VIS Meeting on 2015/11/27

2015/11/27 13:30 - 17:00

Kamioka NAOJ Room + SeeVogh

Participants:

Schedule

Schedule status (Aso)
- Latest schedule chart

PR

Test Hanging Status (Takahashi)
- A cable clamp to be attached to the suspension rod has a wrong size collet. Fabian will bring the proper collets from Mitaka. -> Status
Payload weight issue
- BF load check at the ATC: arrangement status
Digital system (Okutomi, Fujii)
Traverser actuation check (Shoda)
- Traverser cable has to be made (as a part of the cabling work) -> status
Clean work procedure (Aso)
- Particle count record: Shoda collected data, but don't know how to extract data. Takahashi will help it. -> Status
PR2 preparation (Mark, Fabian)
PR CAD model and assembly drawings (Hirata)
Cable status (Takahashi)
- Made a cable list -> Will upload it to Wiki with more information -> status
Call for shift for cable checking
- Ask the student if he can come on the week of 12/7 (Takahashi) -> status
Additional PR mirror box (Tatsumi):
Production of additional PR winches (Akutsu)
RM compensation mass
- Design status (Fabian): working on it now, but not yet finished. Will finish sometime this weekend. -> status
- Order status (Takahashi): Haven't yet gotten a quotation. Will order early next week. -> status
RM EQ stop screw position (Hirata)
- Out sourcing (Takahashi): Will ask for quotation with the RM compensation mass. All the plates are already sent to Mitaka. -> status
PR Optical Bench (Akutsu)
OSEM assembly status (Akutsu)
Next week (from 11/24) plan
- Test hanging
  - Mon:
  - Tue:
  - Wed:
  - Thu:
  - Fri:
  - Sat:
- PR2 preparation work
  - Mon:
  - Tue:
  - Wed:
  - Thu:
  - Fri:
  - Sat:
Travel (Week of 11/30)
- Takahashi:
- Shoda:
- Mark:
- Fabian:
- Okutomi:
- Fujii:
- Ishizaki:
- Hirata:
- Ohishi:
Travel (Week of 12/7)
- Takahashi:
- Shoda:
- Mark:
- Fabian:
- Okutomi:
- Fujii:
- Ishizaki:
- Hirata:
- Ohishi:

BS

CLIO BS
BS Assembly Frame Design (Aso, Hirata)
BS flag design (Mark, Fabian)
BS gluing jigs (Tatsumi)
Not enough crane height problem (Hirata, Saito)
IP base clamp (Fabian)
Bread board spring (Takahashi)
BS clean bag (Aso)

ETM

ETM installation procedure (Aso)
- Aso will compile the design information and send it to Mirapro by 11/25 -> status

Other

Watch dog system (Tanaka)
GAS blade inspection by Virgo (Takahashi)
- Waiting for shipping information: Takahashi-san will send Ando-san a reminder -> status
Request to the ATC for the next year
- We need to tell ATC our requests for the next fiscal year.
- Takahashi-san will send a plan to Akutsu-kun -> status
Safety at the site (Takahashi, Ishizaki)

Next meeting

2015/12/4 (Fri) 13:30 - @ Mitaka