Differences between revisions 14 and 15

Agenda/Minutes of the VIS Meeting on 2020/8/7

2020/8/7 14:00 -

Participants:

Progress report

[Miyo] Installed the Prequa system in TypeA
- (This week) Installation was finished. Now I try to diagonalize sensors and balance actuators by using the Prequa system.
- (Next week) I will do the modal damping on TypeA suspensions after the initialization work for sensors and actuators.

On Monday I submitted the paper to CPC: JGW-P2011860.
Noise budget paper: I calculated upper limits to DAC and coil driver noise contribution to DARM for the BS: klog 14875.

Noise budget paper: Fabian calculated upper limits to DAC and coil driver noise contribution to DARM for PRM: klog 14876.

Brainstorming meeting for IMMT2 modification was held yesterday. We discussed the modified shape of the outer frame and how to replace it. The plan is to replace the frame without removing IMMT2 from the chamber.

KAGRA is in "Upgrade phase for O4". PreQua system was implemented to the Type-A.
Confirmation of personnel at the site.
- Type-A team: Takahashi, Sato, Miyo, + Company(Jan-Apr)
- Type-B/Bp team: (Shoda,) Hirata, Fabian, Washimi, + Company(Oct-Dec)
Procedure documents are required by SEO.
- Type-A tower
- Limit switches
- Wire gluing in PR3 (by Shoda)
- Filter height adjustment in Type-B (by Fabian)
Schedule towards O4 (Chart) was revised.

cf. Post Obs. task (Request), Task for O3c (Plan, Sheet), Task towards O4 (List).

[Washimi] Room Temmperature report(https://www.icrr.u-tokyo.ac.jp/~washimi/KAGRA/SEM/fig_GAS/)
- We turned on the FFUs in CS and Y-end on 2020-8-3 to recover the room temperature (klog14851) ->RT becames about the same as before the heavy rain.
- BS temperature was droped (~0.6 degC) in this morning (klog14879) -> The Ondotori was dropped.

KAGRA/Subgroups/VIS/VISMinutes20200807 (last edited 2020-08-07 14:58:03 by RyutaroTakahashi)

-  ⇤ ← Revision 14 as of 2020-08-07 13:43:46 → 
  Size: 3690
  Editor: tatsuki.washimi
  Comment:
+   ← Revision 15 as of 2020-08-07 13:56:28 → ⇥
  Size: 3909
  Editor: naohisa.sato
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 30:
+ * Brainstorming meeting for IMMT2 modification was held yesterday. We discussed the modified shape of the outer frame and how to replace it. The plan is to replace the frame without removing IMMT2 from the chamber.