Scraps of text for incorporation in the VIS Meeting Minutes

Mark created screens and a macro.txt file for the SR2 and linked to them from the VIS screen.
Enzo and Mark did a new overview screen for the BS.
Enzo added DIO cards to the rack and connected them to the coil drivers.
Fabian and Kozu-kun finished assembling the IM and tested the picos over their full range.
Mark and Hirata-san configured and aligned the assembly frame and optical table and craned in the IM ring.
Hirata-san noticed some oxidization on several of the L-brackets that will hold the IM horizontally, and we should get them cleaned or machined, but we can probably continue with hanging the system in the meantime.

Power outage 12/25.
Mark, Enzo, Fabian vacation
Shoda-san, Kozu-kun, Hirata-san at Kamioka - Hirata-san from Tue, others TBD.
Recover after power outage.
Create SR2 real-time model.
Install new jack receptacles (in SR3 area, second floor) on load gauge adapter (SR2 area, second floor). (Hirata-san)
Weigh IM (per Fabian's note in the paper log).
Remove L-brackets from bars on IM ring - send for cleaning/remachining.
Setup OL for checking pitch of SR.
Wipe/blow dust off SR2 frame.
Crane IM into frame.