Size: 3317
Comment:
|
Size: 6449
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 5: | Line 5: |
=== Near ITM === | === ITM === |
Line 15: | Line 15: |
=== Near ETM === | === ETM === |
Line 28: | Line 28: |
=== Near BS === | === BS === |
Line 39: | Line 39: |
=== Near PRM === | === PRM === |
Line 48: | Line 48: |
=== Near PR2 === | === Faraday === * Detection optics for REFL === PR2 === |
Line 60: | Line 63: |
=== Near PR3 === | === PR3 === |
Line 68: | Line 71: |
=== SRM === * Suspended steering mirror(s) to lead the transmitted beam out of the vacuum chamber. * Detection optics for AS * AS Pick-off * AS RF PD/QPD (in vacuum ?) * Suspended mode matching telescope for OMC * Suspended OMC * In vacuum DC PD * Optical Lever * Local sensors to monitor the position of the mirror * At least horizontal degrees of freedom (X,Y) * Preferably a vertical sensor (Z) * The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts. * Suspended beam dumps for killing auxiliary beams (in vacuum). * CCD to look at the mirror surface. === SR2 === * Suspended steering mirror(s) to lead the green beam into the interferometer. * Injection/Detection optics for green laser. * Optical Lever * Local sensors to monitor the position of the mirror * At least horizontal degrees of freedom (X,Y) * Preferably a vertical sensor (Z) * The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts. * Suspended beam dumps for killing auxiliary beams (in vacuum). * CCD to look at the mirror surface. === SR3 === * Optical Lever * Local sensors to monitor the position of the mirror * At least horizontal degrees of freedom (X,Y) * Preferably a vertical sensor (Z) * The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts. * Suspended beam dumps for killing auxiliary beams (in vacuum). * CCD to look at the mirror surface. ---- == Total amount == For IFO optics ||Item|| ||ETMX||ETMY||ITMX||ITMY||BS||PRM||PR2||PR3|| || || || || || || || || || || || ||CCD|| || || || || || || || || || ||DC QPD|| || || || || || || || || || ||QPD for OL|| || || || || || || || || || ||Laser|| || || || || || || || || || ||Local sensor|| || || || || || || || || || ||Beam dump|| || || || || || || || || || For input optics: ||Item|| ||MC1||MC2||MC3||IMMT1||IMMT2||FI|| || || || || || || || || || || || || || ||CCD|| || || || || || || || || || ||DC QPD|| || || || || || || || || || ||QPD for OL|| || || || || || || || || || ||Laser|| || || || || || || || || || ||Local sensor|| || || || || || || || || || ||Beam dump|| || || || || || || || || || For output optics: ||Item|| ||OMMT1||OMMT2||OMC|| || || || || || || || || || || || || || || || || ||CCD|| || || || || || || || || || ||DC QPD|| || || || || || || || || || ||QPD for OL|| || || || || || || || || || ||Laser|| || || || || || || || || || ||Local sensor|| || || || || || || || || || ||Beam dump|| || || || || || || || || || For output ports: ||Item|| ||AP||REFL||POX||POY||TRX||TRY|| || || || || || || || || || || || || || ||CCD|| || || || || || || || || || ||DC QPD|| || || || || || || || || || ||QPD for OL|| || || || || || || || || || ||Laser|| || || || || || || || || || ||Local sensor|| || || || || || || || || || ||Beam dump|| || || || || || || || || || |
Auxiliary Optics Lists
This is a preliminary list of auxiliary optics, sensors and other stuff.
ITM
- Optical lever
- Local sensors to monitor the position of the test mass
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended baffles (suggested by Riccardo)
- Suspended beam dumps for AR reflected beams.
- CCD camera to look at the mirror surface.
ETM
- Suspended beam reducing telescope for transmitted beam.
- Vibration isolation requirement TBD
- Detection optics for transmitted beam, especially QPD (suspended ? in vacuum ?)
- Optical lever
- Local sensors to monitor the position of the test mass
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended baffles to kill scattered light (suggested by Riccardo)
- Suspended beam dumps for killing AR reflected beams.
- CCD camera to look at the mirror surface.
BS
- Suspended steering mirrors to lead the POX/POY beams out of the vacuum chamber.
- Detection optics for POX/POY.
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
PRM
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
Faraday
- Detection optics for REFL
PR2
- Suspended steering mirror(s) to lead the transmitted beam out of the vacuum chamber.
- Detection optics for POP.
- Injection/Detection optics for green laser.
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
PR3
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
SRM
- Suspended steering mirror(s) to lead the transmitted beam out of the vacuum chamber.
- Detection optics for AS
- AS Pick-off
- AS RF PD/QPD (in vacuum ?)
- Suspended mode matching telescope for OMC
- Suspended OMC
- In vacuum DC PD
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
SR2
- Suspended steering mirror(s) to lead the green beam into the interferometer.
- Injection/Detection optics for green laser.
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
SR3
- Optical Lever
- Local sensors to monitor the position of the mirror
- At least horizontal degrees of freedom (X,Y)
- Preferably a vertical sensor (Z)
- The sensors have to be rigidly mounted on the ground so that these are useful for remembering the position of the mirror and recording the drifts.
- Suspended beam dumps for killing auxiliary beams (in vacuum).
- CCD to look at the mirror surface.
Total amount
For IFO optics
Item |
|
ETMX |
ETMY |
ITMX |
ITMY |
BS |
PRM |
PR2 |
PR3 |
|
|
|
|
|
|
|
|
|
|
CCD |
|
|
|
|
|
|
|
|
|
DC QPD |
|
|
|
|
|
|
|
|
|
QPD for OL |
|
|
|
|
|
|
|
|
|
Laser |
|
|
|
|
|
|
|
|
|
Local sensor |
|
|
|
|
|
|
|
|
|
Beam dump |
|
|
|
|
|
|
|
|
|
For input optics:
Item |
|
MC1 |
MC2 |
MC3 |
IMMT1 |
IMMT2 |
FI |
|
|
|
|
|
|
|
|
|
|
|
|
CCD |
|
|
|
|
|
|
|
|
|
DC QPD |
|
|
|
|
|
|
|
|
|
QPD for OL |
|
|
|
|
|
|
|
|
|
Laser |
|
|
|
|
|
|
|
|
|
Local sensor |
|
|
|
|
|
|
|
|
|
Beam dump |
|
|
|
|
|
|
|
|
|
For output optics:
Item |
|
OMMT1 |
OMMT2 |
OMC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CCD |
|
|
|
|
|
|
|
|
|
DC QPD |
|
|
|
|
|
|
|
|
|
QPD for OL |
|
|
|
|
|
|
|
|
|
Laser |
|
|
|
|
|
|
|
|
|
Local sensor |
|
|
|
|
|
|
|
|
|
Beam dump |
|
|
|
|
|
|
|
|
|
For output ports:
Item |
|
AP |
REFL |
POX |
POY |
TRX |
TRY |
|
|
|
|
|
|
|
|
|
|
|
|
CCD |
|
|
|
|
|
|
|
|
|
DC QPD |
|
|
|
|
|
|
|
|
|
QPD for OL |
|
|
|
|
|
|
|
|
|
Laser |
|
|
|
|
|
|
|
|
|
Local sensor |
|
|
|
|
|
|
|
|
|
Beam dump |
|
|
|
|
|
|
|
|
|