1492
Comment:
|
← Revision 15 as of 2018-04-16 17:07:38 ⇥
1978
|
Deletions are marked like this. | Additions are marked like this. |
Line 2: | Line 2: |
== Parts/Screws == * Cu O-rings for geophones * As of 2018-04-15 * We have 3 x 150-mm and 4 x 80-mm ones. * We need 4 x 150-mm and 4 x 80-mm for SR * We need 3 x 150-mm and 3 x 80-mm if we service the BS geophones. * We need 1 x 150-mm and 1 x 80-mm spare. * -> ORDER 5 x 150-mm and 4 x 80-mm * Rubber pieces for geophones. * (3mm * ů77)*9 |
|
Line 5: | Line 16: |
* Multimeter (with ohmmeter and diode check function), e.g., [[https://www.monotaro.com/p/2091/7898/?gclid=Cj0KEQjwyZjKBRDu|Fluke 114]] | |
Line 9: | Line 19: |
* Crimping tool | * Extra crimping tool * Extra pin-removal tool * Needle-nosed pliers * Standard hex wrench set * Short hex wrench set |
Line 17: | Line 31: |
* Multimeter (with ohmmeter and diode check function), e.g., [[https://www.monotaro.com/p/2091/7898/?gclid=Cj0KEQjwyZjKBRDu|Fluke 114]] |
VIS Type B Wish List
Parts/Screws
- Cu O-rings for geophones
- As of 2018-04-15
- We have 3 x 150-mm and 4 x 80-mm ones.
- We need 4 x 150-mm and 4 x 80-mm for SR
- We need 3 x 150-mm and 3 x 80-mm if we service the BS geophones.
- We need 1 x 150-mm and 1 x 80-mm spare.
-> ORDER 5 x 150-mm and 4 x 80-mm
- As of 2018-04-15
- Rubber pieces for geophones.
- (3mm * ů77)*9
Tools we'd like soon
Right-angled forceps like these
41-mm wrenches (three if possible) for jacks on tanks, e.g., TOP RS-41.
Tools etc that it would be nice to have
- Extra crimping tool
- Extra pin-removal tool
- Needle-nosed pliers
- Standard hex wrench set
- Short hex wrench set
- Vibrating engraving tool
- More vacuum-compatible tags
- More vacuum-compatible heat shrink
- Bare or Kapton-coated Cu wire for use as cable ties