Optical Lever (Room Temperature)

Related subgroups: VIS, IOO, MIF, VAC, CRY...

..Up

Scope

Sensing local motions including longitudinal dof and all alignment dofs (pitch, yaw and roll) of any mirrors supported by vibration isolation system.

Operating temperature: here the system is assumed to be utilized at room temperature, not in cryogenic temperature.

Applicable Documents

General Description

Receiver and Transmitter

Naming Conventions

TBD

Locations

• BS chamber
• ITM chambers (X,Y)
• ETM chambers (X,Y)
• PRC chambers (dummyPRC, PR2, PR3)
• SRC chambers (dummySRC, SR2, SR3)
• MC chambers (MC1, MC2...)

Requirements

• Sensor noise should be less than xxx.
• Sensor's dynamic range should be greater than xxx.
• At least horizontal degrees of freedom (X,Y)
• Preferably a vertical sensor (Z) and side
• The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.

Characteristics

TBD

Inspection plans

TBD

Procurement process and plans

TBD

Links

• JGW-­G1100418

• LIGO-T1000517, Optical levers Final Design Review for test masses, recycler mirrors and HAM optical benches

• LIGO-T1000533, Super-luminescent LED 21 and 50 day trend analysis

• LIGO-T1000390, Trade-off Study for the Optical Lever Light Source

• LIGO-T1000219, Test mass optical levers preliminary design