Agenda/Minutes of the VIS Meeting on 2019/3/22

2019/3/22 13:30 -

Zoom Meeting

Participants:

Progress report

Schedule Chart

Site work schedule: [[|XLSX]]

Type-A : (PDF/MPP)

Type-B: (PDF/MPP)

Type-C: (XLSX)

Type-A (Takahashi)

Past week report

[X-end]

• Checked the BF. The chambers were closed completely.

[Y-end]

• Recovered the coil driver for IP.
• The channel of stepping motor driver for IP-H1 was broken. Changed the assignment of channel from "motor1" to "motor5".
• Adjusted the IP position to the initial one.

[Y-front]

• Assembled the cable for Pt100.

Plan for coming weeks

Type B (Mark)

Past week report

Plan for coming weeks

Type-Bp (Shoda)

Past week report

• The offsets for PRM-IM in P/Y in order to damp the main beam was confirmed with help of IOO team and Fabian, and they were (P, Y) = (-8000, -9500).
• Satellite boxes for PR2 and PRM are not yet replaced with the new ones.
• The LVDT board for BF-LVDT-V is not yet replaced/tuned.
• Somehow the PR2-IM was drifted largely in Yaw. Pulling back with the BF-pico will work though, we will want to check if the RM is still free from the frame maybe.

Plan for coming weeks

• Replace the Satellite boxes for PR2 and PRM with the new ones.
• Replace/tune the LVDT board for BF-LVDT-V.

OMMT & OSTM (Ohishi)

Past week report

Plan for coming weeks

VIS electronics (Tanaka)

Past week report

Plan for coming weeks

Other site works

Safety

• Incidents:
• Foreseen risks
  • Type-A:
  • Type-B:

Discussion

Travel Plans

• Travel (Week of 3/25):
  • Takahashi:
  • Okutomi:
  • Sato:
  • Lucia:
  • Fabian:
  • Mark:
  • Hirata:
  • Enzo:
  • Shoda:
  • Ohishi:
  • Fujii:
  • Tanioka:
  • Tanaka:
  • Terrence
• Travel (Week of 4/1):
  • Takahashi:
  • Okutomi:
  • Sato:
  • Lucia:
  • Fabian:
  • Mark:
  • Hirata:
  • Enzo:
  • Shoda:
  • Fujii:
  • Tanioka:
  • Terrence

Next meeting

On 2019/3/29(Fri)