= VIS Type B Wish List =

== Parts/Screws ==
 * Cu O-rings for geophones
  * As of 2018-04-15
   * We have 3 x 150-mm and 4 x 80-mm ones.
   * We need 4 x 150-mm and 4 x 80-mm for SR
   * We need 3 x 150-mm and 3 x 80-mm if we service the BS geophones.
   * We need 1 x 150-mm and 1 x 80-mm spare.
  * -> ORDER 5 x 150-mm and 4 x 80-mm
 * Rubber pieces for geophones.
  * (3mm * ů77)*9

== Tools we'd like soon ==
 * Right-angled forceps [[http://www.sklarcorp.com/thoracic/grasping-forceps/mixter-right-angle-forceps.html|like these]]
 * 41-mm wrenches (three if possible) for jacks on tanks, e.g., [[https://www.monotaro.com/g/00198495/?t.q=top%20rs-41|TOP RS-41]]. 

== Tools etc that it would be nice to have ==
 * Extra crimping tool
 * Extra pin-removal tool
 * Needle-nosed pliers
 * Standard hex wrench set
 * Short hex wrench set
 * Vibrating engraving tool
 * More vacuum-compatible tags
 * More vacuum-compatible heat shrink
 * Bare or Kapton-coated Cu wire for use as cable ties

== Things already ordered ==

 * Multimeter (with ohmmeter and diode check function), e.g., [[https://www.monotaro.com/p/2091/7898/?gclid=Cj0KEQjwyZjKBRDu|Fluke 114]]
 * Nutdriver
 * DSub9 Breakouts, e.g., [[https://www.amazon.com/Uxcell-Female-Adapter-Terminal-Connector/dp/B01736DOS8/ref=pd_lpo_vtph_147_bs_t_2?_encoding=UTF8&psc=1&refRID=PE9ZD7W1SW6MQ28RT8Q6|male]] and [[https://www.amazon.com/Adapter-Terminal-Connector-Signal-Module/dp/B00WW6YU5G/ref=pd_bxgy_328_img_2?_encoding=UTF8&pd_rd_i=B00WW6YU5G&pd_rd_r=ZQHEDMT34ZQ3AD86MKC7&pd_rd_w=HKAX6&pd_rd_wg=QfWsw&psc=1&refRID=ZQHEDMT34ZQ3AD86MKC7|female]]. One set for use at the rack (dirty) and one set for use in the cleanbbooth (clean). (The one we have is [[https://www.amazon.com/Terminal-Block-Interface-Modules-FLKM-D/dp/B00MEIGAOG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1497833004&sr=8-1&keywords=FLKM-D+9+SUB%2FB|this one]] but it's ridiculously expensive and not even very convenient.)