Differences between revisions 2 and 3
Revision 2 as of 2020-06-10 17:58:22
Size: 859
Comment:
Revision 3 as of 2020-06-10 17:59:16
Size: 880
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
    Estimation of the IP coupling ratio: L2T, L2Y, T2L, T2Y, Y2L, Y2T
    IP DC actuators diagonalization: measuring the DC coupling of the IP by pushing it in DC along L, T, Y
    Optical levers diagonalization method similar to type A one and fixing scale by moving the IP. For Pitch dof we will discuss later.
    TM actuators diagonalization: using the DC method like IP and checking the residual coupling by injecting whit noise or an high frequency line.
    Sensor correction: we need to modify the real time model and if it will be available soon we are gonna to implement SC
    Check the diagonalization of the geophone.
    Blending: we have to measure the noise of the sensor by looking at the open loop spectra of geophones and LVDT.
    IP control filters tuning


    *
Estimation of the IP coupling ratio: L2T, L2Y, T2L, T2Y, Y2L, Y2T
    * IP DC actuators diagonalization: measuring the DC coupling of the IP by pushing it in DC along L, T, Y
    * Optical levers diagonalization method similar to type A one and fixing scale by moving the IP. For Pitch dof we will discuss later.
    * TM actuators diagonalization: using the DC method like IP and checking the residual coupling by injecting whit noise or an high frequency line.
    * Sensor correction: we need to modify the real time model and if it will be available soon we are gonna to implement SC
    * Check the diagonalization of the geophone.
    * Blending: we have to measure the noise of the sensor by looking at the open loop spectra of geophones and LVDT.
    * IP control filters tuning.

Describe KAGRA/Subgroups/VIS/OpsManual/TypeB/ControlWork01 here.

  • Estimation of the IP coupling ratio: L2T, L2Y, T2L, T2Y, Y2L, Y2T
  • IP DC actuators diagonalization: measuring the DC coupling of the IP by pushing it in DC along L, T, Y
  • Optical levers diagonalization method similar to type A one and fixing scale by moving the IP. For Pitch dof we will discuss later.
  • TM actuators diagonalization: using the DC method like IP and checking the residual coupling by injecting whit noise or an high frequency line.
  • Sensor correction: we need to modify the real time model and if it will be available soon we are gonna to implement SC
  • Check the diagonalization of the geophone.
  • Blending: we have to measure the noise of the sensor by looking at the open loop spectra of geophones and LVDT.
  • IP control filters tuning.

KAGRA/Subgroups/VIS/OpsManual/TypeB/ControlWork01 (last edited 2020-06-10 18:04:20 by fabian.arellano)