Size: 3114
Comment:
|
Size: 2036
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 2: | Line 2: |
Line 5: | Line 4: |
* Type B Past Week Summary * Fabian took photos of the cleanroom in the ATC to help decide whether it is a good place to assemble PIs for Type A/B. * Hirata-san ordered and received wire for the BS and RM (will be cleaned 7/19). * Hirata-san received remachined locking parts for the IM (will be cleaned 7/19). * Hirata-san ordered additional Misumi parts to be used with the IM locking parts. * Fabian and Hirata-san weighed the masses that they've been constructing in the cleanroom and found a 600 g discrepancy from the Inventor (too light) for the IM. * Hirata-san ordered a medium-capacity scale to weigh the masses of the individual parts more precisely. * Hirose-san and his team successfully removed the misglued prisms from the dummy BS. * Fabian travelled to Kashiwa and removed most of the glue from the face of the dummy BS (where the flags had been). There is still some adhesive remaining on both the face and barrel, which will require more work and a second trip. * Shoda-san took a suitable segment of geophone noise data for analysis. Fabian will track down the calibration factors. * Type B ongoing issues * OSEMs * Akutsu-san is working to get wide-mouth OSEMs * Longer cables for BF->PI and SF->PI. * Connectors RECEIVED, cables being made. * SR machining test ongoing. * Lower breadboard stuff * Installation to be incorporated into the procedure document. Mark/Takahashi to discuss. * Breadboard springs (in manufacture, expected end of July) * Nail-head parts - RECEIVED. * Documents * BS Assembly Procedure [[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=4235| E1504235]], [[https://onedrive.live.com/redir?resid=D5CCFA70A378E0D0!195&authkey=!AM_usynuo9QI57g&ithint=folder,webloc|E1504235 draft]] * To-do list during Mark's vacation * Apply grease to jacks for assembly frame (Takahashi) * Finish assembly of BS IM, RM and IRM (Fabian). * Weigh IM/RM/IRM (Fabian, Hirata) * Pack/ship IM/RM/IRM to Kamioka (Hirata/Fabian). * Analyze geophone data (Mark, Shoda) * Remove glue from dummy BS face (Fabian) * Remove prism from dummy BS (Hirose, Fabian?) * Reglue flags and prisms (Tatsumi, Fabian) * Buy wire for BS and RM (Hirata) * Clean wire for BS and RM (Hirata) * Do fit/function test of winches (Fabian/Hirata) * Ship winches to Kamioka (Hirata/Fabian) * Work on BS simulation (Fabian) * Do Inventor assembly for SR2 in chamber and on assembly frame (Hirata) * Apply vacuum grease to jacks for BS assembly frame (Takahashi) * Write more of payload assembly procedure (Fabian) * Write more of main assembly procedure (Mark) * Longer term to-do list * Do BS Simulink model (Mark, Kokeyama) * Do 2D drawings of SR2 parts (Hirata) * Redesign SRx IM wire clamps for larger prisms, remachined RMs. * Order SRM/PRM parts (Hirata/Shoda) * Order SRx fasteners (Hirata) * Check SR RM machining test progress (Hirata) |
=== Type B (Mark) === ==== Report for the week of 4/1 ==== * Support of Type Bp * Hirata-san procured the jigs for PRs and Takahashi-san tested one at TAMA. * Hirata-san cleaned up the flags for PR2 and Mark did the one for PRM. * Fabian helped Fujii-kun and Takashashi-san to reglue the flags. * Mark did a lot of maintenance on the MEDM screens: * Made the name of the suspension more obvious (no yellow text!). * Added rack temperature indicators. * Fixed the labels in the ADC screen (to reflect the LEN OL moving from ADC#0 to #1). * Fixed broken links. * Committed files to the SVN. * Mark did maintenance on the Guardian to make it give more helpful messages in the TRIGGER state. Formerly it only checked the user model watchdog and the coil driver watchdog, not the DACKILL, and gave the same generic notification for both. Now it checks all three and tells the user which need attention. * Mark tidied up the cables in the SR2 rack and returned a large pile of no-longer-used cables to the tent. * Mark started a !HealthCheck page on the Operation Manual wiki. Fabian and Mark ==== Plan for week of 4/8 ==== * Mark, Fabian at Kamioka Mon-Fri. * Help with Type Bp. * Health checks on Type B. * Monitor pumpdown. * Work on Type B paper. * Modify RT models and/or Guardian to revert to the SAFE state under control in all but the most extreme emergency situations (rather than suddenly shutting off all output). * Tidy up. * Gather and clean tools. * Gather and organize unused parts and fasteners. ==== Plan for week of 4/15 ==== * Mark at Mitaka 4/15, Kamioka 4/16-18, f2f 4/19. * Fabian at Kamioka 4/15-18, f2f 4/19. ==== Vacation/Travel Info ==== * Mark at Mitaka 4/15. * f2f 4/19 (Friday), 4/20, 4/21. * Terrence's next visit from 4/18. * Fabian's vacation 4/26 to 5/10. * Mark's vacation from about 5/22 to 6/11. * Mark's final day 6/28. |
Scraps of text for incorporation in the VIS Meeting Minutes
KAGRA/Subgroups/VIS/MeetingNAOJ
Type B (Mark)
Report for the week of 4/1
- Support of Type Bp
- Hirata-san procured the jigs for PRs and Takahashi-san tested one at TAMA.
- Hirata-san cleaned up the flags for PR2 and Mark did the one for PRM.
- Fabian helped Fujii-kun and Takashashi-san to reglue the flags.
- Mark did a lot of maintenance on the MEDM screens:
- Made the name of the suspension more obvious (no yellow text!).
- Added rack temperature indicators.
- Fixed the labels in the ADC screen (to reflect the LEN OL moving from ADC#0 to #1).
- Fixed broken links.
- Committed files to the SVN.
- Mark did maintenance on the Guardian to make it give more helpful messages in the TRIGGER state. Formerly it only checked the user model watchdog and the coil driver watchdog, not the DACKILL, and gave the same generic notification for both. Now it checks all three and tells the user which need attention.
- Mark tidied up the cables in the SR2 rack and returned a large pile of no-longer-used cables to the tent.
Mark started a HealthCheck page on the Operation Manual wiki.
Fabian and Mark
Plan for week of 4/8
- Mark, Fabian at Kamioka Mon-Fri.
- Help with Type Bp.
- Health checks on Type B.
- Monitor pumpdown.
- Work on Type B paper.
- Modify RT models and/or Guardian to revert to the SAFE state under control in all but the most extreme emergency situations (rather than suddenly shutting off all output).
- Tidy up.
- Gather and clean tools.
- Gather and organize unused parts and fasteners.
Plan for week of 4/15
- Mark at Mitaka 4/15, Kamioka 4/16-18, f2f 4/19.
- Fabian at Kamioka 4/15-18, f2f 4/19.
Vacation/Travel Info
- Mark at Mitaka 4/15.
- f2f 4/19 (Friday), 4/20, 4/21.
- Terrence's next visit from 4/18.
- Fabian's vacation 4/26 to 5/10.
- Mark's vacation from about 5/22 to 6/11.
- Mark's final day 6/28.