Stuff for Type B to do in March 2018 while waiting for deliveries

* Build four geophone assemblies (Okutomi-kun has built five):

• Have most parts:
  • Four sets of canister parts (body, neck, head).
  • Five geophones.
  • Three circuit boards - probably more exist but need to find.
  • 20 x M8*35 (need 4*16=64)
  • 35 x M8*30 (need 4*8=32)
  • 4 x Viton disks (need 4? or 8?)
  • 123 M8 washers (need 4*24=96)

* Set up SR3 and SRM racks.

• Miyakawa-san gave us an empty rack for SR3 => can add boxes and do internal cabling and labels.

• SR3 rack position is decided (on -X,+Y corner of SR3 cleanbooth) => can do in-air cabling from rack to assembly frame.

• Miyakawa-san will soon give us an empty rack for SRM and decide position.

* Disassemble broken top filters

• Set up heavy table in SRM area (first floor, -X side).
• Find jig and blade tensioning screw.
• Remove blades from #3 (in SRM area).
• Store #3 in box.
• Remove floor panel in SRM second floor.
• Crane #1 (in SR3 area) to SRM area.
• Remove blades from #1.
• Put test weights on table.

* BF rebuild.

• Move BS Test Hang BF to tent and remove blades. (These blades are for BS-BF and will not be used again.)
• Find SR-BF blades that were removed to free up a BF base for the BS Final Hang.
• Move BF with tilted keystone to tent and remove blades.
• Characterize all SR-BF blades and choose two similar groups.
• Rebuild two filters.

* Etc

• Make one set of in-air pico splitter cables (triple and double) for SRM.
• Make three in-air stepper splitter cables for SR2, SR3 and SRM.
• Soak the sapphire prisms off the dummy BS for reuse on the SRM metal mass.

* Stuff to have done by other teams

• Add mushroom top to SRM tank.
• Put up safety bars