Differences between revisions 1 and 7 (spanning 6 versions)
⇤ ← Revision 1 as of 2020-07-22 12:12:16 →
Size: 216
Editor: YutaMichimura
Comment:
← Revision 7 as of 2020-07-22 12:25:44 → ⇥
Size: 1406
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
Participants: Haoyu Wang, Keiko Kokeyama, Yoichi Aso, Yuta Michimura Participants: Haoyu Wang, Keiko Kokeyama, Masayuki Nakano, Yoichi Aso, Yuta Michimura
Line 7: Line 7:
 * Niigata  * Two students from Niigata University is starting FINESSE simulations. Keiko is giving lectures once a week via Zoom.
 * First step would be to make a simple shared FINESSE model without HOMs and confirm the model.
  * Keiko is making a DRFPMI FINESSE model independent from Somiya's model.
 * Some ideas to get Niigata students involved
  * Make their own small projects which do not require speed (e.g. check FINESSE results with analytical calculations etc.)
  * Make a GUI for FINESSE simulation. Web browser based? Jupyter?
   * Involve Yuzurihara-kun and Shoda-san!
 * Simulation projects once we are sure that the FINESSE model works fine.
  * Check if DRFPMI locking by slowly aligning SRM is feasible or not.
    * What are the impacts on the error signals (especially MICH) when SRC is swept from off-resonance (mis-aligned) to on-resonance (aligned)
  * Simulate the effect of birefringence (to LSC, ASC, laser noise couplings, recycling gain etc.)
  * AS mode content
  * Intensity/frequency noise coupling
 * '''A/I'''
  * Keiko will organize FINESSE meeting to discuss simulation activities and GUI work.
  * Set up a github for sharing FINESSE models.

Small meeting on FINESSE ISC simulations 2020/07/22 11:00 - 12:00

Participants: Haoyu Wang, Keiko Kokeyama, Masayuki Nakano, Yoichi Aso, Yuta Michimura

Zoom meeting: https://zoom.us/j/6676627462

Minutes

  • Two students from Niigata University is starting FINESSE simulations. Keiko is giving lectures once a week via Zoom.
  • First step would be to make a simple shared FINESSE model without HOMs and confirm the model.
    • Keiko is making a DRFPMI FINESSE model independent from Somiya's model.
  • Some ideas to get Niigata students involved
    • Make their own small projects which do not require speed (e.g. check FINESSE results with analytical calculations etc.)
    • Make a GUI for FINESSE simulation. Web browser based? Jupyter?
      • Involve Yuzurihara-kun and Shoda-san!
  • Simulation projects once we are sure that the FINESSE model works fine.
    • Check if DRFPMI locking by slowly aligning SRM is feasible or not.
      • What are the impacts on the error signals (especially MICH) when SRC is swept from off-resonance (mis-aligned) to on-resonance (aligned)
    • Simulate the effect of birefringence (to LSC, ASC, laser noise couplings, recycling gain etc.)
    • AS mode content
    • Intensity/frequency noise coupling

  • A/I

    • Keiko will organize FINESSE meeting to discuss simulation activities and GUI work.
    • Set up a github for sharing FINESSE models.

KAGRA/subgroup/ifo/MIF/Minutes20200722 (last edited 2020-07-22 12:25:44 by YutaMichimura)