|
Size: 3203
Comment:
|
Size: 3503
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| Line 6: | Line 5: |
| ==== Report for week of 10/1 ==== ===== SR2 ===== * We solved a mystery with the height of the BF keystone: it turns out that running the table KOACH filters in the tank warms it up (by about 1.5°C) and causes significant sag (700 µm). D'oh! * We ran power to the pico drivers. * We got the lower section of the SR2 fairly well aligned with just a bit of adjustment with the IM pitch and roll picos. * We helped Lucia double-check the geometry of the IP - the current matrix calculation assumes the FRs and the LVDT sensors and actuators are colocated, which is much closer to true than for the BS, but not quite right. * We gave up on doing anything more with SR2 for now because we're waiting on extra extension cables for the PI and Fujii-kun will want to borrow one of the geophones next week for a huddle test with new geophones. ===== SRM ===== * We set the pitch of the SRM and RM, tightened the clamps and removed the winch system. * We installed the BF crossbars of the assembly frame and the BF ring section of the security structure. * We lifted the IM/... section on the load gauge to find its weight. * We craned in the BF and removed the cap. * We installed the BF-IRM rods and the IRM top plate. * We installed the BF-IM maraging rod and flying saucer cable clamps. * We suspended the IM/... section and adjusted the trim masses for balance and total mass. It took quite a lot of adjustment in each of pitch, roll and vertical. The vertical was due to the fact that the weight of the IM/... section is very close to that of SR2/SR3 but the SRM BF is about 0.5 kg weaker. The roll was due to the fact that the default configuration of trim mass had no correction for the horizontal wedge on the optic. However the pitch is a bit of a mystery - nearly all of the removed mass had to come off the AR side. Fortunately we were able to correct for it entirely with masses we had in hand. * We routed the TM OSEM cables via the flying saucer up to the underside of the BF. * We got 2 power supplies from Shimode-san so we can fire up the SRM rack next week. He will also supply suitable cables to connect the power supplies to the DC power strip in the rack. * We received the replated yoke for the SRM top filter. |
==== Report for the week of 4/15 ==== * Fabian debugged a dead stepper on SR3 (broken driver channel) and a dead geophone on SRM (unplugged cable). He made another update to the table used by the Python script for the stepper driver MEDM screen to reflect the remapping. * Fabian monitored the pumpdown and he and Hirata-san did post-pumpdown checks of all the suspensions. They were all healthy. * Hirata-san participated in the health checks and learned about the computer systems. * Mark did major revisions to the MEDM menu on the OVERVIEW screen with scripts for making `safe.snap` files and snapshots of setpoints. He made the `safe.snap` files in directories under `/opt/rtcds/kamioka/k1/target` into symbolic links to files in `/opt/rtcds/userapps/release/vis/k1/burtfiles`, alongside the setpoint files, so that they could be backed up to the SVN (as at LIGO). * Mark did major updates to his `vistools.py` Python package for manipulating the suspensions (based on his LIGO `sustools.py`). He added entries for Type B suspensions to the internal database and added commands for manipulating SET and DCCTRL blocks. He also added commands to simulate pressing on the `CLEAR HISTORY` and `LOAD COEFFICIENTS` buttons. * Mark started updating the `TYPEB.py` Guardian definition file to use `vistools.py`. So far only the `ENGAGING_IP_CONTROL` state has been fully rewritten and tested, but other states will be simple adaptations. It should be easy to do Type A and other Guardians in the same style. |
| Line 25: | Line 13: |
| ==== Plan for week of 10/8 ==== * Monday 10/8 is Sports Day. * Enzo returns Tuesday 10/9. * Mark and Terrence (plus TBD) at Kamioka Mon-Fri. * Enzo, Hirata-san, Fabian and Panwei at Kamioka Tue-Fri. ===== SR2/SR3 ===== * Terrence to set up LEN half of SR3 OL and, time permitting, TILT and LEN for SR2. ===== SRM ===== * Cable/test BF. * Install IRM. * Install/cable/test IM OSEMs. * Suspend/weigh/balance the BF/... section. |
==== Report for the week of 4/22 ==== * Fabian debugged an anomaly he found in the SRM (klog 8672) and found it was OK if the BF was high enough (klog 8733). * Mark and Terrence worked on improvements to the Guardian and the vistools.py package. * We debugged a problem where vistools.py triggered channel access timeouts when a Vis object was created in a live Guardian (it worked fine in a plain iPython session or the interactive mode of the Guardian). It turns out that in the live mode of the Guardian, the Ezca instance used for accessing the suspension is not a global variable (contrary to the documentation) but is associated with the GuardState class. Worse, creating a second Ezca instance upsets things. We came up with a workaround to grab and reuse the Ezca object already defined. * Mark added many new functions to vistools.py, including one to read the BIO WD status, and a group to manipulate the OLSET and OLDCCTRL filter blocks. * Terrence rewrote the TYPEB.py Guardian from scratch in terms of functions from vistools.py. * We removed the RESET state. * We renamed the DCCTRL_ONLY state to FLOAT and reimplemented it to switch the DCCTRL INPUT switches off (instead of the HOLD switches on). * We revised the OL_DAMPING_ENGAGED and neighboring states (ALIGN, MISALIGN etc). * We changed the RTMs to remove the TM_OSEM_DAMP blocks and to have the SET blocks connect only to the DCCTRL blocks (not the DAMP blocks). * We updated the PAYLOAD and OVERVIEW screens to reflect the RTM changes. We also fixed some broken links and fields related to the BIO functions. ==== Plan for week of 4/29 ==== * Glorious 10-day break! |
| Line 38: | Line 27: |
| ==== To-Do Lists, Schedule ==== * [[KAGRA/Subgroups/VIS/TypeB/ToDoBS]] * [[KAGRA/Subgroups/VIS/TypeB/ToDoSR]] * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7779|JGW-L1807779 Type B Schedule (SR)]] ==== Vacation/Visitor Info ==== * Enzo: 9/15 through 10/8 vacation in Chile. * Terrence: 10/8-12, 10/29-11/2 at Kamioka. |
==== Vacation/Travel Info ==== * Terrence's next visit from 4/18 to 7/27. * Fabian's vacation 4/25 to 5/10. * Mark's US vacation from 5/22 to 6/11. * Mark's final day 6/28. |
Scraps of text for incorporation in the VIS Meeting Minutes
KAGRA/Subgroups/VIS/MeetingNAOJ
Type B (Mark)
Report for the week of 4/15
- Fabian debugged a dead stepper on SR3 (broken driver channel) and a dead geophone on SRM (unplugged cable). He made another update to the table used by the Python script for the stepper driver MEDM screen to reflect the remapping.
- Fabian monitored the pumpdown and he and Hirata-san did post-pumpdown checks of all the suspensions. They were all healthy.
- Hirata-san participated in the health checks and learned about the computer systems.
Mark did major revisions to the MEDM menu on the OVERVIEW screen with scripts for making safe.snap files and snapshots of setpoints. He made the safe.snap files in directories under /opt/rtcds/kamioka/k1/target into symbolic links to files in /opt/rtcds/userapps/release/vis/k1/burtfiles, alongside the setpoint files, so that they could be backed up to the SVN (as at LIGO).
Mark did major updates to his vistools.py Python package for manipulating the suspensions (based on his LIGO sustools.py). He added entries for Type B suspensions to the internal database and added commands for manipulating SET and DCCTRL blocks. He also added commands to simulate pressing on the CLEAR HISTORY and LOAD COEFFICIENTS buttons.
Mark started updating the TYPEB.py Guardian definition file to use vistools.py. So far only the ENGAGING_IP_CONTROL state has been fully rewritten and tested, but other states will be simple adaptations. It should be easy to do Type A and other Guardians in the same style.
Report for the week of 4/22
- Fabian debugged an anomaly he found in the SRM (klog 8672) and found it was OK if the BF was high enough (klog 8733).
- Mark and Terrence worked on improvements to the Guardian and the vistools.py package.
We debugged a problem where vistools.py triggered channel access timeouts when a Vis object was created in a live Guardian (it worked fine in a plain iPython session or the interactive mode of the Guardian). It turns out that in the live mode of the Guardian, the Ezca instance used for accessing the suspension is not a global variable (contrary to the documentation) but is associated with the GuardState class. Worse, creating a second Ezca instance upsets things. We came up with a workaround to grab and reuse the Ezca object already defined.
- Mark added many new functions to vistools.py, including one to read the BIO WD status, and a group to manipulate the OLSET and OLDCCTRL filter blocks.
- Terrence rewrote the TYPEB.py Guardian from scratch in terms of functions from vistools.py.
- We removed the RESET state.
- We renamed the DCCTRL_ONLY state to FLOAT and reimplemented it to switch the DCCTRL INPUT switches off (instead of the HOLD switches on).
- We revised the OL_DAMPING_ENGAGED and neighboring states (ALIGN, MISALIGN etc).
- We changed the RTMs to remove the TM_OSEM_DAMP blocks and to have the SET blocks connect only to the DCCTRL blocks (not the DAMP blocks).
- We updated the PAYLOAD and OVERVIEW screens to reflect the RTM changes. We also fixed some broken links and fields related to the BIO functions.
Plan for week of 4/29
- Glorious 10-day break!
Vacation/Travel Info
- Terrence's next visit from 4/18 to 7/27.
- Fabian's vacation 4/25 to 5/10.
- Mark's US vacation from 5/22 to 6/11.
- Mark's final day 6/28.