Diff for "KAGRA/Subgroups/VIS/Type-C"

Differences between revisions 114 and 133 (spanning 19 versions)

Type-C (TAMA) suspension

Type-C suspension is a relatively small double pendulum with intermediate mass passively damped with eddy current damping. Among the large suspensions used in KAGRA, type-C is the smallest one. Some of the type-C were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.

iKAGRA

In 2017, 5 Type-C suspensions are installed in iKAGRA.
In the final iKAGRA configuration, 7 mirrors are suspended and 6 of them are Type-C. Three are PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness with about 3cm, and 2 are TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of about 6cm. Other one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.
Work log about 2 iKAGRA ETMs is here.
ETM Transfer function
long term drift

Toward bKAGRA

Two suspensions that were used as at the X/Y end, will be used at IMMT for bKAGRA.
Memo by Yamamoto-san
IMMT Preparation
IMC Modification

bKAGRA

Design change for new suspensions

References

OSEM
Drawings
Magnet and standoff fixture jig

-  ⇤ ← Revision 114 as of 2016-03-01 12:16:43 → 
  Size: 860
  Editor: NaokoOhishi
  Comment:
+   ← Revision 133 as of 2017-11-17 12:11:47 → ⇥
  Size: 1550
  Editor: NaokoOhishi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-== Type-C suspension ==
+== Type-C (TAMA) suspension ==
 Line 3:
- Type-C suspension is relatively small double pendulum. Among the big suspensions used in KAGRA, type-C is the smallest. Some of them were once used for TAMA300, originally designed by K. Arai in 1990s. So "TAMA-type suspension" is Type-C suspension.
+ Type-C suspension is a relatively small double pendulum with intermediate mass passively damped with eddy current damping. Among the large suspensions used in KAGRA, type-C is the smallest one. Some of the type-C were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.
 Line 7:
- Five TAMA-type suspensions were used for iKAGRA.<<BR>>
 In the final iKAGRA configuration, 6 mirrors are suspended and 5 of them are Type-C.
 3 PO type; MC_i, MC_e, MC_o and 2 TM or RM type; ETMX, ETMY.
+ In 2017, 5 Type-C suspensions are installed in iKAGRA.<<BR>>
 In the final iKAGRA configuration, 7 mirrors are suspended and 6 of them are Type-C.
 Three are PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness with about 3cm, 
 and 2 are TM(test mass) or RM type; ETMX, ETMY with the mirror thickness of about 6cm.
 Other one is coming from CLIO, the size of the BS mirror was 4cm in thickness and 15cm in diameter.
-Line 12:
+Line 14:
+ * ETM Transfer function
 * long term drift
-Line 15:
+Line 20:
+ *Two suspensions that were used as at the X/Y end, will be used at IMMT for bKAGRA.
-Line 16:
+Line 22:
+ *[[KAGRA/Subgroups/VIS/Type-C/IMMT|IMMT Preparation]]
 *[[KAGRA/Subgroups/VIS/Type-C/IMC|IMC Modification]]
-Line 20:
+Line 27:
+=== References ===
 *OSEM
 *[[KAGRA/Subgroups/VIS/Type-C/Drawings|Drawings]]
 *Magnet and standoff fixture jig