= 20180611 =
 * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=5241]]

== Today's activities ==
Workers: Akutsu, Ikenoue, Simon, L. Shimizu, Yokozawa
 * Took out the inner tower from the IXA chamber.
  * Was dangerous when it was hung up to float.
 * Inserted the NAB suspension into the inner tower.
  * Some screws were about to touch or going to touch the inner tower so we removed them.
  * There were several points to be noted so that the NAB suspension won't crash against the inner tower, so be careful.
 * Found everything are not fully consistent. Especially we needed to decide what should be used as reference. Today we used an array of through holes as the reference; the NAB suspension was somehow moved so that the interface through holes can overlap the screw hole array at the one side; the other side of the inner tower showed the through holes were totally useless to access the NAB suspension.
 * Then measured several parts.

== Wanted! ==
 * Long ruler; use with a laser lever
 
== Issues ==
 * We found installing the dampers is mostly impossible the current structure; !!!! Urgently discuss how to resolve this!!!!
 * We found the relative positions are not perfect and need to be resolved finally when the NAB would be suspended.

== Next plans ==
 * Insert the NAB+tower into IXA
 * Alignment and adjustment