Differences between revisions 4 and 116 (spanning 112 versions)
Revision 4 as of 2016-01-22 15:29:50
Size: 1277
Editor: NaokoOhishi
Comment:
Revision 116 as of 2016-03-01 12:34:02
Size: 1064
Editor: NaokoOhishi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
== iKAGRA ETM suspension Preparation; Current status == == Type-C suspension ==
Line 3: Line 3:
==== Schedule ====
 12th- (2 weeks) Disassembling and Washing (favorable)
 25th- (2 weeks) Assembling and Hanging
 1th Feb- coil winding, transportation to the End, installation test
 7th Feb- check
 15th installation
 Type-C suspension is a relatively small double pendulum with intermediate mass passively damped with eddy current damping. Among the big suspensions used in KAGRA, type-C is the smallest one. Some of the type-C were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.

=== iKAGRA ===

 Five TAMA-type suspensions were used for iKAGRA.<<BR>>
 In the final iKAGRA configuration, 6 mirrors are suspended and 5 of them are Type-C.
 Three are PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness with about 3cm, and 2 are TM(TestMass) or RM type; ETMX, ETMY with the mirror thickness of 6cm.
Line 10: Line 11:
==== Disassembling at Mitaka[Ohishi] ====
  finished. (12th-19th)
 [problem]
  * 2 nuts stuck: solved by Hirata-san
  * A Cu screw stuck: solved by Hirata-san
==== Washing [Hirata-san] ====
   most of the parts were washed.
 [problem]
  * ultra sonic washer broken 20th
  ordered on 22th(Fri) will be arrive at Mitaka on 26th(Tue)
  * 8 screws for adjusting the IM holding plate was dirty
   Solution: order new screws (not ordered yet)
==== Missing parts ====
 * coil bobbin [Takahashi-san]
 * coil winding [students of Ando-lab]
 * D-sub fixture plates [Takahashi-san]
 * mirror container [Tatsumi-san]
 * magnets for dummy mirror (4 ; 2-phi-L-5mm Nd magnets) [Ohishi]
 * some screws in replace with Cu screws [Ohishi]
  
==== pico-motors and PZTs ====
 Work log about 2 iKAGRA ETMs is [[KAGRA/Subgroups/VIS/Type-C/iKAGRA_ETM|here]].
Line 32: Line 13:
==== coil driver ==== === Toward bKAGRA ===
Line 34: Line 15:
==== cables ====  [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/VIS/iKAGRAbKAGRA|Memo by Yamamoto-san]]
Line 36: Line 17:
==== Assembling ====
 On 21th, suspension frame, security frame, xy stages completed [Tomaru]
=== bKAGRA ===
Line 39: Line 19:
==== Hanging ====
 

==== Transfer Function Measurement ====
 [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/VIS/Type-C/Design2016|Design change for new suspensions]]

Type-C suspension

  • Type-C suspension is a relatively small double pendulum with intermediate mass passively damped with eddy current damping. Among the big suspensions used in KAGRA, type-C is the smallest one. Some of the type-C were once used for TAMA300, originally designed by K. Arai in 1990s. So type-C suspension is sometimes called as TAMA-type suspension.

iKAGRA

  • Five TAMA-type suspensions were used for iKAGRA.
    In the final iKAGRA configuration, 6 mirrors are suspended and 5 of them are Type-C. Three are PO(pick-off) type; MC_i, MC_e, MC_o with the mirror thickness with about 3cm, and 2 are TM(TestMass) or RM type; ETMX, ETMY with the mirror thickness of 6cm.

    Work log about 2 iKAGRA ETMs is here.

Toward bKAGRA

bKAGRA

KAGRA/Subgroups/VIS/Type-C (last edited 2020-04-30 12:05:11 by KousekiMiyo)