Differences between revisions 255 and 258 (spanning 3 versions)

Scraps of text for incorporation in the VIS Meeting Minutes

We finished tuning of BF No. 1.
- We wired the LVDT, Picomotor and StepperMotor of BF No. 1.
We finished tuning of BF No. 7.
- We wired the LVDT, Picomotor and StepperMotor of BF No. 7.
SF check (Hirata-san++).
- We checked the load capacity with and without the cap.
- We checked fit of caps. For the SF No.
- Add cable clamps to bases.
- Add cable clamps and Cu segments to caps (only if they fit well).
- Cable LVDTs and steppers.
We finished the SR3 in-air cabling.

KAGRA/Subgroups/VIS/TypeB/Minutes (last edited 2022-10-28 10:02:46 by fabian.arellano)

-  ⇤ ← Revision 255 as of 2018-03-23 11:19:20 → 
  Size: 1889
  Editor: EnzoTapia
  Comment:
+   ← Revision 258 as of 2018-03-29 17:51:00 → ⇥
  Size: 1653
  Editor: EnzoTapia
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 6:
-==== Report for week of 3/19 ====
 * Fujii-kun successfully assembled and tested a geophone pod (klogs 4492, 4508).
 * Hirata-san set up the dummy BS to soak off the sapphire prisms. (In process)
 * Shoda-san, Hirata-san and Enzo finished the assembly of 12 OSEMs. We still need to measure the maximum output (In process)
 * We will send the OSEMs to Kamioka today.
+==== Report for week of 3/26 ====


 * We finished tuning of BF No. 1.
  * We wired the LVDT, Picomotor and StepperMotor of BF No. 1.
  

 * We finished tuning of BF No. 7.
  * We wired the LVDT, Picomotor and StepperMotor of BF No. 7.
-Line 14:
+Line 18:
-==== Plan for week of 3/26 ====
 * Tanioka-kun joins.
 * Mark vacation.
 * Shoda-san at Mitaka
 * Others at Kamioka
 * --
 * Lay SR3 in-air cabling (Enzo++).
 * Finish tuning of BFs (Hirata-san++).
-Line 23:
+Line 19:
-  * Check load capacity.
  * Check fit of caps.
+  * We checked the load capacity with and without the cap.
  * We checked fit of caps. For the SF No.
-Line 28:
+Line 24:
+ * We finished the SR3 in-air cabling.