counterweight_thick |
4 |
|
|
|
|
|
**clamp_wire_breaker_RM |
2 |
|
|
|
|
|
**wire_breaker_prism |
1 |
|
|
|
|
|
**wire_breaker_secondary_metal |
2 |
|
|
|
|
|
**wire_extension |
4 |
|
|
|
|
|
|
|
|
|
|
|
|
*intermediate_assembly |
1 |
|
|
|
|
|
**intermediate_mass_new |
1 |
|
|
|
|
|
***B-Part-50-base internal box |
1 |
|
|
|
|
|
***B-Part-51-mass regulation centre of gravity |
1 |
|
|
|
|
|
***B-Part-51bis-mass regulation centre of gravity |
1 |
|
|
|
|
|
***Picomotor 8032-UHV |
2 |
|
|
|
|
|
***Molla di compressione |
1 |
|
|
|
|
|
***Part-20-security fixing |
4 |
|
|
|
|
|
***B-Part-62-cap |
1 |
|
|
|
|
|
***Assembly flag intermediate mass |
6 |
|
|
|
|
|
***Part-23-spacer spring |
2 |
|
|
|
|
|
***Part-32-nut magnet's plate |
1 |
|
|
|
|
|
***Part-35-cone |
1 |
|
|
|
|
|
***Part-33-nut for connection wire |
1 |
|
|
|
|
|
***Part10028-wire-intermediate-bottom filter |
1 |
|
|
|
|
|
***mass_compensation_top_cavity |
2 |
|
|
|
|
|
***mass_compensation_bottom_cavity |
2 |
|
|
|
|
|
***support_upper_mass |
4 |
|
|
|
|
|
***B-Part-54-support picomotor_new |
2 |
|
|
|
|
|
***C-Part-85-small support cables-25_new |
2 |
|
|
|
|
|
***B-Part-53-side_2_internal_box_new |
1 |
|
|
|
|
|
***Clamp_on_IM |
4 |
|
|
|
|
|
***B-Part-53bis-side_2_internal_box_new |
1 |
|
|
|
|
|
***alignment_slab |
2 |
|
|
|
|
|
***clamp_assembly_new |
2 |
|
|
|
|
|
***B-Part-52-side_1_internal_box_new |
1 |
|
|
|
|
|
*** B-Part-52bis-side_1_internal_box_new |
1 |
|
|
|
|
|
***B-Part-34-connection_main_wire |
1 |
|
|
|
|
|
***lock_internal_mass_assembly |
4 |
|
|
|
|
|
***wires_pair_RM_assembly |
2 |
|
|
|
|
|
***Part-10001-nuovo clamp of security bar |
2 |
|
|
|
|
|
***Part-10002-security-bar |
2 |
|
|
|
|
|
*** |
1 |
|
|
|
|
|
*** |
1 |
|
|
|
|
|
*** |
1 |
|
|
|
|
|
|
1 |
|
|
|
|
|
**C-Assembly external box_new |
1 |
|
|
|
|
|
***C-Part-73-lateral1_new |
4 |
|
|
|
|
|
***osem_new_with_individual_holder_IRM_lateral |
3 |
|
|
|
|
|
***C-Part-76-cover_external_box_new |
1 |
|
|
|
|
|
***C-Part-88-support spider |
3 |
|
|
|
|
|
*** osem_new_with_individual_holder_IRM_lateral |
3 |
|
|
|
|
|
***Part-10029-wire bottom filter-recoil mass |
3 |
|
|
|
|
|
***Part-10035-fastening suspesion wire |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
*security_frame_assembly |
1 |
|
|
|
|
|
**Part-10004-safety_structure_disk_2_new |
1 |
|
|
|
|
|
**Part-10022-security_intermediate_mass_new |
2 |
|
|
|
|
|
**Part-10007-rod security structure 526 |
4 |
|
|
|
|
|
**IRM_extension_inner_part |
4 |
|
|
|
|
|
**IRM_extension_outer_part |
4 |
|
|
|
|
|
**OSEM_holder_support_aid |
1 |
|
|
|
|
|
**OSEM_holder_support_aid_2 |
1 |
|
|
|
|
|
**Part-10009-rod security structure 650 |
3 |
|
|
|
|
|
**Part-10008-safety structure disk 3 |
|
|
|
|
|
|
**Part-10025-lateral security locking |
4 |
|
|
|
|
|
**Part-10023-clamp intermediate mass |
4 |
|
|
|
|
|
**security_frame_for_RM_assembly |
2 |
|
|
|
|
|
***Part-10021-lateral locking recoil mass |
2 |
|
|
|
|
|
***Part-10020-plate locking recoil mass |
2 |
|
|
|
|
|
**Part-10010-safety stucture disk double |
1 |
|
|
|
|
|
**Part-10006-rod security structure 515 |
3 |
|
|
|
|
|
**Part-10005-rod security structure 602 |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
404 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
01_updated_drawings.pdf |
SS hollow M12 bolt? |
|
|
1 |
380 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
02_updated_drawings.pdf |
AL adapter block? |
|
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
03_updated_drawings.pdf |
IM Assembly |
|
|
1 |
418 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
04_updated_drawings.pdf |
SS Hex ring |
|
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
05_updated_drawings.pdf |
Support for the COM regulation body |
|
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
06_updated_drawings.pdf |
IRM Safety Frame Inner Part |
|
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
07_updated_drawings.pdf |
Bottom cavity compensation mass |
|
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
08_updated_drawings.pdf |
Top cavity still compensation mass |
|
|
1 |
427 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
09_updated_drawings.pdf |
AL hollow cube? |
|
|
1 |
360 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
10_updated_drawings.pdf |
AL strut? |
|
|
1 |
433\434 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
11_updated_drawings.pdf |
SS wire standoff |
|
|
1 |
403 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\updated_drawings_payload |
12_updated_drawings_requires_update.pdf |
OSEM flag |
"needs update" |
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10300-Gr.13-Assembly B1A mirror-recoil mass.pdf |
Mirror\recoil mass assembly |
superseded? |
|
1 |
424 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10302-Gr.13-cilinder recoil mass.pdf |
Recoil mass cylinder |
|
|
1 |
(427) |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10303-Gr.13-flange recoil mass.pdf |
Recoil mass flange |
"superseded" |
|
1 |
(433\434) |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10304-Gr.13-Varia details.pdf |
|
|
|
1 |
438\440 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10305-Gr.13-large front recoil mass.pdf |
Recoil mass thick flange and small part |
|
|
1 |
513 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10306-Gr.13-Save mirror.pdf |
Mirror Shield |
|
|
1 |
514\515 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10307-Gr.13-small mirror.pdf |
Small mirror holder |
|
|
1 |
-> |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10308-Gr.13-Damper mirror.pdf |
Mirror damper assembly 404+632+633+634+635 etc |
|
|
1 |
632\633\634\635 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\original_drawings_Gr.13 |
10309-Gr.13-Damper mirror.pdf |
Mirror damper parts |
|
|
1 |
motor_support_rod_SF |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\Fishing_rod |
motor_support_rod_SF.pdf |
motor_support_rod_SF.pdf |
|
|
1 |
motor_support_rod |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\Fishing_rod |
motor_support_rod.pdf |
|
|
|
1 |
part-100new-main filter platform |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\Fishing_rod |
part-100new-main filter platform.pdf |
|
|
|
1 |
part-101new-blade central support |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\Fishing_rod |
part-101new-blade central support.pdf |
|
|
|
1 |
Part31new-part_plate_motor-1 |
VIS\CAD\TypeB\WorkSpace\Frame with B-1\NewDrawings\Fishing_rod |
Part31new-part_plate_motor-1.pdf |
|
|