Agenda/Minutes of the VIS Meeting on 2016/11/4

2016/11/4 13:30 -

Participants:

Progress report

Schedule Chart (PDF,MPP) To Be Updated

Type-A (Takahashi)

• Minutes of Type-A Meeting

• Installation: The review was held on 4th.
• Pre-isolator: The new shaft screws of motor were delivered. They will be replaced.
• EQ stop, release sensor, dummy payload: Production is on going.
• BF damper: Open bidding is on 9th.
• Maraging wire: New design was checked by CRY. Asking the company a quotation.

Type B (Mark)

• Type B Past Week Summary
  • Mark

    • Updated the BS circuit diagram D1503600:

      • Added information on the binary IO.
      • Renamed channels to conform to Okutomi-kun's new scheme.
      • Made the ADC/DAC channel assignment consistent and more logical.
      • Updated the stepper motor sections with info about the new driver chassis.
    • Worked on schedule.
    • Updated the installation procedure with lessons learned from the last few weeks.
    • Downloaded Hirata-san's Inventor model of the BS in the tank and starting thinking about installation of the suspension and lower bread board.
    • Mark and Hirata-san worked on collecting parts and tools that will be needed for cabling of the BS next week. (11 special-purpose cables need to be made for the picos/steppers/OSEMs/LVDT on the RM/IRM/IM/BF and, time permitting, 2 more for the SF.)
  • Hirata-san
    • Updated the BS 3D Assembly with the new rods and receptacles.
    • Made 2D drawings of SR2 and SR3 (ongoing).
    • Made SRM 3D assembly (ongoing)
    • Asked for and got quotes for hexagon cable clamps. Takahashi-san ordered the PEEK components. Next week Hirata-san will look for parts that should already be at Kamioka.
    • Washed screws for hexagon cable clamps and shim rings for Fabian.

Type-Bp (Shoda)

• Put a report here

IMMT (Ohishi)

• Put a report here

Watchdog system (Tanaka)

• Design and preparation(investigation of procurement) for production.PDF

• Will show the design at the next AEL meeting.--->Nov.14th.2016 15pm(Schedule of presentation for WDS.)

Safety

• Any issue ?

Discussion

• Any topics ?

Site work plan for the next week

• Mon: Accelerometer test, PR3 disassemble, Extended Chief Meeting
• Tue: BS Test Hanging, Accelerometer test, PR3 disassemble, Fire Drill
• Wed: BS Test Hanging, Accelerometer test, PR3 disassemble
• Thu: BS Test Hanging, PR3 disassemble
• Fri: BS Test Hanging, PR3 disassemble

Travel Plans

• Travel (Week of 11/7):
  • Takahashi: 7-9 (Extended chief meeting/Fire drill/Accelerometer test)
  • Shoda: 7-11 (Extended chief meeting/Fire drill/PR3 disassemble)
  • Mark: 8 - 11 (Fire drill/BS)
  • Fabian:
  • Okutomi: 7 - 11 (Extended chief meeting/Fire drill/Accelerometer test/Realtime code)
  • Fujii: ? (Fire drill)
  • Ishizaki:
  • Hirata: 8 - 11 (Fire drill/BS)
  • Sato: 7-9 (Fire drill/Accelerometer test)
  • Enzo: 8-11 (PR3 disassembly)
  • Ohishi:
• Travel (Week of 11/14):
  • Takahashi:
  • Shoda:
  • Mark:
  • Fabian:
  • Okutomi:
  • Fujii:
  • Ishizaki:
  • Hirata:
  • Sato:
  • Enzo:
  • Ohishi:

Next meeting

On 2016/11/11(Fri)

VIS F2F: Nov. 18, Dec. 2