Differences between revisions 6 and 34 (spanning 28 versions)
⇤ ← Revision 6 as of 2020-06-01 09:37:15 →
Size: 4269
Editor: YutaMichimura
Comment:
← Revision 34 as of 2020-06-15 13:37:54 → ⇥
Size: 7231
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= ISC Meeting on 2020/06/15 14:00 - 15:00 =
Participants: 		= ISC Meeting on 2020/06/15 12:30 - 13:30 =
Participants: Haoyu Wang, Eleonora Caposcasa, Hiro Yamamoto, Keiko Kokeyama, Kentaro Somiya, Kiwamu Izumi, Koji Arai, Koji Nagano, Masayuki Nakano, Osamu Miyakawa, Ryutaro Takahashi, Tomotada Akutsu, Yoichi Aso, Yubo Ma, Takaaki Yokozawa, Yuta Michimura
Line 4: Line 4:
Zoom meeting: https://zoom.us/j/6676627462 Zoom meeting: https://zoom.us/j/7631499341

Time: https://www.timeanddate.com/worldclock/meetingdetails.html?year=2020&month=6&day=15&hour=3&min=30&sec=0&p1=248&p2=237&p3=4399&p4=137
Line 15: Line 17:
 * New members
  * Haoyu Wang (University of Shanghai for Science and Technology) [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11697|JGW-G2011697]]
  * Yubo Ma (Shanxi Datong University) [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11696|JGW-G2011696]]
Line 30: Line 36:
  * Carrier power recycling gain for PRMI (roughly 3) and PRFPMI (11-12) are too different, which could be due to the Lawrence effect [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=11633|JGW-T2011633]]
Line 39: Line 46:
  * FINESSE model originally by Kentaro Somiya   * FINESSE model originally by Kentaro Somiya [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=2434|JGW-T1402434]] (any updated version?)
Line 42: Line 49:
   * Also being used for simulating birefringence effects
  * Parametric instability		    * Also being used for simulating birefringence effects by Keiko Kokeyama [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=10461|JGW-G1910461]], [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=10380|JGW-T1910380]]
  * Parametric instability by Kiichi Kaihotsu, Kazuhiro Yamamoto
Line 45: Line 52:
  * Thermal lensing ?   * Thermal lensing by Kentaro Somiya ?
   * Thermal lensing in cryogenic sapphire mirrors should be small (orders of magnitude smaller than room temperature fused silica)
   * Thermal lensing in room temperature fused silica BS needs investigation
    * Rough estimation by Hiroaki Yamamoto shows it is OK-ish, comparing the result with aLIGO
    * Further investigation necessary (also for future higher power)
Line 51: Line 62:
   * Compare measured recycling gain (for carrier and sidebands) with simulations
Line 54: Line 66:
  * Thermal lensing in BS

 * Measurements necessary to do simulation work
  * PRC (SRC) length and Gouy phase
  * Schnupp asymmetry
  * modulation depth (arm cavity scan)
  * arm cavity length (arm cavity scan)
  * arm cavity round-trip loss measurement with birefringence effect correctly taken into account (with PBS at POP/POS and TRX/TRY) [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11633|JGW-T2011633]]
  * Power recycling gain for carrier and sidebands
  * Throughput from IMC output to AS RF, OMC DC, REFL, POP, TRX, TRY

 * Measurements necessary to compare the result with simulation
  * frequency/intensity noise coupling, down to ~10 Hz
  * Measure power recycling gain for sidebands (POP 2f with FPMI locked and PRFPMI locked)
  * DRFPMI LSC and ASC sensing matrix
    * LSC https://klog.icrr.u-tokyo.ac.jp/osl/?r=14515
  * MICH/PRCL/SRCL to DARM coupling
  * Measure MICH contrast defect with MICH locked and FPMI locked
  * OMC cavity scan to scan mode content of AS beam
  * https://docs.google.com/spreadsheets/d/1w4q8OvX9E6nkYSgshLYLoZH5yvQXHvGmL1agux8ztx0/edit#gid=0
  * Type-A, B, Bp actuation efficiency measurements (for actuator noise)

ISC Meeting on 2020/06/15 12:30 - 13:30

Participants: Haoyu Wang, Eleonora Caposcasa, Hiro Yamamoto, Keiko Kokeyama, Kentaro Somiya, Kiwamu Izumi, Koji Arai, Koji Nagano, Masayuki Nakano, Osamu Miyakawa, Ryutaro Takahashi, Tomotada Akutsu, Yoichi Aso, Yubo Ma, Takaaki Yokozawa, Yuta Michimura

Zoom meeting: https://zoom.us/j/7631499341

Time: https://www.timeanddate.com/worldclock/meetingdetails.html?year=2020&month=6&day=15&hour=3&min=30&sec=0&p1=248&p2=237&p3=4399&p4=137

Next meeting

TBD

back to Meetings page

Minutes

Agenda

  • New members

    • Haoyu Wang (University of Shanghai for Science and Technology) JGW-G2011697

    • Yubo Ma (Shanxi Datong University) JGW-G2011696

  • Useful links to know KAGRA interferometer design and status
  • Interferometer issues which require simulation studies
  • Status of simulation activities
  • Simulation activities necessary
    • LSC and ASC simulations with current ITMs and current interferometer setup
      • Especially LSC simulations not done for PRFPMI and DRMI, and 3f locking
      • Compare measured LSC and ASC sensing matrices with simulations
      • Compare measured recycling gain (for carrier and sidebands) with simulations
      • Compare measured AS mode content with simulations
      • Compare measured MICH/PRCL/SRCL controls noise coupling with simulations
      • Compare measured intensity/frequency noise coupling with simulations
    • Thermal lensing in BS
  • Measurements necessary to do simulation work
    • PRC (SRC) length and Gouy phase
    • Schnupp asymmetry
    • modulation depth (arm cavity scan)
    • arm cavity length (arm cavity scan)

    • arm cavity round-trip loss measurement with birefringence effect correctly taken into account (with PBS at POP/POS and TRX/TRY) JGW-T2011633

    • Power recycling gain for carrier and sidebands
    • Throughput from IMC output to AS RF, OMC DC, REFL, POP, TRX, TRY
  • Measurements necessary to compare the result with simulation

KAGRA/subgroup/ifo/MIF/Minutes20200615 (last edited 2020-06-15 15:21:06 by YutaMichimura)