Differences between revisions 8 and 9
Revision 8 as of 2023-06-23 13:37:49
Size: 2447
Comment:
Revision 9 as of 2023-06-23 13:38:58
Size: 2442
Comment:
Deletions are marked like this. Additions are marked like this.
Line 37: Line 37:
 * Noise budget of the suspensions: PR2/3, Type-C, tower in the next time.  * Noise budget of the suspensions: PR2/3, Type-C, tower in the next.

Agenda/Minutes

Zoom Meeting


CRY+VIS Interface Meeting

Date: 2023/6/23 13:00-13:30

Participants: Takahashi, Miyaki, Uchiyama, Mitsuhashi, Ikeda, Ushiba, Akutsu, Yokozawa, Aso

Acceptance check document

Suspensions

  • Type-A: Measurements of noise budget in ETMY, ETMX, ITMX, and ITMY.
  • Type-B: Measurements of noise budget in BS.
  • Type-Bp: Measurements of noise budget in PRM
  • Type-C:

Other items

  • Oplev:
  • ACC:
  • Commissioning:
  • Vacuum system:
  • Heater control:
  • TMS:

Post O4a

  • Measurements of the DAC noise: Every Friday from 7/7.
  • Measurements on the sensor correction in SR2: 1 night.
  • Optimization of the damping control in PRs: Measurements 2 days, Test 3 days.
  • IP control with the ACCs: After the CAL week.
  • In-vacuum accelerometer for IOO: Check the geophone pod on 6/27.
  • Hight adjustments of Type-A in the cooling.
  • Measurement of the drum-head modes: 6/28.
  • Check of the length Oplev: At the time of the laser replacement.
  • Noise budget of the suspensions: PR2/3, Type-C, tower in the next.
  • Temperature control for the Oplev: Preparing for the heater controller. Making the cables.
  • Check of the space in the OMC/IMMT chamber: Sato-san made drawings for OMC.

Discussion


VIS Meeting

Date: 2023/6/23 10:00-11:00

Participants: Takahashi, Sato, Akutsu, Mitsuhashi, Tanaka, Ushiba, Aso

Summary Report

Type-A

  • Measured the noise budget in ETMY, ETMX, ITMX, and ITMY (GAS as well as cryo-payload).

Type-B

  • Measured the noise budget in BS.

Type-Bp

  • Measured the noise budget in PRM.

Type-C

Electronics

Control

R&D

  • Measured the resonant frequencies and the dependence in the center of gravity.
  • Transfer function in T-direction should be measured.

Toward O5

Schedule

  • Noise budget.

Safety

Discussion

  • Damping of the OMC suspension.
    • Design of the blade damper.
    • Design of the flexible pendulum damper.

Next meeting

  • 2023/7/7 10:00-

KAGRA/Subgroups/VIS/VISMinutes20230623 (last edited 2023-06-23 13:38:58 by RyutaroTakahashi)