= Optical Table Cover Review on 2019/07/02 13:00 - 13:30 =
Participants: Yutaro Enomoto, Shinji Miyoki, Yoichi Aso, Masayuki Nakano, Naohisa Satou, Ryosuke Sugimoto, Yuta Michimura

Zoom meeting: https://zoom.us/j/6676627462

== Materials ==
 * Optical Table Cover Drawings [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=10377|JGW-D1910377]]
 * Conceptual Design of Optical Table Cover [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=10129|JGW-T1910129]]
 * Drawings of Black Tube for AS Port [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=10037|JGW-D1910037]]

== Minutes ==
 * Check with Airtech on how to fix the FFU. From the bottom?
 * 2 holes for cables on each side. Make diameter from 60 mm to 100 mm
 * Removal panels with handles also for the sides
 * Holes for fiber poles must be at the edge of the panels.
 * Check how to remove the panels with handles.
 * Check the height of the cover if it interferes with clean booth poles
  * Checked on July 2 and it was OK
 * Check how to fill the gaps between panels and optical table surface