= In-vac PD/QPD layout meeting 2025/02/28 =
Time: Feb 28, 2025 14:00-14:40

Participants: Ray-Kuang Lee, Huali Chen, Yoichi Aso, Yuta Michimura

Zoom meeting

== Minutes ==
 * Huali showed almost the final layout idea for AS RF and OMC REFL, with squeezing injection optics.
  * OSTM transmission seems different from CAD
   * Probably because OSTM wedge is not included in Huali's calculations
  * Add periscopes for AS RF in-vac path and OMC REFL path, and a beam diverter for AS RF in-vac path
   * Adding periscopes can reduce the height from approx. 210 mm to 4 inch, and we can use smaller and lighter pedestals
  * Check if OMC shroud is not conflicting
 * Next step is to collect comments for AS and to start REFL/POP planning
  * New student might be available
  * REFL/POP should be done by around summer

 * '''A/I'''
  * Update the layout to include periscopes and a beam diverter, add a wedge to OSTM and upload the layout to JGWdoc [Huali]
   * OSTM is 100 mm dia, 30 mm thick, with wedge of 2 deg
   * Thicker side is OMC side from the drawing, but actually installed flipped, so thinner side is OMC side (see Fig. 2 of [[https://klog.icrr.u-tokyo.ac.jp/osl/?r=30159|klog #30159]])
  * Find OMC shroud drawing [Michimura]
   * https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=15840
   * https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=15865
   * https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=16104
  * Updated layout will be shared with relevant people for comments [Michimura]
  * Collect information for REFL and start the REFL layout planning (... and POP next) [Michimura]
 * Next meeting: TBD on the week of March 24, with a new student