= ISC Task Assignment Plan 2015/8/10 =
A task with O mark means the assignment was confirmed

== iKAGRA ==
=== Management [Aso, Michimura] ===
 * Finalize the task list
 * Assign people to the tasks
 * Make a schedule for iKAGRA ISC tasks -> '''Important''': to be done first

=== Analog Electronics (MIF, IOO, AEL) ===
 * Complete the iKAGRA ISC electronics diagram  [Michimura] O
 * Make a cabling plan [Michimura] O
 * Installation of the ISC electronics for iKAGRA [Aso, Nakano] O

=== Integration with the Digital Control System (MIF, IOO, DGS) ===
 * Make a channel list for iKAGRA ISC (including whether each channel needs a whitening filter) [Kokeyama] O
 * Write ISC real time codes [Student + Kokeyama, Michimura] O
 * Create MEDM screens [Student + Kokeyama, Michimura] O
 * Write guardian scripts [Student + Kokeyama, Michimura] O

=== Cameras (AOS) ===
 * Decide where to put cameras [Aso, Kokeyama] O
 * Figure out how to mount the cameras [Aso, Kokeyama] O
 * Test the camera server [Kokeyama, Aso] O
 * Buy more cameras [Aso] O
 * Install the cameras [Kokeyama, Aso + Students] O

=== Optical Layout of the REFL bench (IOO) [Toyama Univ.] ===
 . -> '''To be confirmed'''

=== Initial Alignment (MIF) ===
 * Write a document of the initial alignment procedure for iKAGRA [Michimura] △
  . -> Eventhough the procedure may be changed at the site, it is important to have an official procedure and update it as we develop a better method.
 * Actually perform the initial alignment [Michimura + Students] O
  . -> Need coordination with VIS people (we need them at the site during the alignment work)

=== Commissioning of the Mode Cleaner (IOO) ===
 * List up measurements to be done with iKAGRA [Kawamura + everyone] -> '''To be confirmed'''

=== Commissioning of the Michelson ===
 * List up measurements to be done with iKAGRA [Aso + everyone] O

=== ISC Modeling (MIF, IOO) ===
 * Build a model of iKAGRA with Chris's noise budget code [Student + Michimura] O
 * Make a noise budget for iKAGRA -> feed this information to the commissioning task list [Student + Michimura] O

== bKAGRA ==
* Management [Aso, Michimura] O

 * Finalize the task list
  * Assign people to the tasks
 * Make a schedule for bKAGRA ISC tasks

* Interferometer optical simulations (MIF)

 * FFT simulations with realistic mirror maps [Hirose, Hiro Yamamoto] O
  * Decide whether IBF is necessary or not [Aso, Hirose, Somiya, Michimura] O
   . -> It is related to OMC and also the control of the auxiliary DOFs. '''Aso will propose how to organize the work.'''
  * Requirements on the PRG, intra-cavity power, contrast defects [JANGO] O -> '''Need to specify the task more in detail'''
  * Thermal lensing of the MIF mirrors [JANGO] O -> '''Need to specify the task more in detail'''

* ISC Modeling (MIF, IOO)

 * Build a model of bKAGRA with Chris's noise budget code [Students + Michimura] O
  * Fix the laser frequency stabilization servo design [Michimura, Aso] O

* AS Port Design (IOO)

 * Overall design of the AS optics (after SRM) [Somiya + Students] O
  * OFI design  [Somiya + Students] - > '''Pending'''
  * OMMT design [Somiya + Students] O
  * Steering mirrors ? [Somiya + Students]
  * OMC design [Somiya + Students] O
   * Setting OMC requirements or ITM polish requirements using simulations with real mirror maps [Somiya, Hiro Yamamoto] -> To be merged with the simulation tasks above.
   * Discuss with overseas groups about vibration isolation systems for OMC (and possibly other AS optics) [Somiya, Akutsu]

* Other Signal Ports (IOO) -> '''To be confirmed'''

 * REFL table optical design [Students + Kawamura]
 * POP table optical design [Students + Kawamura]
 * POS table optical design [Students + Kawamura]
 * POX/POY table optical design [Students + Kawamura]
 * In-vac PD design  [Doi, Aso]

* Laser Power Management (IOO, MIF, CRY)

 * How to change the laser power during the operation [Students + Kawamura] -> '''To be confirmed'''
 * Check the compatibility of the variable laser power with cryogenics [K. Yamamoto] -> '''To be confirmed'''
 * Beam shutters (in-air, in-vac) [Somiya + Students] O
 * High power beam damps [Akutsu] -> '''To be confirmed'''

* Initial Alignment (MIF)

 * Write a document of the initial alignment procedure for bKAGRA [Michimura] O

* Lock Acquisition (MIF, IOO)

 * Simulation of the signals with various interferometer configurations (DRMI, PRFPMI, etc) using Optickle and Finesse (cross check) [Students + Michimura, Aso] O
 * Design of the ALS -> '''To be discussed with Kawamura-san'' '''''
  * '''''Review the noise budget for the ALS [Students + Aso, Kawamura] '''''
  * '''''Make design drawings of the ALS [Students + Aso, Kawamura] '''''
 * '''''Deceide a scheme to generate f3 & f1 (AM) sidebands [Nakano, Michimura, Uehara, Somiya]  '''''
  . '''''-> This is probably within the scope of Nakano-kun's PhD project. '''''''To be confirmed with Kawamura-san''
 * Write a document for the lock acquisition procednure [Students + Aso] O

* Analog Electronics (MIF, IOO, AEL)

 * List up necessary ISC electronics for bKAGRA [Michimura, Aso] O
 * Draw an ISC electronics diagram for bKAGRA [Michimura] O
 * Make a cabling plan [Michimura] O

* Integration with the Digital Control System (MIF, IOO, DGS)

 * Write ISC real time codes [Student + Kokeyama, Michimura] O
 * Create MEDM screens [Student + Kokeyama, Michimura] O

* Cameras (AOS)

 * Decide where to put cameras [Aso, Kokeyama] O
 * Figure out how to mount the cameras [Aso, Kokeyama] O
 * Buy more cameras [Aso] O
 * Consider how to look at the cryogenic mirror surfaces (MIF, CRY) [Tomaru ?, Aso] -> '''To be discussed with Tomaru-san'''

* Commissioning (MIF)

 * Make a commissioning plan for bKAGRA [Aso + everyone] O